Asuka ARA-HD2 Operation & User’s Manual

Text of Asuka ARA-HD2 User Guide:

• Asuka ARA-HD2, 3 Table of Contents I. Home Menu ................................................................................... 11 II. Quick Guide for First-time User ........................................................ 12 II.1. DVB-T TV Watching ................................................................ 12 II.2. DVB-T Radio Listening ............................................................ 14 II.3. Record Function ...................................................................... 15 II.4. Movie Watching .....................................

• Asuka ARA-HD2, 7 Once a suitable position is found, carefully route the antenna cables to the receiver unit and then connect to the Antenna Inputs on the DTV receiver. Antenna Installation For a better reception, please (1) Place the rod antenna horizontally and, (2) Keep the rod antenna away from metals. Please refer to the diagram below for our recommendations and cable route.

• Asuka ARA-HD2, 12 II. Quick Guide for First-time User II.1. DVB-T TV Watching Step 1: Turn on the device 1. Turn on the vehicle’s ACC or IGN. (or start the vehicle) 2. When the device has power, the POWER LED indicator will illuminate RED. 3. Press the POWER button to turn the device on. Operating LED on the device will illuminate Green when system is ON. NOTE: If the Operating LED does not turn on, please check if the battery is inserted properly in the remote control or battery has sufficient power.

• Asuka ARA-HD2, 4 Front Side (1) AV I/O port: Combination of power input, ACC input, IR , URAT, CVBS, Video/Audio GND and RGB output. (2) Operating: the “Operating” LED indicates if the system is working. (3) Power: the “Power” LED indicates if the 12V or 24V power supply has been successfully applied to the device. (4) USB port: Plug the USB memory stick and HDD to USB port for multimedia playback and TV recording. Unit Description & Installation Guide (3) Power (2) Operating (4) USB (1) AV I/O port

• Asuka ARA-HD2, 25 III.1.7 Subtitle To activate or deactivate the subtitle function. 1. Browse the TV menu screen using [CH]/[CH] buttons to highlight the “Subtitle” option. Press [OK] button to enter the “Subtitle” menu. NOTE: you can also press [RED] button to enter “Subtitle” while enjoying DVB-T TV/Radio. 2. Use [VOL]/[VOL] buttons to select stereo/left/right audio channel. Scroll the available language using [CH▲]/[CH▼] buttons. Press [OK] button to activate the subtitle. 3. Press [EXIT]/[

• Asuka ARA-HD2, 17 II.4. Movie Watching This section below will explain how to quickly play a video file stored on USB device. 1. After selecting movie playback mode on the home screen, file browser screen will appear. Press [OK] button to select the root folder. 2. The available video files will appear on screen. Use [CH] and [CH] buttons to scroll up and down through files, and then select the desired file by pressing [OK] button. The video file will instantly start playing. NOTE: Users can only choose video files under this mode. System will not sup

• Asuka ARA-HD2, 14 II.2. DVB-T Radio Listening 1. Press [CH]/[ CH]buttons to select the Ratio item and then press [OK] button to enter the radio mode. 2. Press [CH]/[CH]buttons to select your preferred radio channel. 3. The radio service will start instantly.

• Asuka ARA-HD2, 22 5. While in program schedule list, press [OK] button to see more information of the selected program. 6. Press [EXIT]/[MENU] button to return “Channel List” screen. c. Brief 1. Press [EXIT]/[MENU] to return to “Schedule” screen. III.1.2 Channel Management To rearrange and to edit the TV channel list by skip, move, and delete functions. 1. Select “Channel Management” in the TV Menu and press [OK] button. The management screen will appear as on the picture on the right. 2. Press [CH]/[CH] buttons to scroll up/down

• Asuka ARA-HD2, 24 III.1.5 Channel Information Provide the information of current service’s system parameters and signal information. 1. Browse the TV menu screen using [CH]/[CH] buttons to highlight the channel information option. NOTE: you can also press [INFO] button to enter “Channel Information” while enjoying DVB-T TV/Radio. 2. Press [OK] button to display the channel information. 3. Press [EXIT]/[MENU] button to exit. III.1.6 Aspect Ratio To adjust image aspect ratio into full-screen, letter-box, and none 1. Browse TV menu us

• 28 III.2.3 Monitor Port Setting To set up the video output format through monitor port 1. Press [CH]/[CH] buttons to highlight the item you want to adjust. 2. Press [VOL] button and use [CH]/[CH] to scroll up and down the options. 3. Select one by pressing the [OK] button or exit the setting by pressing the [EXIT]/[MENU] button. 4.

• Asuka ARA-HD2, 31 III.5. Movie Menus On entering Movie service, user can manipulate aspect ratio, sound effect, set up the equalizer, the play mode, change audio, and subtitle. III.5.1 Menu 1. Press [MENU] to enter “Menu”. 2. Press [CH]/[CH] buttons to highlight the item you want to adjust. 3. Press [VOL] button and use [CH]/[CH] to scroll up and down the options. 4. Select one by pressing the [OK] button or exit the setting by pressing the [EXIT]/[MENU] button. 5. After adjusting, pres

• 33 plastic insulator to avoid discharge of battery power. Check that the plastic insulator has been removed. No “line-of-sight” between unit and controller Ensure there are no obstacle between the controller and the unit.

• 1 Please read all of these instructions regarding your unit and retain them for future reference.  Read this manual fully and carefully before operating this in-car DVB-T receiver.  Keep this manual handy as a reference for operating procedures and safety information.  Pay close attention to all warnings in this manual and follow the

• Asuka ARA-HD2, 26 found, user has to manually perform channel search procedures either via DVB-T menu option “Auto Search”. 3. Auto: when signal is weak, after certain seconds AFS period time, for the continuous reception of current TV program the unit will first search a new available frequency from existing database. If none was found, unit will automatically perform channel search procedures after user-defined tuning period time. 1. Browse TV menu using [CH]/[CH] button and press [OK] button to enter “AFS Setting” 2. Press [VOL] button and u

• Asuka ARA-HD2, 18 II.5. Music Listening The section below will explain how to quickly play a music file stored on USB device. 1. After selecting music playback mode on the home screen, file browser screen will appear. Press [OK] button to select the root folder. 2. The available audio files will appear on screen. Use [CH] and [CH] buttons to scroll up and down through files, and then select the desired file by pressing the [OK] button. The audio file will instantly start playing. NOTE: users can only choose music files under this mode. Vid

• Asuka ARA-HD2, 29 III.2.6 Reset Default To reset all settings to factory default. 1. Press [CH]/[CH] buttons to highlight “Reset Default” option and press [OK] to enter. 2. Press [OK] to reset system’s settings to factory default. 3. Press [EXIT] to exit.

• Asuka ARA-HD2, 11 I. Home Menu This is the home menu screen. You can highlight the DVB-T TV mode, the DVB-T Radio mode, the video playback mode, the music playback mode, the picture viewing mode, and the system settings. Use [CH] and [CH] buttons to highlight the desired item and press [OK] button to select it. DVB-T TV Mode To enter DVB-T TV mode. DVB-T Radio Mode To listen to DVB-T radio broadcasting. Movie Playback Mode To enter movie playback mode and watch movie files. Music Playback Mode To

• Asuka ARA-HD2, 32 IV. Trouble Shooting Q&A Most of the troubleshooting issues can be easily resolved. The most common cases and their respective solutions are listed in the table below. If the problem persists, please contact the after sales service. Problem Possible Reason Solution No picture, no audio. The power cord is not properly inserted into the unit. Check the power wire connection. The unit is not switched on. Press [POWER] button. Unit is in stand-by mode. Press [POWER] button. In DVB-T mode, the number of DVB-T channels is not as much as we expected. The

• Asuka ARA-HD2, 27 III.2. System Settings This is the menu screen of system settings. Users can adjust the country/language setting, picture quality, monitor port setting, antenna power output, reset default, and proceed to a software upgrade. Use [CH] and [CH] buttons to highlight the desired item and press [OK] button to select one. III.2.1 Country/Language To set up the OSD language and DVB-T regional settings. 1. Press [CH]/[CH] buttons to highlight the item you want to adjust. 2. Press [VOL]

• Asuka ARA-HD2, 34 V. Specification Features DVB-T Reception Best in class performance of DVB-T TV reception (Diversity-2) Multimedia playback MP3, MPEG4, JPEG multimedia playback through USB device Advanced functions Support Pay TV, TV-recording , and AFS function RF Input Antenna Active antenna supported (F-Connector or Fakra type) Frequency range VHF (170-230 MHz) and UHF band (470-862 MHz) RF input impedance 75 Ohm Channel bandwidth 6/7/8 MHz TV System Transmission standard ETS 300 744 DVB-T com

Related Products and Documents (TV Tuner):

Comparable Devices:

Similar Resources:

• Contemporary Research 232-MTA (18 pages) 17630 Davenport Road, Suite 113 • Dallas, TX 75252 Phone: 972-931-2728 • Toll-Free: 888-972-2728 • Fax: 972-931-2765 E-Mail: [email protected] • Website: www.crwww.com Product Manual 232-MTA Stereo TV Tuner Ver. 4.4 June 27, 2007 …

• Amino 140 (3 pages) Amino 140 Reflash Image Procedure from a USB Stick A software image from a USB storage device can be installed onto the Amino 140 STB. This feature is available on Ax4x STBs with an installed recovery image of version 2.8.1 or higher. After reflasing the Amino you will need to re-install the Proxy License and setup the Home Page and Proxy profiles. 1. Inser …

• LG DTT900 (16 pages) Installation and Operating Guide | Warranty Model Number | DTT900 | Digital TV Tuner Converter BoxFor service/support Call:Toll Free Number1-877-9-ZENITH(http://www.zenithservice.com)© Copyright 2007, LG Electronics U.S.A., Inc.As an ENERGY STAR®Partner, LGhas determined that this productor product models meet theENERGY STAR®guidelines forenergy efficien …

• TerraTec H5 (2 pages) H5 TV ON YOUR COMPUTER USB universal receiver for digital and analogue TV & radio TerraTec H5 16.09.2010 – Subject to change without notice Pictures might vary. © TerraTec Electronic GmbH All company names and trademarks are registered TerraTec H5 • USB stick for DVB-T, DVB-C, analogue TV & radio • Analogue inputs for digita …

• TerraTec CINERGY T USB XS (2 pages) TerraTec Cinergy T USB XS – 10/2005 – Page 1 / 2 – Subject to change without notice. All company names and trademarks are registered trademarks and brand names of their respective owners. © TerraTec Electronic GmbH The world's most mobile TV card The Cinergy T USB XS receives digital TV signals, yet is no larger than a USB memory stick! …

• Parasound TDQ-150 (6 pages) -1-R/EQ-150 Owner's ManualR/EQ-150 Room EqualizerCongratulations on your purchase of this precision audio component and thank you for choosingParasound. We are sure that you will find the R/EQ-150 to be a very useful problem solving tool. Evenif you have used an equalizer before, please take time to review this manual to take complete advantageof the …

Comments, Questions and Opinions: