Manualios.com

Pioneer Brite Striper 2000 Instruction Manual & Parts List

  • Brite Striper 2000 Lawn and Garden Equipment
  • mai/lSJxpgY7k
  • Instruction Manual & Parts List
  • PDF / Adobe Acrobat Reader
  • 20

Pioneer Brite Striper 2000 Manual Online:

4.65, 2118 votes
Pioneer Brite Striper 2000 User Manual
Pioneer Brite Striper 2000 User Guide
Pioneer Brite Striper 2000 Online Manual

Text of Pioneer Brite Striper 2000 User Guide:

  • 2000 Versatility The MODEL 2000 handles all athletic field needs with ease. So simple to operate that any- one can do a professional job. 5-YEAR WARRANTY AGAINST “RUST OUT” Ample 12 gallon paint tank tackles large striping needs in a snap. Pioneer’s 5-year war- ranty (against rust) is on the stainless steel paint tank. BUILT STURDY FOR YEARS OF SERVICE Honda 4 H.P. en

  • Pioneer Brite Striper 2000, PN08018 THE BRITE STRIPER ® 2000 ASSEMBLY INSTRUCTIONS Tools Necessary for Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Removing from Shipping Carton . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Handle Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Speed Control Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Adjustable Spray Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 OPERATION & CARE Before Starting.

  • Pioneer Brite Striper 2000, 1 REV 2/08 If you have any questions concerning the assembly or operation, please call our CUSTOMER SERVICE DEPARTMENT at 800.877.1500. TOOLS NEEDED FOR ASSEMBLY 1 - 5/8" Open End Wrench 1 - 7/16" Socket 1 - 7/16" Open End Wrench 1 - Crescent Wrench (Vise Grips may be substituted) Allen Wrenches (supplied in hardware kit) ASSEMBLY INSTRUCTIONS FOR BRITE STRIPER ® MODEL #2000 After Removing Box from Shipping Carton: STEP 1. Remove Brite Striper 2000 – two people necessary to lift STEP 2. Remove handle ba

  • Pioneer Brite Striper 2000, 2 MODEL 2000 STEP 4. SPEED CONTROL CABLE PARTS REQUIRED: Throttle Control Cable is already attached and pre-set at Speed Control Lever. 2 - 3/4" x 1/4" - 7/16" Hex Head Bolts 2 - 7/16" Hex Head Self Locking Nuts TOOLS REQUIRED: 7/16" Socket 7/16" Open End Wrench Step 1: Line up holes in speed cable bracket with the holes on front side of engine base. Step 2: Insert 7/16" hex head bolts through holes and attach 7/16" hex head self-locking nuts then tighten. Step 3: Remove cotter pin from clevis pin and set aside.

  • Pioneer Brite Striper 2000, 3 REV 2/08 STEP 5. Adjustable Spray Box Parts required: a. Snap ring b. Adjustable spray box Step 1: Slide adjustable spray box bar on the front axle Step 2: Attach carriage bolt, washer, lock washer and wingnut Step 3: Attach snap ring on end of axle to prevent spray box bar from sliding off Step 4: Attach free end of paint line hose to shut-off valve and Tighten with 5/8” wrench (DO NOT OVER TIGHTEN). MAKE SURE NOZZLE TIP IS ALIGNED HORIZONTALLY WITH GROUND. Use supplied Allen Wrenches to adjust side plates for proper width. Adjust bar height by loosening wing nut and setting desired height, retighten wing nut. Side plates may need to be adjusted up o

  • 4 MODEL 2000 BEFORE STARTING The 2000 STRIPER is shipped with engine oil. Be sure to check the en- closed Operating and Maintenance instructions for proper oil. Follow fill- ing directions. 1.Carefully read and follow instructions for starting and maintaining the engine (in a separate booklet furnished with your machine). 2.Check all hose connections and fittings making sure they are ti

  • Pioneer Brite Striper 2000, 5 REV 2/08 CARE AND OPERATION OF PAINT TANK UNIT DIRECTIONS FOR OPERATING: 1. Remove pump assembly by raising locking lever to vertical position, and turning counter- clockwise until ends of locking lever reach slots in locking ring; lift out. 2. Mix paint (in pail - not in tank) and strain through cloth or fine sieve. Paint Strainer Fil- ters packaged 25 per case are available. Use item #PS 25 when ordering. 3. Fill tank 3/4 full, leaving remaining space for compressed air. 4. Replace pump assembly in tank, holding locking

  • Pioneer Brite Striper 2000, 6 MODEL 2000 OPERATION OF MACHINE 1. Check to make certain that brass bleed-off valve (located on cross fitting) is in closed position so air will not escape. 2. Make certain that your V-belt is tight. WARNING: NEVER OPERATE UNIT WITHOUT BELT GUARD IN PLACE. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY OR DAMAGE. 3. Test run the machine with water to see how it operates. You may wish to practice using paint in an off-area before starting your job. 4. Start your engine. Allow compressor to build up pressure in your paint tank from 40 to 45 PSI at which point air will automa

  • Pioneer Brite Striper 2000, 7 REV 2/08 PARTS LIST BRITE STRIPER ® MODEL 2000 KEY# PART # DESCRIPTION 1 1503 Hand Grip 2 1505 Paint Control Lever 3 1636 Paint Control Cable 4 2071 17” Airline Hose 5 0311 Low Pressure Gauge 6 0104 Brass Tee with Nipple Fitting 7 1532 Check Valve 8 2021 Rear Wheel - - 1218 Wheel Bearing 9 1630 Compressor - - 1618 Compressor Pulley 10 0096 Brass Nipple 11 1629 Safety Relief Valve (comp.) 12 1638 50” Paint Line Hose 13 2004 Front Axle 14 1635 Shut-Off Valve Assy. 15 1541 Single Spray Nozzle Assy. - - 1523 Two Head Sprayer Assy. 16 1524 Side Plate - - 1544 Side Plate Clamp Set 17 1546 Spray Box Support Arm 18 2030 Height Adjustment Bracket 19 2020 Front Wheel - - 2055 Hub Front Wheel

  • Pioneer Brite Striper 2000, 9 REV 2/08 STRIPING TIPS When striping always have the machine in motion before opening the spray valve, thus eliminating a heavy “blob” of paint at the beginning. If striping on an asphalt or concrete surface you may have a build-up of paint on the edges of your line. This can be corrected by adjusting the tip so the fan spray is angled at 45 degrees to each side plate. Adjust so spray barely touches plates and your build-up will be eliminated or reduced. Call for other spray tips. When releasing pressure on the paint tank, hold a rag over th

  • Pioneer Brite Striper 2000, 10 MODEL 2000 CLEAN-UP OF THE TANK UNIT 1. Discharge remaining paint through drain hose (supplied with unit) into clean container. Cap container tightly for next use. 2. Shut off gas engine. 3. Release pressure in the paint tank with brass bleed-off valve. WARNING: NEVER USE ANY TOOL TO REMOVE PUMP IF THERE IS PRESSURE IN THE TANK. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY OR DAMAGE. 4. Remove Pump Assembly. Hose the inside of the tank to remove any excess paint. Fill tank 3/4 full with wate

  • Pioneer Brite Striper 2000, 11 REV 2/08 CLEAN UP TIPS All parts of your PIONEER Brite Striper ® 2000 should be cleaned immediately after each use. We recommend Pioneer P.H.D. Cleaner. A clean, lint-free rag should be used to wipe dry the inside of the tank. A final step should then be to remove the nozzle caps and clean the nozzle tips and screens. This can easily be done by placing all three parts into a small can of soapy water and allowing them to soak for a few minutes. An old toothbrush can be used for stubborn spots. Rinse Nozzle Assembly parts with clean water and allow to air dry. Do not store with pump locked in tank, leave loose. CAUTION: DO NOT USE WIRE OR ANY OTHER OBJECT T

  • Pioneer Brite Striper 2000, 12 MODEL 2000 TROUBLE SHOOTING Brite Striper ® Model #2000 STRIPER DOES NOT STRIPE FULL LINE 1. Was paint strained? 2. Check paint level. 3. Check nozzle screen for clogs. Clean as needed. 4. Check nozzle tip for proper alignment — horizontal. 5. Check operating pressure — is air releasing through safety release valve on compressor? 6. Check airline hose fittings — tighten as needed. 7. Check pulleys and belt. Adjust as necessary. 8. Check shut-off valve for clogs — clean. Adjust control cable. 9. Check paint line hose for clogs — clean. HAND HOSE ASSEMBLY DOES NOT SPRAY PROPERLY 1. Check nozzle, screen and tip for clogs — clean as needed. 2. Check op

  • Pioneer Brite Striper 2000, 13 REV 2/08 AIR LEAKS PUMP ASSEMBLY LEAKS AIR 1. Shut off machine. 2. Bleed pressure from paint tank. 3. Remove pump assembly and check tank gasket for damage – replace if needed. Re-seat in pump assembly. Do not overtighten. 4. Check that brass tube is threaded tightly against top of pump assembly. Also, check plastic cup at bottom of shaft for excessive wear. Repair with pump assembly and shut-off repair kit. AIR LINE HOSE LEAKS AIR 1. Check air line hose for breaks/cuts. Replace as needed. 2. Tighten air line hose fittings. STRIPER WILL NOT ROLL EASILY 1. Wheels should spin freely –

  • Pioneer Brite Striper 2000, CALL OUR CUSTOMER SERVICE REPS FROM 8:00a.m. - 5:00p.m. (EST) 1-800-877-1500 with any questions you may have concerning the care, assembly, operation, or maintenance of this product. Before you call be sure that unsatisfactory operation is not due to inadequate care or cleaning, abuse, or neglect. This may save you time and money. See our warranty for specific coverage. IF YOU SHIP THE PRODUCT PRIOR AUTHORIZATION MUST BE RECEIVED BEFORE RETURN Carefully pack unit and send it prepaid and adequately insured. Attach a postage-affixed letter, detailing the complaint, to the outside of the carton. BE SURE TO SHOW RET

  • Pioneer Brite Striper 2000, LIMITED WARRANTY For a period of three years from date of purchase, PIONEER MANUFACTURING COMPANY will replace for the original PURCHASERS, any part or parts* of the line Striper (a five (5) year limited warranty against rust-out on stainless steel tanks), found upon examination by a PIONEER FACTORY-trained representative, to be defective in material or workmanship or both; this is the exclusive remedy. This warranty is pro-rated as to cover 100% of the cost of materials, parts and labor for the first twelve months of ownership, 60% the second twelve months, and 4

  • Pioneer Brite Striper 2000, to order BRITE STRIPER® Accessories also available from Call 800.877.1500 • Exclusive formula includes propri- etary brightener for the brightest, whitest lines. • The brightener are enhanced by video receptors so lines seem to glow on T.V. • Thicker richer formula is higher in density and solids. • Enhanced formula performs up to 50% longer. • Due to more Halogen® 2000 and Optiwite™ optical brightener, lines are up to 500% brighter under UV light and 35% brighter un sunlight. MAX™ STENCILS The Ultimate Field Marking Paint • Specially designed to clean Pioneer Athletic Field Marking Machines. • Biodegradable • Contains no flammable solvents •

  • Easy-to-Use •Homogenized to prevent separation in the container. •Finely ground ingredients will not clog your machine. Convenient •Painted areas are ready to use in one hour. •Equipment can be washed with soap and water. Applications •Football & Soccer Fields •Walkways • Campsites •Band Practice Areas •Tracks • Golf Courses •Volle

Related Products and Documents (Lawn and Garden Equipment):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Monte Carlo Fan Company 5RDR Series Owner's manual and installation manual monte-carlo-fan-company/5rdr-series-611.pdf 13 Jan 2024 10
2 Sierra Wireless Sprint 598U Operation & user’s manual sierra-wireless/sprint-598u-2NL.pdf 02 Feb 2024 48
3 Bionaire CM1 Instruction manual bionaire/cm1-XJ9.pdf 08 Jul 2022 36
4 Fisher-Price TRACKMASTER T0787 Assembling instructions fisher-price/trackmaster-t0787-363.pdf 19 Aug 2022 1 0.39 Mb
5 Twin-Star International DFS-760-1 Operating manual twin-star-international/dfs-760-1-XU7.pdf 18 Aug 2022 29
6 MSI 880GM-E41 series Operation & user’s manual msi/880gm-e41-series-P2T.pdf 24 Aug 2023 98

Similar Resources:

  • Craftsman

    EZ 917.270810

    (60 pages)
    Owner's Manual[RAFTSM N °19.5 HPELECTRIC START42" MOWER6 SPEED TRAN_RA-X-L-ELAWN TRAGT4 IModel No.917.270810• Safety• Assembly• Operation• Maintenance• Repair Parts+CAUTION:Read and follow allSafety Rules and Instructionsbefore operating this equip-ment.For answers to your questionsabout this product, Call:1-800-659-5917Sears Craftsman H …
  • Flymo

    MOW N VAC

    (12 pages)
    GBIMPORTANT INFORMATIONRead before use and retain for future referenceDEWICHTIGE INFORMATIONBitte vor dem Benutzen des Gerätes durchlesenund gut aufbewahrenFRRENSEIGNEMENTS IMPORTANTSA lire avant usage et à conserver pour référenceultérieureNLBELANGRIJKE INFORMATIELeest u deze informatie voor het gebruik enbewaar ze voor toekomstige raadplegingNOVIKTIG …
  • Craftsman

    28934

    (64 pages)
    Operator's Manual(RRFTSMRN°LAW TRACTOR22 HR* 42" MowerElectric StartAutomatic TransmissionModel No.917.28934, EspaSoI, p. 33IThis product has a low emission engine which operates Idifferently from previously built engines. Before you start theIengine, read and understand this Owner's Manual.iMPORTANT:Read and follow all SafetyRules and instru …
  • Craftsman

    917.272660

    (60 pages)
    Owner's ManualIC..FTSMeWlLAWN TRACTOR17.0 HI:',42" MowerElectric StartAutomatic TransmissionModel No.917.272660[_ This product has a low emission engine which operatesdifferently from previously built engines. Before you start theengine, read and understand this Owner's Manual.IMPORTANT:Read and follow all SafetyRules and Instructions bef …
  • Gronomics

    MRGW 34-48

    (2 pages)
    www.gronomics.com East Bethel, MN USA 763-753-7374ContinuedModular Rustic Garden Wedge(34”W x 48”L x 32”H - 18D) Assembly InstructionParts ListITEM QTY. PART # DESCRIPTION1 4 CP41 Corner Post, 3-1/4” x 3-1/4” x 41-1/4”2 8 R4501 Front & Back Side Rails, 45” x 5-5/8 x 13/16”3 2 ES2613L End Side Rails, 26-3/8” x 5-1/2” x 13/16”4 2 ES …
  • Craftsman

    536.270282

    (100 pages)
    Operator's ManualI CRRFTSMI:1N°I • Safety• OperationMid-Engine Rider = Maintenance• Parts13.5 HP. Electric Start30" Mower / MulcherHydrostatic DriveModel536.270282CAUTION: Before using thisproduct, read this manualand follow all of its SafetyRules and OperatingInstructions.Manual del usarioTractor cortacesped con motorsituado detras del asie …

Comments, Questions and Opinions: