BenQ VB Series Installation And Operation Manual

Text of BenQ VB Series User Guide:

• BenQ VB Series, English Disclaimer This company makes no representations or warranties, either expressed or implied, with respect to the contents of this document. This company reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes. Copyright All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, opt

• BenQ VB Series, Table of Contents i English Introduction ..................................................................1 Coverage of digital TV signals ............................................... 1 Package contents..................................................................... 1 Installing the DTV tuner box .......................................2 Scanning and storing digital TV channels and radio stations ....................................................................................

• Introduction 1 English Introduction Digital TV (DTV) is a new technology for broadcasting TV signals. As its name suggests, signals of TV programs are modulated and transmitted digitally, providing higher picture and sound quality and additional information (for example, interactive features and EPG (Electronic Program Guide), depending on the services available in your

• BenQ VB Series, Installing the DTV tuner box2 English Installing the DTV tuner box Before installing the DTV tuner box, please pay attention to the following to ensure the safety of installation: • Wear suitable protective insulation gloves to prevent any possibilities of injuries. • Peel off the protective film on the DTV tuner box prior to installation. • Be sure to turn the display power off and disconnect the power cord from the power outlet. Turn the power of the devices off and remove all connected signal cables if the disp

• BenQ VB Series, Installing the DTV tuner box 3 English 4. Peel off the protective film on the DTV tuner box and then insert the tuner box into the slot as shown. Pay attention to the direction of the tuner box when inserting. 5. Push the DTV tuner box all the way into the slot. 6. Use the supplied screw and a suitable screwdriver to secure the DTV tuner box on the display. 7. There are two connectors on the DTV tuner box: one for aerial antenna input and the other for loop-through output of signals to other devices. Connect the aerial antenna (to be purchased separ

• Installing the DTV tuner box4 English Scanning and storing digital TV channels and radio stations Before you can start viewing digital TV programs and listening to digital radio broadcasts, you need to let the DTV tuner box scan and store the digital TV channels and radio stations available in your area. This process is only necessary when you install the DTV tuner box for the first time,

• Enjoying digital TV and radio 5 English If there are new digital TV channels or radio stations in your area, you can refer to "Adding new digital TV channels and radio stations" on page 9 to add them to the channel memory. Now you are ready to enjoy the digital TV programs and radio broadcasts. For more information, please refer to: • "Viewing digit

• BenQ VB Series, Enjoying digital TV and radio6 English Adjusting the volume • Press 音量 (Volume) + on the remote control to increase volume. • Press 音量 (Volume) - on the remote control to decrease volume. Mute setting Press 靜音 (Mute) on the remote control to turn off the sound temporarily. Press 靜音 (Mute) once more, or press 音量 (Volume) + or + to restore sound level. Displaying/hiding the Channel List Press OK to display the Channel List that contains information about available channels. Press OK again to hide the Channel List and resume normal viewing. You can

• BenQ VB Series, Enjoying digital TV and radio 7 English • Press 節目導覽 (EPG) to hide the EPG. Displaying/hiding current program information • Press the Green button to display the detailed information about the currently viewing program. - Press the Red button to view the complete description (if available). - Press the Blue button to exit. Detail 行動電視 DiMo 09:30-10:30 台灣心動線 第 34 集紀錄報導 Extend Page up 2007/10/02 09:55 When viewing a digital TV program, you can press 資訊顯示 (Information) on the remote control to display the information about that program. The information displayed is dependent upon the data transmitted from the digital TV sta

• BenQ VB Series, Enjoying digital TV and radio8 English Listening to digital radio broadcasts If radio broadcasts are available in your area, you can also use the DTV tuner box and your display to listen to digital radio. If the DTV tuner box is installed for the first time, please refer to "Scanning and storing digital TV channels and radio stations" on page 4 to complete scanning the storing the digital radio stations in your area. 1. Press 電視 / 數位電視 (TV/DTV) on the remote control to enter the DTV mode. 2. Press 目錄 (Menu) to display the OSD menu. 3. Press + or - to select TV, and then press OK. 4. Press�

• BenQ VB Series, Setup 9 English Setup Adding new digital TV channels and radio stations If there are new digital TV channels and radio stations available in your area after the initial installation of this DTV tuner box, you can perform the following steps to add them to the channel memory. 1. Press 電視 / 數位電視 (TV/DTV) on the remote control to enter the DTV mode, and then press 目錄 (Menu) on the remote control to display the OSD menu. 2. Press + or - to select TV, and then press OK. 5. The DTV tuner box will start scanning available digital TV channels and radio stations and save them to the memory. Please be patient as

• Setup10 English Editing channels Skipping channels You can use this function to skip unwanted channels so when using the 頻道 (Channel) /button to sequentially change channels, these skipped channels will not be displayed. You can also cancel skipping these channels if necessary. You can still press the numeric channel selection buttons on the remo

• BenQ VB Series, Setup 11 English Deleting channels You can use this function to delete unwanted channels from the channel memory. Once deleted, these channels cannot be selected by using either the 頻道 (Channel) / button or the numeric channel selection buttons on the remote control. If you later wish to view these channels, you need to add them to the channel memory again (See "Adding new digital TV channels and radio stations" on page 9). 1. Press 電視 / 數位電視 (TV/DTV) on the remote control to enter the DTV mode, and then press 目錄 (Menu) on the remote

• BenQ VB Series, Setup12 English Changing channel location (number) After initial installtion, channels are arranged by the order when they are first scanned and stored in the channel memory. If necessary, you can use this function to change the location (number) of channels. 1. Press 電視 / 數位電視 (TV/DTV) on the remote control to enter the DTV mode, and then press 目錄 (Menu) on the remote control to display the OSD menu. 2. Press + or - to select TV, and then press OK. 7. To move other channels, repeat step 4 through 6. 8. Press 回上頁 (Back) several times to close the Channel Editor menu. 3. Press or to select Channel Editor, and then press OK. 4. The Channel Editor

• BenQ VB Series, Setup 13 English Setting up favorite channels You can set your frequently viewed channels as your favorite channels. Once set, you can press 喜愛頻道 (Favorite) on the remote control to select these channels quickly from the favorite list. 1. Press 電視 / 數位電視 (TV/DTV) on the remote control to enter the DTV mode, and then press 目錄 (Menu) on the remote control to display the OSD menu. 2. Press + or - to select TV, and then press OK. 6. To set up other favorite channels, repeat step 4 and step 5. 7. Press 回上頁 (Back) several times to close the Channel Editor menu.

• BenQ VB Series, Troubleshooting14 English Troubleshooting If you encounter problems, please refer to the troubleshooting tips below. If the problem still persists, please contact the service center for help. Symptom Possible Cause No channels, or only few channels are scanned and stored. • Check the aerial antenna connection. Make sure that it is correctly and firmly connected to the DTV tuner box. • Not all digital TV channels are available in your area. Please refer to "Coverage of digital TV signals" on page 1 to check the digital TV signal coverage in your area. • The signal can be too weak to be scanned and stored. Have a professional antenna technic

More Instructions:

BenQ VB Series Installation and operation manual 19-12-2023 34

DOWNLOAD

Related Products and Documents (TV Tuner):

Comparable Devices:

Similar Resources:

• Elgato EyeTV Hybrid (1 pages) TV Tuner Stick for HDTV & Analog TVDatasheetAll-in-One TV for your Mac or PCEyeTV Hybrid is a TV tuner stick for analog cable or digital antenna that delivers live television to your Mac or PC. Elgato’s smallest hybrid TV tuner ever, EyeTV Hybrid is wonderfully versatile. It’s the right choice if you get your TV signal from basic analog (unscrambled) …

• TerraTec Cinergy C PCI HD (2 pages) All company names and trademarks are registered trademarks and brand names of their respective owners. © TERRATEC-NOXON Vertriebs GmbH · Subject to change without notice.Cinergy C PCI HD · Version 16.10.2012 · Page 1• DVB-CTVandradiotuner• HDsupportforMPEG2andH.264• AC3DolbyDigital• Expandablefor …

• Pioneer GEX-6100TV (45 pages) ORDER NO.PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2002 GEX-6100TV/U …

• Elgato EyeTV Hybrid (8 pages) Quick Start GuideConnect DVB-T antennaWhat’s in the boxConnect active antennahybridhybridhybridhybrid Stick Antenna Remote USB Cable Video Cable CD Quick Start GuideConnecting the rod antennaPull off the grey protective cap and connect EyeTV Hybrid to a free USB 2.0 port on your computer. You can connect the stick directly or via the supplied USB ex …

• Arris TIVO EDGE FOR CABLE (2 pages) 0103STEP02STEPSTEP04STEP05STEPSETUP & PRODUCT FEATURESWELCOME TO THE TIVO EDGE FAMILY. Say hello to TV heaven. TiVo EDGE puts all the smile-making, heart-swelling, nail-biting entertainment out there in one perfect place. When you can’t wait to watch your favorites, just speak into the remote and TiVo EDGE searches across live TV, your recordings and …

• Avermedia Cardbus MCE MPEG 2 (2 pages) Hardware MPEG 2 PCMCIA TV Tuner ► Build-in Hardware MPEG 2 Encoder ► Certified for Windows XP Media Center Edition 2005 ► Watch and Record TV on Windows XP and MCE 2005 Laptop computer ► Time Shifting function for pause and rewind live TV ► EPG Scheduler for schedule recording AVerMedia AVerTV™ CardBus MCE Watch and …

Comments, Questions and Opinions: