Beckhoff CU8880-0000 Installation And Operating Instructions Manual

Text of Beckhoff CU8880-0000 User Guide:

• Table of contents CU8880-0000 1 Table of contents 1. General instructions 2 Notes on the Documentation 2 Liability Conditions 2 State at Delivery 2 Description of safety symbols 2 2. Product Description 3 Product Overview 3 Power Supply 4 Data connectors 4 USB type B Port (X20) (standard-cable) 4 RJ 45-Port (X10) (standard CAT5-cable) 4 LED Diagnostics 5 3. Inst

• Beckhoff CU8880-0000, General instructions 2 CU8880-0000 General instructions Notes on the Documentation This description is only intended for the use of trained specialists in control and automation engineering who are familiar with the applicable national standards. It is essential that the following notes and explanations are followed when installing and commissioning these components. Liability Conditions The responsible staff must ensure that the application or use of the products described satisfy all the requirements for safety, including all the relevant laws, regula

• Beckhoff CU8880-0000, Product Description CU8880-0000 3 Product Description Product Overview View of the CU8880-0000 The CU8880 USB-to-LAN adapter places an additional industrially-suited and independent Ethernet interface at the user’s disposal. In this way, four or more Ethernet interfaces can be implemented, depending on the system configuration. The CU8880 is used for necessary IT communication, so that the respective on-board Ethernet interfaces are available for EtherCAT or real-time Ethernet communication. Drivers for the USB-to-LAN adapter are available for Windows XP Professional, and Windows XP Embedded. • user-friendly installation via integrated top

• Beckhoff CU8880-0000, Product Description 4 CU8880-0000 Power Supply Power supply via USB-port The Ethernet controller does not need any additional power supply. The power supply (5 V DC) is realized by the USB connector. The LED P20 lights green when power supply is connected. Data connectors The connector are 1 USB port Type B and a RJ45-connector. The pins are described below: USB type B Port (X20) (standard-cable) USB type B Port Pin Signal 1 VCC 2 Data - 3 Data + 4 GND shield shield RJ 45-Port (X10) (standard CAT5-c

• Beckhoff CU8880-0000, Product Description CU8880-0000 5 LED Diagnostics LED Diagnostics The following table shows the possible states for the LEDs: LED Assignment Status Meaning off no power supply connected P20 power supply lights green 5 V DC via USB-Port off P10 Ethernet port lights green Ethernet Collision off P11 Ethernet port lights yellow Ethernet full duplex off P12 Ethernet port lights Ethernet Link off Ethernet Speed 10MBit P13 Ethernet port lights Ethernet Speed 100MBit

• Beckhoff CU8880-0000, Installation Instructions 6 CU8880-0000 Installation Instructions Please also refer to chapter General instructions. Transport and Unpacking The specified storage conditions must be observed (see chapter Technical data). Transport Despite the robust design of the unit, the components are sensitive to strong vibrations and impacts. During transport, the unit should therefore be protected from excessive mechanical stress. Therefore, please use the original packaging. Warning Danger of damage to the unit! If the device is transported in cold weather or is exposed

• Beckhoff CU8880-0000, Installation Instructions CU8880-0000 7 Mounting / Unmounting The CU8880 can be snapped onto a 35 mm mounting rail conforms to EN 50022. Mounting the Ethernet Controller Just push the unit on the upper side under the rail (figure 1) and snap in the lower side as shown below (figure 2): Unmounting the Ethernet Controller To release the CU8880 from the mounting rail pull down the locking clip with a screwdriver (figure 1) and pull off the device from the rail (figure 2):

• Installation Instructions 8 CU8880-0000 Connecting devices Warning The power supply plug must be withdrawn! Please read the documentation for the external devices prior to connecting them. During thunderstorms, plug connector must neither be inserted nor removed. When disconnecting a plug connector, always handle it at the plug. Do not pull t

• Beckhoff CU8880-0000, Operating Instructions CU8880-0000 9 Operating Instructions Configuration Software driver Drivers for the USB-to-LAN adapter are available for Windows XP Professional, and Windows XP Embedded. i Note The provided CD contains the according configuration software.

• Beckhoff CU8880-0000, Appendix 10 CU8880-0000 Appendix Assembly dimensions The product is characterized by small overall installed size. With a height of approx. 100 mm, the module dimensions exactly match those of the Beckhoff Bus Terminals. Together with the lowered connector surfaces, this means that it can be used in a standard terminal box with a height of 120 mm.

• Beckhoff CU8880-0000, Appendix CU8880-0000 11 Beckhoff Support & Service Beckhoff and their partners around the world offer comprehensive support and service, guaranteeing fast and competent assistance with all questions related to Beckhoff products and system solutions. Beckhoff branches and partner companies Please contact your Beckhoff branch office or partner company for local support and service on Beckhoff products! The contact addresses for your country can be found in the list of Beckhoff branches and partner companies: www.beckhoff.com You will also find further documentation for Be

• Beckhoff CU8880-0000, Appendix 12 CU8880-0000 Technical data Number of ports 1 USB-input type B 1 Ethernet interface with 10/100BASE-T-connector RJ45 Supported USB standard USB 2.0 Status display 5 LEDs USB wiring length maximum 1 meter Power supply power supply via USB input connector Max. current input from 5 V USB maximum 500 mA at 5V DC The following conditions must be observed during operation: Environmental conditions Ambient temperature: 0 to 55°C (operation) -25°C to +70°C (transport/ storage) Atmospheric humidity: Maximum 95%, non-condensing Vibration/ Shock resistance EN 60068-2-6 / EN 60068-2-27, EN 60068-2-29 EMC

Related Products and Documents (Network Router):

Comparable Devices:

Similar Resources:

• TP-Link TD-8817 (18 pages) 1 Turn off all of your network devices, including your computer and the Modem Router. If you currently use a modem, disconnect it now - the Modem Router will replace your current modem. Connect your computer to the Port labeled “LAN” on the Modem Router with an Ethernet cable. Connect the splitter to the wall jack using a telephone line, the …

• GRASS VALLEY BDS-1602CP (22 pages) MANUAL PART NO. 04-050466-002 Rev. 2MARCH 10, 2003 INSTALLATION MANUAL TRITON routing switcher Serial Digital Video Router 16x2 With Local Control Panel Product model no. TTN-BDS-1602CP the most watched worldwide …

• Niveo NGS24TP (2 pages) NGS24TP 24 Ports Nway Gigabit Ethernet Switch Quick Installation Guide FCC Warning This device has been tested and found to comply with limits for a Class A digital device, pursuant to Part 2 and 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when …

• Asus DSL-AC750 (120 pages) Quick Start GuideDSL-AC750Dual-band 802.11ac VDSL/ADSLModem RouterU12788 / First Edition / August 2017Dual Band 802.11acWi-Fi ADSL / VDSL Modem RouterU12788_DSL-AC750_QSG_168x125mm.indb 1 2017/8/21 17:59:17 …

• Raritan Dominion KX III (6 pages) Dominion KX III User Station QSG 1 QSG-KX3UST-1D-v3.1.0-E  255-62-0010-00 RoHS Dominion KX III User Station Thank you for purchasing Raritan's Dominion KX III User Station, a high-performance appliance dedicated to access Raritan's enterprise-class Dominion KX III KVM-over-IP switches with anytime, anywhere access. This Quick Setup Gui …

• Cisco WS-C4900M (276 pages) Cisco® Nexus 7000, Catalyst® 6500 and Catalyst 4500 Series Modular SwitchesCisco Nexus 5000, Nexus 3000, Catalyst 4900, Catalyst 3750-X, Catalyst 3750, Catalyst 3560-X, Catalyst 3560, Catalyst 2960-S, Catalyst 2960, and Fixed-Conguration Switches, Cisco Nexus 2000 Fabric Extender, Nexus 4000 Blade Switches, Nexus 1000V Virtual Switches, and OpticsCisc …

Comments, Questions and Opinions: