Manualios.com

ArcVision ARC19020 Operation & User’s Manual

ArcVision ARC19020 Manual Online:

3.65, 1336 votes
ArcVision ARC19020 User Manual
ArcVision ARC19020 User Guide
ArcVision ARC19020 Online Manual

Text of ArcVision ARC19020 User Guide:

  • ArcVision ARC19020, 1 2001/10/03 Version: 1.1 No: 040050 CONTENTS 0. CONTENTS ...................................................................................................................................................................................... 1 1. INTRODUCTION AND FEATURES .......................................................................................................................................... 2 1.1 Product Introduction.....................................................................................................................

  • ArcVision ARC19020, 2 1. INTRODUCTION AND FEATURES 1.1 Product Introduction This surveillance kit can be installed in many different places (such as homes, shops, offices, ... etc.). It is designed with 4 objectives:Economical, Complete Functions, Installs Easily, and User Friendly. 1.2 Product Features  An economic solution for home, shop or building surveillance system.  Plug & Play. Installs easily and is suitable as DIY (Do It by Yourself).  Has Microprocessor, compact dimension, and smar

  • ArcVision ARC19020, 3 2. INSTALLATION 2.1 System Installation Diagram 2.2 Installation Procedures V IDEO IN 4 3 2 1 VIDEO OUT OUT QUAD OUT DC 12V 500mA POWER IN VCR IN MONITOR EIA CCIR COM/NO/NC RELAY OUT Back Panel §Terminal Function Description. Terminal Function Description COM/NO/NC Alarm Triggered Relay Out Terminal This terminal is an auto-switch output (N.O., Normal Open type or N.C., Normal Close type). Whenever alarm is triggered. It can be used to control other equipments. OUT MONITOR Video signal output BNC type Terminal This terminal represents the video signals output for connecting to external Monitor. QUAD OUT Video signal output BNC type Terminal Th

  • ArcVision ARC19020, 4 VCR IN External video signal input BNC type Terminal from the VCR This terminal represents the video signals input for connecting to external VCR. EIA CCIR Video system select switch Both EIA and CCIR system machine, manual switchable. 4 CH4 video signal input BNC type Terminal This terminal represents the video signals input for connecting from external camera. 3 CH3 video signal input BNC type Terminal This terminal represents the video signals input for connecting from external camera. 2 CH2 video signal input BNC type Terminal This terminal represents the video signals input f

  • 5 Step 2: Illustration of the external video Cameras, Monitor and VCR. Please refer to figure as shown below. Monitor Camera 4 VCR Camera 3 Camera 2 Camera 1 VIDEO IN 4 3 2 1 VIDEO OUT OUT QUAD OUT DC 12V 500mA POWER IN VCR IN MONITOR EIA CCIR COM/NO/NC RELAY OUT Master Controller Step 3: You can skip this step if it is not necessary to control other equipment by the

  • ArcVision ARC19020, 6 Illustration of a CCTV/VCR setup. Moreover, this "RELAY OUT" port also can be used to control devices such as security main controller, auto-dialling machine, etc. Step 4: Plug the end of the power adaptor into the "DC IN" socket and plug the other end into the AC power socket as shown below. After that, this whole surveillance system will work perfectly. POWER SOURCE ADAPTER 1 2 C C I R I A D C 1 2 5 0 0 m A P O W E R I N Plug the end of the power adaptor into the "DC IN" socket ADAPTER 1 2 C C I R I A D C 1 2 5 0 0 m A P O W E R I N "External Start Record" connector on the VCR R M O T I O U T N O N / /

  • ArcVision ARC19020, 7 Step 5: To disconnect RELAY OUT terminal wires, Please follow the instructions below: | } { R E L A Y O U T O / N C C O M / N R E L A Y O U T O / N C C O M / N { Use slot (—) type screwdriver and insert it into the orange colored release button at the top of terminal connectors. | And then push upward. } Pull terminal wires out. 3. OPERATING INSTRUCTIONS 3.1 Introduction of the MASTER CONTROL panel QUAD AUTO ENTER PLAY ↑↓ +- ESC 1 2 34 1234 MENU  FREEZ

  • ArcVision ARC19020, 8 Mode Light Normal Mode AUTO Seq. Mode FREEZE PLAYBACK Mode MENU Mode Key AUTO LED light QUAD LED flash PLAY LED light MENU LED light AUTO LED light AUTO LED dark AUTO Enter to AUTO Sequential mode. Disengage from AUTO Sequential mode. 1 LED light AUTO LED dark 1 LED light or dark 1 LED light ↑ 1 CH1 Full display. Disengage from AUTO Sequential mode. Freeze∕Release CH1 image. Freeze∕Release 22 CH1 image. Move cursor up↑ or left ← . 2 LED light AUTO LED dark 2 LED light or dark 2 LED light ↓ 2 CH2 Full

  • ArcVision ARC19020, 9 3.2 OPERATING INSTRUCTIONS 3.2.0 Power On Reset and System Self-Test. After the Power is on for reset, the ‘SYSTEM SELF TEST’ will be shown on the monitor. Figure 1A:EIA system self-test message . Figure 1B:CCIR system self-test message. After the system self testing is done, the ‘OK’ will be shown on the monitor. Figure 2A:Message shown when EIA system Figure 2B:Message shown when CCIR system self-test i

  • 10 3.2.2 SEQUENCE MODE. ● Press the[AUTO]key to enter AUTO SEQUENCE mode, which also turns on the AUTO LED. Processor will automatically be changed to the image, interval time and channels previously set.  Under AUTO SEQUENCE MODE, when no sequence are set, the "NO SEQUENCE SETTING" message will be shown on the monitor.  When

  • 11 System set-up Main menu. Date∕Time display set-up menu. Image quality set-up menu. Channel title set-up menu. Contrast set-up menu. Automatically sequence set-up menu. Motion set-up menu. Picture In Picture display set-up. A

  • ArcVision ARC19020, 12 Figure 5. The DATE formats select rolling mapping. ● DATE range:Year data form 2000 to 2099, Month data from 01 to 12, Day data from 01 to 30. ● TIME format:HH:MM:SS for display, Hour data from 00 to 23, Minute data from 00 to 59, Second data from 00 to 59. ● If MONITOR OUT DATE∕TIME is set “ON”, the DATE/TIME will be shown on the MONITOR OUT display. ● If QUAD OUT DATE∕TIME is set “ON”, the DATE/TIME will be shown on the QUAD OUT display. ● LOCATION:There are six position for DATE∕TIME display. On the LEFT TOP, TOP, RIGHT TOP, RIGHT BOTTOM, BOTTOM and LEFT BOTTOM. Figure 6. DATE∕TIME disp

  • ArcVision ARC19020, 13 ● If MONITOR OUT BORDER LINE is set “ON”, the borderline will be shown on the MONITOR OUT display. ● If QUAD OUT BORDER LINE is set “ON”, the borderline will be shown on the QUAD OUT display. ● BORDER LINE WIDTH - adjustable range is from 0~3. ● BORDER LINE BRIGHT - adjustable range is from 0~255. ● FONT BRIGHT - adjustable range is from 0~255. ● DISPLAY MUTE BRIGHT - adjustable range is from 0~255. ● MONITOR OFFSET vertical X and horizontal Y adjustable range is from 0~15。

  • ArcVision ARC19020, 14  Under PIP mode, the title for channel 2 will change position automatically and be shown on the RIGHT TOP, title for channel 3 will be shown on the LEFT BOTTOM and title for channel 4 shown on the RIGHT BOTTOM!  If the DATE/TIME location was previously set on the LEFT TOP, When under FULL SCREEN DISPLAY, the title will be shown on the LEFT BOTTOM! 3.2.4.5 CONTRAST SETUP. Figure 9 Contrast setup menu. ● VODEO 1 CONTRAST: The camera 1 ( channel 1 ) image contrast adjustable by user. ● VODEO 2 CONTRAST: The camera 2 ( channel 2 ) image contrast adjustable by

  • ArcVision ARC19020, 15 2. When no sequence are set on the AUTO SEQUENCE MODE, It will display“ NO SEQUENCE SETTING"on the monitor, thus alerts the buzzer alarm, the processor will automatically change to NORMAL mode after 5 seconds. 3. When switching intervals are all set to “0”, the“NO SEQUENCE TIME SETTING"message will display on the monitor, thus alerts the buzzer alarm, the processor will automatically change to NORMAL mode after 5 seconds. ● DWELL TIME:Set the interval time corresponding to each sequence position. (Time range: 0~30 seconds.) ● BUZZER ALARM TIME:The buzzer time

  • ArcVision ARC19020, 16 System Motion detection windows X position limit Y position limit Window 1 12~60 14~50 Window 2 80~130 14~50 Window 3 12~60 70~104 EIA Window 4 80~130 70~104 Window 1 8~60 16~64 Window 2 80~130 16~64 Window 3 8~80 84~130 CCIR Window 4 80~130 84~130 Table 1. ※ If the QUAD SCREEN MOTION setting OFF then Channel1~4Motion detection windows position can't setting. ● TIME INTERVAL IN BETWEEN THE TWO MOTIONS:Range 0~15 seconds. ※ 8 second function for “RELAY OUT” activation after mo

  • 17 3.2.4.9 ALARM LIST. This menu is read only! Figure 13 : Alarm list. ● P01~P10:Alarm list page number. ● 01~60:Alarm number. ● CH:Active channel. ● AT:Active Type.  MD:Motion Detect.  VL:Video Loss. ● DATE:Alarm active date. ● TIME:Alarm active time. 3.2.4.10 LOAD DEFAULT. Figure 14

  • ArcVision ARC19020, 18 3. Keep the unit under ventilation. Don’t put anything on the top of this processor. Do not expose it to extreme moisture please turn off the power and send this processor to a repair center. 4. Please do not use any accessories that not supported by us. It is strictly prohibited to insert any other plug into DC IN socket, please use the specified DC12V±5%∕500mA power adapter. Otherwise, it may cause system damage, and result in injury. 5. RELAY OUT, Motion Detection, Video Loss and

  • ArcVision ARC19020, 19 5. SPECIFICATIONS (Note: Design and specifications are subject to change without prior notice.) Video Input Ports 4 Cameras. Picture Refresh Rate EIA:60 Fields∕sec;CCIR:50 Fields∕sec Video Format EIA or CCIR Monochrome video signal. Video Input 4 BNC connectors. 75Ω Loaded. Video Output 2 BNC connectors. VCR IN 1 BNC connectors. 75Ω Loaded. Quad Out QUAD Only video output 1 Vp.p∕75Ω Load. Monitor Out Full screen or Quad output 1 Vp.p∕75Ω Lo

Related Products and Documents (Security System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 United States Stove 1600 Installation & operator's manual united-states-stove/1600-7Z5.pdf 10 Feb 2024 32 0.39 Mb
2 Cambridge Audio S70 Installation manual cambridge-audio/s70-I6W.pdf 24 Apr 2023 12 0.24 Mb
3 Miele DA 428-4 Operating and installation manual miele/da-428-4-HF9.pdf 27 Feb 2024 40
4 Insignia NS-BRDVD Faqs insignia/ns-brdvd-A4H.pdf 13 May 2023 3
5 Kuppersbusch IG 633.1 Instruction book kuppersbusch/ig-633-1-TJG.pdf 25 Oct 2022 7
6 Sony XS-GTR100L Specifications sony/xs-gtr100l-9I6.pdf 13 Nov 2023 1 0.17 Mb

Similar Resources:

  • 21st Century Alarms

    LuxHome LCD

    (7 pages)
    LuxHome LCDWireless AlarmSystemUser GuideAbout Your Alarm System 01 01. Full Arm 01 02. Part Arm 1 0103. Part Arm 2 0204. Disarm 0205. Quick Set 0206. Omit Zone 0207. Panic Alarm 0308. Event Log 0309. Chime 0310. Event Log 0311. Voice Dialer 0412. Latch Key 0413. Remote System Control 04 + 05 …
  • Whelen Engineering Company

    295HFS6 Series

    (10 pages)
    Page 151 Winthrop RoadChester, Connecticut 06412-0684Phone: (860) 526-9504Internet: www.whelen.comSales e-mail: [email protected] Service e-mail: [email protected]/Operating Manual:295HFS6-series Siren©1998 Whelen Engineering Company Inc.Form No.13084C (121301)Automotive: Sirens/Switches®ENGINEERING COMPANY INC.For warranty informat …
  • Crime Guard

    Crime Guard 650i5

    (2 pages)
    650i5Two Transmitters included:1 green (glow) button and 1 gray button.(the 650i5 is capable of being upgraded with the 2-way Echo)Operations: Lock Button - Press and release to Arm/Lock. Pressand hold to activate Remote Panic with locking doors.Unlock Button - Press and release to Disarm/Unlock. Press and holdto activate Remote Panic with unlocking the door …
  • GeoVision

    GV-3D

    (43 pages)
    Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.User’s Manual V1.00GV-3D People Counter V23DPC2V10-A …
  • Bosch

    B926F

    (3 pages)
    Intrusion Alarm Systems | B926F Fire keypad, SDI2B926F Fire keypad, SDI2 www.boschsecurity.com u Fire keypad with fire function keys: ACK, SILENCE,RESET, and DRILLu 2-line LCD display with up to 32 character point,user, and area namesu Simple menu-style user interface with dedicatedfunction buttons for common commands, includingstatus indication …
  • DSC

    PC5020 Power864

    (68 pages)
    Power 864SECURITY SYSTEM®TMInstallation ManualIMPORTANTThis manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read.PC5O2O/PC5O2OCF Version 3.2DLS-3 v1.3 and higherNow classified in accordance with ANSI/SIA CP-01-2000 (SIA …

Comments, Questions and Opinions: