JetPad 100 Owner's Manual

Text of JetPad 100 User Guide:

• 2 Directions Meaning of icons: Forbidden: Avoid improper operations to prevent damaging the Tablet PC. Caution: Cautions to operators to avoid potential damage. Please note and remember. Importance: Important information, common notes, definitions, general knowledge and references, etc. Other trademarks and trade names may be used in this manual

• JetPad 100, 3 Content Directions.......................................................................................................................... 1 Safety Precautions ........................................................................................................... 4 1 Knowing Your Tablet PC............................................................................................... 5 1-1 Top Side.................................................................................................................. 5 1-2 Top Side.

• JetPad 100, 4 Safety Precautions 1. DO NOT press the LCD Screen with force. DO NOT place the Tablet PC with small items, they may scratch LCD Screen or enter the Tablet PC. 2. DO NOT expose the Tablet PC to dirty or dusty environments. Keep the environment clean and dry. 3. DO NOT place the Tablet PC on uneven or unstable work surfaces. 4. DO NOT place or drop objects on the top of the Tablet PC. DO NOT shove any foreign objects into the Tablet PC. DO NOT press hard on the LCD screen. 5. DO NOT expose the Tablet PC to strong magnetic or electrical fields. 6. DO NOT leave the Tablet P

• JetPad 100, 5 1 Knowing Your Tablet PC 1-1 Top Side 1. Built-in Camera Enable or disable the camera function by using “Notebook Manager” software. 2. LCD Touch-sensitive Screen 3. Up/Down Direction Button 4. OK Button 5. (To open the “Notebook Manager” window) 6. Light-Sensor Indicator 1-2 Top Side 1. Bulit-in Microphone Jack 2. Charge Indicator Light is orange during charging and is green during normal operation; light turns off when the battery is fully charged and

• 6 1-3 Left Side 1. Ethernet/LAN Port 2. MINI-VGA Port 3. SIM Card Port (Optional) 4. USB Port (2.0) 5. SD/MMC Card Port 6. Microphone Jack 7. Headphone Jack 8. Speakers 9. Power Jack USB devices can only be inserted in one orientation. Force to insert the card may in result of damage. The transfer cable (included) is necessary for connecting the VGA. 1-4 Bot

• 7 2 Caring for the Tablet PC The Tablet PC is a precision device; misuse may damage the device. 2-1 LCD Screen LCD Screen is the most delicate component of the Tablet PC and comprised of thin glass. It may be broken by external abrupt force. DO NOT scratch the cover of the Tablet PC, scratches to the LCD may be permanent and are not covered under warra

• JetPad 100, 8 2-3 Other accessories Follow the below steps before cleaning your Tablet PC and the accessories. 1. Turn off the Tablet PC. Disconnect your Tablet PC and all external devices from their electrical outlets. 2. Moisten a soft, lint-free cloth with water and wipe the surface of the Tablet PC smoothly. DO NOT allow liquid to seep into the Tablet PC in order to avoid shorting circuits and the damaging the Tablet PC. 3. Turn on the Tablet PC after drying it. 2-4 If water seeps into the Tablet PC  DO NOT turn on the Tablet PC im

• JetPad 100, 9 3 Traveling with the Tablet PC Turn off the Tablet PC and disconnect all cables before moving it. Follow the steps below if you want to travel with your Tablet PC. Attention 1. Turn off the Tablet PC and disconnect from wall outlets. 2. Shut down the LCD Screen. 3. Disconnect from AC power. 4. Disconnect all accessories. 5. Place the Tablet PC in a carrying case to protect it from dirt, water, shock and scratches before traveling. 6. Find out the voltage type in the countries you will visit. Your Tablet PC comes with a universal AC-DC adapter, so you only need to buy the different power cords to connect the different

• JetPad 100, 10 4 Getting Started Connecting the Power Adapter The Tablet PC comes with a universal AC-DC adapter and the allowable input voltage of adapter is from 100V to 240V. Following the below steps to connect the adapter: 1. Connect the adapter with the power cord. 2. Plug the DC end of adapter into the power jack of the Tablet PC. 3. Insert the AC end to the wall outlet 4. Check the connections above correctly before turning on the Tablet PC. DO NOT remove the Tablet PC if the HDD is being read or written, this may result in the loss of data and the damage to the disk. Your Tablet PC and the accessories

• JetPad 100, 11 5 Using Your Tablet PC 5-1 Turning on the Tablet PC Press the POWER button to turn on the Tablet PC. 5-2 Notebook Manager Setting 5-2-1 Camera and Wifi setting You can enable/disable the camera, wifi function or manually adjust volume and brightness in Notebook Manager－〉Common. 5-2-2 G-sensor and Light-sensor setting To activate the screen-revolve via G-sensor, click the icon on the panel to select Notebook Manager－〉Advanced, as shown right: ¾ Ticking the frame of the option “Auto Rotate Screen” to activate G-sensor; ¾ Check the “Auto Brightness Adjust” box to activate the light sensor; However, do not check the box if yo

• 12 5-3 System Connection The Notebook includes the mini-VGA port for connecting External Monitor or TV via mini-VGA transfer cable. 5-3-1 Connecting an external VGA monitor Connect one end of mini-VGA transfer cable to the VGA port of the unit, the other end with VGA cable to the VGA port of the device, as shown right: After connecting, switch the external display to be

• JetPad 100, 13 The internal speakers will turn off automatically after connecting external headphones to the Tablet PC. Excessively loud volume could damage your hearing. Lower the volume before connecting earphones, and then raise the volume to comfortable level. 5-4 Keyboard Usage If the onscreen keyboard is not visible, Click Start－〉All Programs －〉Accessories－〉Ease of Access－〉On-Screen Keyboard to activate the virtual keyboard. 5-5 Card Reader Usage The Tablet PC has a single built-in memory card reader that can read the following flash memory car

• JetPad 100, 14 6 Internet Connection 6-1 Connect with the network via Wired LAN Before connecting to the network, ensure your network is set up correctly, then connect your network cable to your Tablet PC. The WINDOWS 7 OS comes with most networking protocols installed automatically, such as TCP/IP. However, you still may have to set the configuration for the specified Network IP and other settings manually. Some applications may need to be run with administrator credentials. 1. Right click Network－〉Properties －〉 Network and Sharing Center: 2. Click Local Connection －〉General－〉Properti

• JetPad 100, 15 6-2 Wireless LAN Your Tablet PC comes with a built-in Wifi wireless card that you can activate/de- activate using the Notebook Manager－〉Common－〉 Wireless LAN Enabled. Left click the icon and it will display the list of currently available networks as shown right: The system will continue to auto search the available networks from which you can select the desired one; Check “Connect automatically” box and click “Connect” so that the system will auto c

• JetPad 100, 16 3. In the menu, you need to input the IP addresses, subnet mask, default gateway, DNS and etc, then click “OK” to finish setting. The system will start connecting to the network. Contact your Internet service provider for more information about the settings for IP and DNS; you also can use the “Internet Protocol Version 6(TCP/IPv6)” with the above steps. 6-3 PPPoE If you need to go online via dial-up setting for PPPoE, please refer to the below: 1. In the window ”Network and Sharing Center”, select Setup a new connection or network －〉Connect to the Internet, as shown

• JetPad 100, 17 3. Click Broadband(PPPOE). 4. Enter your User name and Password and click “Connect” to finish. For connecting a dial-up VPN network, you can refer to the above details. 6-4 3G Wireless Network (Optional) The Tablet PC contains 3G module port, antenna and SIM card plug that you can install a purchased 3G module (sold separately) Install following the steps outlined below. 1. Turn off the Tablet PC, remove the back cover A towards the arrow , unscrew the screws② and remove the back cover B towards the arrow③. 2. Install 3G mo

• JetPad 100, 18 1. As in Picture 1, plug the reserved 3G antenna into the main antenna position on the 3G module. 2. Plug one end of the module into the 3G port of the unit as shown by the arrow and press the module softly toward the unit until it matches the groove as the shown by the arrow (Picture 2.). 3. Tighten the screw as seen in Picture 3. 4. Close the shield cover and lock the screws as shown in step 1. 5. Insert your SIM card into SIM card slot of the unit. 6. Click the “Notebook Manager” icon on the panel

• 19 7 Enter the BIOS Setup Menu Connect an external keyboard to enter the BIOS Setup Menu as following steps: 1. Press F2 key quickly during loading the system, the system will then enter “Setup Utility” as shown below: 2. Press the left/ right direction keys to select “Boot” and press the Enter key to enter the below menu: On the menu, press

• JetPad 100, 20 Press the F9 key to setup defaults and select “Yes” to confirm. 4. There is no need to change the startup order and click F12 directly to select the temporary startup option after turning on the unit. The BIOS version will be updated occasionally. If there is difference from the manual, please be aware, options may be different than presented in the manual. 8 Appendix 8-1 Troubleshooting Q1：How do I turn off the Tablet PC when the system has frozen? A：P

• JetPad 100, 21 Q4：Why can’t the system be recovered? A： 1. Damage to external memory or built-in memory: The data may be corrupted. Send the unit to be repaired by a qualified technician. 2. Incompatible external device: The system may enter the standby mode and cannot resume, an incompatible external device is connected to the Tablet PC. 3. Error from a system or application program: Send the unit to be repaired by a qualified technician. Q5：How do I maximize battery life? A： 1. Adjust the brightness of the LCD Screen to the lowest level. 2. Turn down the volume. 3. Disable Wifi 4. In the Power Management menu, select the “Power Saver” profile. Q7: The pict

• JetPad 100, 22 Storage HDD Capacities (#) 160GB TFT Screen TFT Screen Size 10” Screen Type LED Touch-sensitive Description 1024X600 (WSVGA) Built-in Camera Resolution 1.3M Pixels Video/Audio Feature Video Card Type Intel GMA 3150 Video Card Capacity Share Dynamic EMS Memory 128MB(Max) Audio System Built-in speaqker Sound Card Type HD Codec I/O Device Mouse Touch Pad Condition Operating Temperature 5-35 Operating Humidity 35%-85% Storage Temperature -20-55℃ Storage Humidity 20%-93% Power

• JetPad 100, 23 Adapter AC 100~240V; DC 19V Output Power (maximum) ≤40W Battery (Type) Lithium rechargeable battery Voltage 11.1V Port Standard LAN LAN Type: 10/100Base-T Wireless Card: 802.11 b/g/n Audio Port Headphone Port, Speaker, Built-in Microphone, Microphone Port USB Port USB-A Port(x2)，USB2.0 SD Card Port Support SD/MMC Card VGA Port Mini-VGA 3G module Port(reserved) Support 3G module Physical Features Weight About 1kg Dimension 264*169*18.5mm Design and specifications are subject to change without notice. The # sy

Related Products and Documents (Tablet):

Comparable Devices:

Similar Resources:

• HP TC1100 - Compaq Tablet PC (272 pages) Hardware and Software GuideHP Compaq Tablet PC SeriesDocument Part Number: 367426-002September 2005This guide explains how to identify and use tablet PC hardware features, including connectors for external devices, and provides settings and procedures for managing tablet PC power and security. It also includes power and environmental specifications, which ma …

• Kurio C15102 Motion (8 pages) • The tablet must be set up by an adult to ensure an appropriate level of protection for all users of the device.• To turn off your Kurio tablet correctly, press the Power button until the pop up message appears on screen, and then select ""Power off"". Avoid switching off the device by pressing and holding the Power button until the …

• Vidao V9TAB8S (10 pages) 9” Touchscreen Tablet Quick Start Guide Model: V9TAB8S Important Information If you are experiencing a problem with the operation of this Tablet – Do not return it to the retailer! Your Touchscreen Tablet includes Free Technical Support by Phone or Internet and we are glad to help you with any Problems. For Technical Support by Internet, simply t …

• Fujitsu FMW51BC1 (2 pages) Stylistic LT and PenCentra 130 are trademarks of Fujitsu Personal Systems, Inc. © 1999 Fujitsu Personal Systems, Inc.6/99 58-0664-00A FMW51BC1External Battery Charger User’s GuidePenCentra 130 / Stylistic LT The FMW51BC1 external battery charger allows you to charge up to two battery packs simultaneously. Using the Battery Charger 0To charge y …

• XGODY T702 (19 pages) 1ContentsForeword..........................................................................................1Appearance and Button ................................................................4First Use..........................................................................................6Desktop ......................................................... …

• RealWear HMT-1Z1 (91 pages) RealWear, Inc. Copyright 2019 www.realwear.com Version 1.1.4 – Updated for Release 10.4.0 HMT-1Z1 HMT Release 10 User Guide ® …

Comments, Questions and Opinions: