Manualios.com

Astrodesign WM-3004HD Instruction Manual

Astrodesign WM-3004HD Manual Online:

4, 1240 votes
Astrodesign WM-3004HD User Manual
Astrodesign WM-3004HD User Guide
Astrodesign WM-3004HD Online Manual

Text of Astrodesign WM-3004HD User Guide:

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 40 3.3.5.3 Color setting screen <<Functions>> When the OVERLAY switch is held down in the VECTOR mode, the following settings can be performed. $ Character color $ Scale color $ Vector color and brightness $ Cursor color <<Screen>> [Description of operations] Switch Description of function FUNC switch Press this to return the display to the previous screen. F1 switch

  • WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 11 *1: Power socket (no. <1>) Pin No. Function 1 GND 2 NC 3 NC 4 DC IN (10-18V) *2: TALLY connector (no. <9>) Pin No. Function 1 GND 2 TALLY2 (green) 3 NC (reserved) (Note) 4 NC (reserved) (Note) 5 NC (reserved) (Note) 6 GND 7 TALLY1 (red) 8 NC (reserved) (Note) 9 GND When GND a

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 6 Concerning installation and operation locations ! Installing the monitor in the following kinds of locations may cause malfunctioning and/or accidents. 1) Locations with an ambient temperature outside the range of 0 -40 degrees Celsius (see Note 1) 2) Locations with an ambient humidity outside the range of 30-80% RH 3) Locations in the vicinity of an air conditioner or subject to rapid temperature changes or the formation of condensation 4) Locations exposed to direct sunlight (see Note 2) 5) Locations exposed to corrosive gase

  • WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 37 3.3.5 VECTOR mode 3.3.5.1 Normal screen <<Functions>> The signals on the vectorscope can be displayed, and the following settings can be performed. $ Increase of black, white levels $ Line selection function <<Screen>> YCRCE:000000000 PCRCE:000000000 (LAST:00:00:00/TIME:00

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 15 Item Description Display modes G This indicates whether the input video green (G) signal is to be displayed. P1・P2 B This indicates whether the input video blue (B) signal is to be displayed. P1・P2 R This indicates whether the input video red (R) signal is to be displayed. P1・P2 (Marker) This indicates a list of the usable markers. The currently selected marker is highlighted. P1・P2 Y-Gamma This indicates the Y gamma setting. P1・P2 Bright This indicates the brightness setting. P1

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 31 [Description of operations] Switch Description of function FUNC switch Press this to return the display to the function screen. (Refer to section 3.3.4.1) F1 switch 1H 1H F2 switch 2H 2H (with interlacing or segmented frame format) In the line select OFF status, the odd-numbered fields are displayed on the left side, and the even-numbered fields are displayed on the right side. In the line select ON status, the selected line is displayed on the left side, and the next line in the selected field is displayed on the right side. F3 switch 1F

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 7 CHAPTER 1 CONCERNING THE WM-3004 The WM-3004 is a compact, lightweight and portable LCD waveform monitor which comes in handy for monitoring the pictures being shot during live broadcasts, on location or in studios, etc. The camera battery is supported as the power supply so that pictures, waveforms and sound can be checked even in locations where difficulties have been encountered in the past in carrying in equipment. A full range of functions is provided including fun

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 44 3.3.7.2 Color setting screen <<Functions>> When the OVERLAY switch is held down in the AUDIO mode, the following settings can be performed. $ Character color $ Scale color $ Status color <<Screen>> [Description of operations] Switch Description of function FUNC switch Press this to return the display to the normal screen. (Refer to section 3.3.7.1) F1 switch Information Press this to select the color (any of 63

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 41 3.3.6 STATUS mode 3.3.6.1 Normal screen <<Functions>> The statuses can be displayed, and the following settings can be performed. $ Status (numerical value) display $ EAV, SAV display <<Screen>> [Description of operations] Switch Description of function FUNC switch (Not used) Adjustment dial Use the dial to increment or decrement the lines or samples in the status displayed. Setting switch Press this to select the field (with interlacing or segmented frame format). F1 switch EAV Press this to jump to EAV. F2 switch SAV Press

  • WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 26 3.3.3 PICTURE3 mode 3.3.3.1 Regular screen <<Functions>> The input pictures are displayed, and all displays with the exception of NoSignal , the time code (VITC), Freeze and the markers are cleared. Apart from displaying the time code (VITC), the functions in the PICTURE3 mode ar

  • WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 38 [Description of operations] Switch Description of function FUNC switch This switches the display to the VECTOR mode setting screen. (Refer to section 3.3.5.2) When the gain setting is fixed Fix x1 (Not used) When the gain setting can be varied Val x*.** Use the dial to

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 39 3.3.5.2 VECTOR mode setting screen <<Functions>> The signals on the vectorscope can be displayed, and the following settings can be performed. $ V ancillary (Vect) switching $ Scale switching $ LPF (Vect) switching <<Screen>> [Description of operations] Switch Description of function FUNC switch This switches the display to the normal screen. (Refer to section 3.3.5.1) Adjustment dial (Not used) Setting switch (Not used) F1 switch (Not used) F2 switch V anc(Vect) ON/O

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 17 3.3.1 PICTURE1 mode 3.3.1.1 Picture adjustments 1 screen <<Functions>> The input images can be displayed, and the following video adjustments can be undertaken. $ Brightness $ Contrast $ Chroma $ Pb (Cb) $ Pr (Cr) <<Screen>>

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 45 3.3.8 MENU mode 3.3.8.1 Normal screen <<Functions>> The menu screens can be displayed, and the following settings can be performed. $ Format selection $ Reference setting $ Icon animation setting $ Error count resetting $ Initializing <<Screen>> YCRCE:000000000 PCRCE:000000000 (LAST:00:00:00/TIME:00:00:00) Input SDI A Format AUTO (1080i 60.00) Int Format SDI A Reference Channel Initialize AUTO 1080i/60(30sF) 1080p/30 10

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 2 CONTENTS INTRODUCTION ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3 SAFETY PRECAUTIONS ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 CHAPTER 1 CONCERNING THE WM-3004 ・・・・・・・・・・・・・・・・・・・・・・・・・・・

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 27 3.3.3.2 Color setting screen <<Functions>> When the OVERLAY switch is held down in the PICTURE3 mode, the input pictures can be displayed, and the following settings can be performed. $#Character color $#Marker color <<screen>> [Description of operations] Switch Description of function FUNC switch Press this to return the display to the normal screen. (Refer to section 3.3.3.1) F1 switch Information Press this to select the color (any of 63 col

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 19 [Description of operations] Switch Description of function FUNC switch This switches the display to the picture adjustment 2 screen. (Refer to section 3.3.1.2) F1 switch Bright Press this to adjust the brightness using the adjustment dial. Refer to section 4.5. (Variable range: -50.00% to +50.00%) F2 switch Contrast Press this to adjust the contrast using the adjustment dial. (Variable range: 0.0%-200.0%) When the setting

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 50 4.2 Input signal systems SDI input specification Specification HDTV BTA S-004B and SMPTE 292M standards complied with, NRZI SDI signal SDI input Field (frame) frequency, 60.00/59.94 [Hz], etc. automatically scanned Automatic scanning of input format enabled Analog input specification Specification BTA S-001B, SMPTE 274M and SMPTE 296M standards complied with Field frequency, 60.00/59.94 [Hz], etc. automatically scanned Automatic scanning of

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 30 3.3.4.3 SWEEP setting screen <<Functions>> The waveforms can be displayed, and the following settings can be performed. $#1H, 2H, 1F or 2F display switching $#Line select function (with 1H or 2H) <<Screen>> WAVEFORM MONITO R HD LCD WM-3004 INPUT F1 DISPLAY F2 OVERLAY F3 FREEZE F4 FUNC F5 LOCK OFF ON POWER | ! PICTURE MENU STATUS 2 1 3 1 2 WAVE V ECTO R AUDIO YCRCE:000000000 PCRCE:000000000 (LAST:00:00:00/TIME:00:00:00) 1H

  • WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 20 3.3.1.2 Picture adjustments 2 screen <<Functions>> The input images can be displayed, and the following video adjustment can be undertaken. $ Y gamma <<Screen>> [Description of operations] Switch Description of fu

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 16 [Description of operations] Switch Description of function INPUT switch This switch is used to select the SDI A or SDI B input signals. When it is held down (for more than one second), analog signals are input. If the freeze status is established at this time, it is released. DISPLAY switch This switch is used to set whether the information is to be partially displayed on the screen or not displayed at all. When it is held down (for more than one second), the top and

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 48 3.3.9 HELP mode <<Functions>> The hierarchical levels of the modes and operation methods are displayed together. [Description of operations] Switch Description of function FUNC switch (Not used) Adjustment dial Used to scroll the pages. Setting switch (Not used) F1 switch (Not used) F2 switch (Not used) F3 switch (Not used) F4 switch (Not used) F5 switch (Not used) 3.4 Installing and securing the monitor Provided at the top and bottom of the monitor are 1/4-20UNC threaded holes. Fit screws into these holes to anchor the m

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 46 [Description of operations] Switch Description of function FUNC switch (Not used) Adjustment dial Use the dial to select the items to be set. Setting switch Press this to select the format, set the reference or initialize the setting of the currently selected channel (reset to the CRC error count). Refer to section 4.6. If the freeze status is established when the format is selected, it is released. F1 switc

  • Astrodesign WM-3004HD, WM-3004-HD HD LCD WAVEFORM MONITOR INSTRUCTION MANUAL 29 3.3.4.2 DISPLAY setting screen <<Functions>> The waveforms can be displayed, and the following settings can be performed. $#Switching between parade display (side-by-side display) and overlay display (superimposed display) for the waveforms $#Line select function (with 1H, 2H) <<Screen>> [Description of operations] Switch Description of function FUNC switch Press this to return the display to the func

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 TRENDnet TEW-648UB - 150Mbps Mini Wireless N USB 2.0 Adapter Quick installation manual trendnet/tew-648ub-150mbps-mini-wireless-n-usb-2-0-adapter-8DZ.pdf 14 Nov 2022 21 3.76 Mb
2 Grizzly G0550 Parts list grizzly/g0550-61J.pdf 07 Dec 2023 6 1.18 Mb
3 LevelOne FCS-5030 Specification sheet levelone/fcs-5030-C4V.pdf 20 Sep 2023 3
4 Black & Decker TRO651W Use and care book manual black-decker/tro651w-4FZ.pdf 16 Jul 2022 7 1.53 Mb
5 AOC LM914 Operation & user’s manual envision/lm914-2B1.pdf 28 Nov 2023 28 0.5 Mb
6 KitchenAid KHTU705RSS1 Installation instructions and use & care manual kitchenaid/khtu705rss1-68C.pdf 16 Jun 2023 28

Similar Resources:

  • ViewSonic

    VX2435wm

    (23 pages)
    - User Guide- Guide de l’utilisateur- Bedienungsanleitung- Guía del usuario- Guida dell’utente- Guia do usuário- Användarhandbok- Käyttöopas- Podręcznikużytkownika- Használatiútmutató- Pyководствопользователя- Uživatelskápíruka- Kullanιcιkιlavuzu- Gebruikshandleiding- Οδηγ …
  • ViewSonic

    E70M - 17" CRT Display

    (2 pages)
    Reliable ValueMultimedia versatility, affordable quality.The ViewSonic E70m and E70mB 17" (16.0" viewable) CRT monitors combinePROFESSIONAL QUALITY AND RELIABILITY in an affordable multimediapackage. Easy-on-the-eyes 1024x768 optimum resolution and 0.23mmhorizontal dot pitch deliver bright, crisp, precise images. Adjust your screen withthe OnView® …
  • Siemens

    19T2

    (48 pages)
    CHASSISSERVICE MANUALSPECIFICATIONS19T2F99AEP ModelChassis No. SCC-L30T-ACOLOR MONITORDimensions and weightCRT: 46 cm (19")Visible diagonals: 46 cmDot pitch: 0.24 - 0.25 mm (slot mask)Maximal resolution: 1600 x 1200 pixelsPreset display area: 352 mm x 264 mmDimensions (W x H x D): 449 mm x 463 mm x 463 mmWeight: 26 kgAccessories: Power cable (1.8 m)Sto …
  • Planar

    Q2

    (1 pages)
    *** Product Notice *** Congratulations on your purchase of the Planar Dome Q2 grayscale display system. Note that the AX1 graphics controller (ATI FireGL V3200) included with this system is designed for use in PCs equipped with the new PCI Express bus. This new bus architecture offers high-speed data transfers and performance beyond what was available wit …
  • Acer

    P223W

    (26 pages)
    LCD Monitor Quick Setup GuideP223WEnglishSafety InstructionsObserve the folowing safety guidelines when connection and using your monitor:· Be sure that your monitor is electrically rated to operate with the AC power available inyour location.· Locate your monitor near an easily accessible electrical outlet.· Place the monitor on a solid surface and treat …
  • Rinstrum

    D841

    (17 pages)
    D841/D850 Installation Manual 008D-600-150 Page 1 Table of Contents 1. SPECIFICATIONS ...................................................................................................... 2 2. INSTALLATION .......................................................................................................... 4 2.1. Introduction ..................... …

Comments, Questions and Opinions: