AzureWave AW-GR520 Operation & User’s Manual

Text of AzureWave AW-GR520 User Guide:

• AzureWave AW-GR520, Wireless-Basic Encryption Type – WPA/WPA2 Mixed It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. 1. Select WPA/WPA2 Mixed mode. 2. Next to Cipher Suite, select TKIP or AES. 3. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server. 4. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port. 5. Next to RADIUS Server Shared Secret, enter the security key. 6. Click Appl

• Network-Dynamic DNS The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased (www.dyndns.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name to

• AzureWave AW-GR520, System-Firmware You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse button to locate the firmware file to be used then Click Update button. 28

• AzureWave AW-GR520, Environmental factors may adversely affect range READ Y WL AN LAN1 LAN2 LAN3 LAN4 INTERNET LED Indicator & Hardware overview The Front Panel The Back Panel Ready LED: A blinking light indicates that the AW-GR520 is ready. Local Network LEDs: A solid light indicates a connection to an Ethernet- enabled computer on ports 1-4. This LED blinks during data transmission. Internet LED: A solid light indicates connection on the Internet port. This LED blinks during data transmission. LAN Ports (1-4): Connect Ethernet devices such as co

• AzureWave AW-GR520, Firewall-VPN Pass Through IPSec Pass Through: IPSec (Internet Protocol Security) is a suite of protocols used to implement secure exchange of packets at the IP layer. To allow IPSec Pass through, click the Enabled button. To disable IPSec Pass through, click the Disabled button. PPTP Pass Through: PPTP (Point-to-Point Tunneling Protocol) Pass through allows the Point- to-Point (PPP) to be tunneled through an IP network. To allow PPTP Pass through, click the Enabled button. To disable PPTP Pass through, click the Disabled button. L2TP Pass Through: Layer 2 Tunneling Protocol is the method used to enable Point-to-Point sessions via the

• Network-WAN (Internet) DHCP -- Automatically Set Connection Type: Select DHCP-Automatically Set to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services. Host Name: The Host Name is optional but may be required by some ISPs. Domain Name: The Domain Name

• AzureWave AW-GR520, Firewall-MAC Filter Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) and wireless station computers by their MAC addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. Select Turn MAC Filtering Off, allow MAC addresses listed below, or deny MAC addresses listed. Disabled: Select this option if you do not want to use MAC Filter. Allow PC listed below to access this device,

• AzureWave AW-GR520, The Hardware Installation System Requirements Before installing the AW-GR520, make sure your system satisfies the following requirements. Desktop or Laptop with an Ethernet port Browser-Internet Explorer 5.5 or Firefox 1.0 above Wired or Wireless Network Adapter CD-ROM Drive Hardware Installation The AW-GR520 package comes together with a Non-detachable type-antenna to maximize its network operating range. 1. Make sure that all of your hardware is powered off, including the broadband modem and PCs. 2. Connect your broadb

• AzureWave AW-GR520, Firewall-Triggering This screen instructs the Router to watch outgoing data for specific port numbers. The IP address of the computer that sends the matching data is remembered by the Router, so that when the requested data returns through the Router, the data is sent to the proper computer by way of IP address and port mapping rules. Name. Enter the name of the application. Triggering Port. Enter the starting and ending port numbers of the triggered port range. Check with the Internet application documentation for the port number(s) and Protocol needed. Open Port. Enter the starting and ending port numbers of opened p

• AzureWave AW-GR520, [Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensko [Slovenian] Slovensky [Slovak] [Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Lietuvių [Lithuanian] Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Suomi [Finnish] [Valmistaja = manufacturer] vakuuttaa täten että

• AzureWave AW-GR520, Contents of Package: Azurewave AW-GR520 1 2 3 802.11 b/g Wireless Router Quick Installation Gui de User Manual on CD-ROM Power Adapter 5V/2.0A Ethernet Cable ※ If any of the above items are missing, please contact your retailer. System Requirements: 1. Browser-Internet Explorer 5.5 above or Firefox 1.0 2. Wired or Wireless Network Adapter 3. CD-ROM Drive 5

• AzureWave AW-GR520, COPYRIGHT AzureWave Technologies, Inc. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of AzureWave Technologies, Inc. DISCLAIMER AzureWave provides this document “as is”, without warranty of any kind, neither expressed nor implied, including, but not limited to, the particular purpose. AzureWave may make improvements and/or changes in this document or in the product described in this document at any time. This document could include technical inaccuracies or typographical errors. TRADEMARKS AzureWave

• AzureWave AW-GR520, Firewall-URL Filter URL Filters are used to deny LAN and wireless station computers from accessing specific web sites by the URL. A URL is a specially formatted text string that defines a location on the Internet. If any part of the URL contains the blocked word, the site will not be accessible and the web page will not display. To use this feature, Select Enabled then click New URL Button, enters the text string to be blocked and click Apply. The text to be blocked will appear in the list. To delete the text, click "delete Button." 22

• Firewall-Domain Filter Domain Filters are used to deny LAN and wireless station computers from accessing specific domain. Enter the keywords of Domain that you want to block (or allow). Any Domain with the keyword in it will be blocked. Disabled: Select this option if you do not want to use Domain filters. Allow to access domains listed below, others are blocked: Select this option to allow user

• AzureWave AW-GR520, Wireless-Basic Encryption Type – WPA2-PSK It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. 1. Select WPA2-PSK mode. 2. Next to Cipher Suite, select TKIP or CCMP (AES). 3. Next to WPA Pass Phrase (Pre-Shared Key), enter a key (pass phrase). The key is entered as a pass-phrase in ASCII format at both ends of the wireless connection. The pass-phrase must be between 8-63 characters. 4. Click Apply to save your

• AzureWave AW-GR520, System-Time The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the Time Server. Time Zone: Select the Time Zone from the drop-down menu. NTP server: Enter the NTP server. NTP is short for Network Time Protocol. NTP synchronizes computer clock times in a network of computers. This will only connect to a server on the Internet, not a local server. System-Config Save Configuration File: Use this option

• AzureWave AW-GR520, Status-Log The AW-GR520 router automatically logs (records) events of possible interest in its internal memory. If there isn’t enough internal memory for all events, logs of older events are deleted but logs of the latest events are retained. Refresh: Click this button to refresh the log screen. Clear: Click this button to clear the log entries. System: This field displays the AW-GR520 firmware was built time, firmware version, Host Name and Domain Name assigned to the router. WAN (Internet): Displays the MAC address and IP address assigned by ISP.

• AzureWave AW-GR520, Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Italiano [Italian] Latviski [Latvian] Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių [Lithuanian] Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Neder

• AzureWave AW-GR520, AW-GR520 Configuration The Router Status menu provides status and usage information. This page displays the current information for the AW-GR520. It will display the System (Firmware version) WAN (Internet), LAN, and Wireless. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP. If your Internet connection is set up for PPPoE or PPTP, a Connect button a

• AzureWave AW-GR520, Firewall-DMZ The DMZ screen allows one local user to be exposed to the Internet for use of a special- purpose service such as Internet gaming and videoconferencing. DMZ hosting forwards all the ports at the same time to one PC. The Port Range Forwarding is more secure because it only opens the ports you want to have opened, while DMZ hosting opens all the ports of one computer, exposing the computer to the Internet. Note: Placing a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort. To use this feature, select Enabled. To

• AzureWave AW-GR520, Network-WAN -- PPPoE Connection Type: Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. Select PPPoE (Username/Password) from the drop-down menu. User Name: Enter your PPPoE user name. Password: Enter your PPPoE password and then retype the password in the next box. Select either “Always connect” or “A

• AzureWave AW-GR520, Firewall-Internet Access The AW-GR520 router allows you to block the use of certain Internet services by computers on your network. This is called Internet Access blocking or port filtering. Enter a name for the rule and select a Service (HTTP, FTP….) from the drop-down menu. Select the Protocol TCP or UDP port that you want to block. You can enter a single port or a range of ports. When you have finished making changes to this screen, click the Apply button to save the changes. Disabled: Select this option if you do not want to block Internet services. Allow to access services listed below, oth

• AzureWave AW-GR520, Contents of Package System Requirements Introduction Product overview Key Features LED Indicator & Hardware overview LED Indicator Antenna Location The Hardware Installation System Requirements Hardware Installation Range of Operation How to Access the Web-based Utility Status-Main Page Log DHCP Client List Wireless Station List Network Connection type DHCP-Automatically Set Static IP PPPOE PPTP LAN Mac Clone Dynamic DNS UPnP Wireless Basic Encryption type 64bit/128bit WPA-PSK WPA2-PSK WPA-PSK/WPA2-PSK Mixed WPA Enterprise WPA2 Enterprise WPA/WPA2 Mixed 5 5 6 6 6 7 8 8 8 8 8 8 10 10 11 11 11 12 12 12 12 12 13 14 14 14

• Network-LAN This section will allow you to change the local network settings of the router and to configure the DHCP settings. IP: Enter the IP address of the AW-GR520 router. The default IP address is 192.168.0.1. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the configuration utility. Su

• AzureWave AW-GR520, Wireless-Basic Encryption Type – WEP 64/128bit It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. 1. Select Encryption Type to WEP 64/128bit. 2. Next to WEP Key Length, select the level of encryption (64 or 128-bit) and either Hex or ASCII. Hex - (recommended) Letters A-F and numbers 0-9 are valid. ASCII - All numbers and letters are valid. 3. Next to WEP Key 1, enter a WEP key that you create. Make sure you enter this key exactly on all your wireless devices. You may enter up to 4 different keys. 4. Click Apply to sa

Related Products and Documents (Wireless Router):

Comparable Devices:

Similar Resources:

• Linksys WET11 - Instant Wireless EN Bridge Network Converter (2 pages) WET11Included with the Linksys WET11 WirelessEthernet Workgroup Bridge• Linksys Instant Wireless™ Wireless EthernetWorkgroup Bridge (1)• One External Antenna (attached)• One Power Adapter (2)• One UTP Category 5 Cable (3)• One Setup CD-ROM with User Guide (4)• Quick Installation and Registration Card (notshown)A. Plug a crossover or straightcab …

• Polycom VSX5000 (6 pages) For suspended ceilings 2’ (.6 m) 10’ (3.1 m) 30’ (9.1 m) 50’ (15.2 m)Setting up the Polycom VSXCeiling Microphone Array1725-24157-001/A123a …

• Cisco WAP4410N - Small Business Wireless-N Access Point (5 pages) Data Sheet © 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 5 Cisco WAP4410N Wireless-N Access Point: PoE/Advanced Security Cisco Small Business Access Points Advanced, High-Performance Wireless Access for the Small Business Highlights ● Supports high-bandwidth applications with the 802.11n standard; …

• READING R24.0031.00 (2 pages) READINGTo use the broadband router, you must properly congure the network settings of your PCs and install the in-cluded setup program to setup the print server.Congure the network settingsIf the TCP/IP protocol is not yet congured on your PC, refer to the TCP/IP installation procedure below. If the TCP/IP protocol is congured, perform the follow …

• Dell 2350 - Wireless WLAN Broadband Router (89 pages) Dell™ Wireless 2350 Broadband Router User's Guide Technical Specifications and Regulatory Information: Technical SpecificationsRegulatory Information Wireless Interoperability The Dell Wireless 2350 products are designed to be interoperable with any wireless LAN product that is based on direct sequence spread spectrum (DSSS) and orthogonal frequen …

• Amplifi Cloud Router 5700 (2 pages) Manual SetupQuick Install GuidePackage ContentsIf any of the above items are missing, please contact your reseller.DIR-865L Ampli™ Cloud Router 570012Position your router close to your modem and a computer. Place the router in an open area of your intended work area for better wireless coverage.3 4Plug one end of the included blue Ethernet cable that ca …

Comments, Questions and Opinions: