Alert 750R-LCD Owner's Manual

Text of Alert 750R-LCD User Guide:

• Alert 750R-LCD, 2 3 TABLE OF CONTENTS A. TRANSMITTER OPERATION ...................................................................................................... 5 B. 2-WAY LCD REMOTE CONTROL TRANSCEIVER OPERATION ........................................................ 5 C. LED DISPLAY ........................................................................................................................... 6 D. CHIRP INDICATOR .................................................................................................................... 6 E. PARKING LIGHT .....................................................................................................................

• Alert 750R-LCD, 4 5 REMOTE START OPERATION A. TO REMOTE START THE VEHICLE ........................................................................................... 11 B. ENGINE START MEMORIZING FOR THE VEHICLE WITH STANDARD ...................................... 12 C. TO OPERATE THE VEHICLE WHILE RUNNING ON THE REMOTE START ................................... 13 D. TEMPORARY STOP FEATURE ................................................................................................. 14 E. TURBO TIMER MODE .....

• Alert 750R-LCD, 6 7 F – F – (C) System’s Status Check Press within 3 seconds F – (·) Monitor Indoor Temperature Press within 3 seconds F –✱ (æ) Daily Timer Start Press within 3 seconds F (1 second) LCD screen lamp turns on for 5 seconds Press and hold for 1 seconds F – F – F Clear the Flashing Icon and Melody Sound on the LCD Screen Transmitter Press within 3 seconds C. LED INDICATORS LED Status LED Status O Disarmed Zone 1 / Warn-Away Trigger Slow ash Armed 2 ashes... pause Zone 2 / Trigger on Trunk/Hood Flash Passive Starter Disable 3 ashes... pause Zone 3 / T

• Alert 750R-LCD, 8 9 The noiseless feature is programmed to activate for one arming cycle only. The security system will return to normal operation during the next arming cycle. PASSIVE STARTER DISABLES: This security system is equipped with an optional Passive Starter disable feature, the purpose of the feature is to protect the vehicle from being stolen at all times, regardless of whether or not the alarm is armed. The starter of the vehicle will be disable 60 seconds after the ignition is turned o. Once the key is turned o, the LED will ash fast for 60 se

• Alert 750R-LCD, 10 11 OVERRIDE THE ALARM WITH PASSWORD PIN CODE: If the valet switch easily found, and defeated, this security system allows the consumer to program a password pin code. Oering a higher level of security. 1. Enter the vehicle and turn the ignition switch to ‘ON’ position. (Alarm will sound.) 2. Within 5 seconds, enter your chosen the rst digit code by pressing and releasing the Valet Switch. 3. (When nished above procedures, system’s siren stop alarming, parking light stop ashing, but the vehicle canno

• Alert 750R-LCD, 12 13 3. To stop the alarm, press and hold the or button on the transmitter again for 3 seconds. Also if any transmitter button other than or button is pressed and released, the panic mode will be turned o immediately. 4. If the button is not pressed, the alarm will automatically stop after 30 seconds. N. TRIGGER THE SYSTEM When armed, your vehicle is protected as follows: 1. Light impact will trigger the warn-away signal. 2. Heavy impacts / Doors open / Hood open / Trunk open / Turn on the ignition key will trigger the programmed sequence. The starter disable relay (if installed) prevents the vehicle’s starter from cranking. The siren, horn, pa

• Alert 750R-LCD, 14 15 OVERRIDE THE SYSTEM TO TURN OFF ANTI CAR- JACKING: Turn the ignition switch from OFF to ON, and within 10 seconds push valet switch, the siren will stop and the system disarmed Note: If you use password pin code to double protect the vehicle security, you will need to use it to completely disarm the system. P. SYSTEM’S TRIGGER CHECK (For two-way transceiver operation only) Press the transceiver F button rst, within 3 seconds press (C) button. It responds with one melody sound and all trigger’s records will immedi - ately displayed on the LCD screen. Note: If it has no responds then you are out of range. Q. SYSTEM’S STATUS CHECK (For two-way transcei

• Alert 750R-LCD, 16 17 REMOTE START OPERATION A. TO REMOTE START THE VEHICLE: When you want to start your vehicle, 1. Press ✱ button twice on the transmitter 2. The parking light will activate to indicate the remote start received the signal. (A melody sounding from your Remote LCD transceiver and “ ” icon will ashes on the LCD screen to conrm the remote start was activated.) 3. The engine will start approximately 5 seconds. 4. Once the engine is running, after couple seconds the parking light will turn on again and cli - mat

• 18 19 periods of time, but would like to leave the motor running and the climate control on. 1. Before turning o the engine, press the ✱ button twice on the transmitter and the LED indicator will ash 3 times to conrm enter. 2. Turn the ignition key to OFF position. (The engine will stay running.) 3. The engine will run until the pre-programmed time elapsed or shutdown inp

• 20 21 G. TEMPERATURE CHECK You can monitor through the LCD screen, the present indoor temperature of the passenger compartment before cooling or heating your vehicle. Press the transceiver F button rst, within 3 seconds press the (·) button; the in-door temperature will be shown on the LCD screen. This reading may be higher than actual ambient temperature due to t

• Alert 750R-LCD, 22 23 ARM Armed Mode Your vehicle is in armed mode Valet Mode All the function shall be temporar - ily on hold Remote Transmission You are transmitting the signal to control unit In - Range Indicator Your are within the remote control range. Door Open Warning Doors are illegally opened (Zone 3) Trunk/Hood Trigger Trunk or Hood is illegally opened (Zone 2) Shock Sensor Trigger Trigger on Shock Sensor (Zone 4) Warn Away Trigger Trigger on Shock Sensor (Zone 1) Engine Starting Your vehicle wngine starting by remote control Engine Running Your vehicle's engine is running ¿ Timer Control Start Engine will start auto

• Alert 750R-LCD, 24 25 2. Press the button again showing next order time on the screen ( ie.0:20), press it again (ie.0:30)…..and so on. 3. Leave the buttons starting count down then icon ashes Note: 1. The count down period is xed as 10 minutes, 20 minutes, 30 minutes, 1 hour, 1.5 hours and 2 hours maximum. 2. When count down timer showing 0:00 means to turn o the timer. 3. Press F button for real time indication when the timer is counting down. 7. Out Of Range Indication: If this feature is selected, the security system wi

• Alert 750R-LCD, 26 27 program mode. 3. Count Down Timer (Parking) Setting: Example Set count down timer at 2:30 1. Press & hold the F button for 3 seconds, with two-melody sound and the “Hours” digit ashes for adjusting. 2. Press the F button 5 times, the LCD screen will shows icon and “Hours” digit is ashes for adjusting. 3. Press the ✱ or button to decrease or increase the “Hour” digit until 2:xx 4. Press the F button once again then the “Minutes” digit ashes for adjusting. 5. Press the ✱ or button to decrease or increase the “Minute” digit until 2:30 6. Press the F button on

Related Products and Documents (Car Alarm):

Comparable Devices:

Similar Resources:

• Webasto Thermo Top E (24 pages) WARNING!Hazard warning:Incorrect installation or repair of Webasto heating systems may cause a fire or result in the emission of carbon monoxide, which can be fatal. Serious or fatal injuries can be caused as a result.Specialist company training, technical documentation, specialized tools and equipment are required to install and repair Webasto heating and c …

• Code Alarm SRT 6700 (14 pages) 1IMPORTANT NOTE: The operation of the Security and Convenience System as described in thismanual is applicable to most vehicles. However, due to the configuration of some vehicles, somefunctions AND/OR SAFETY PRECAUTIONS may not apply. Please see your installing dealer for moreinformation.Owner's ManualSRT 6700Remote Vehicle Control SystemDeluxe Vehicl …

• Audiovox AA-925 (8 pages) 128-6711 1 of 8Model AA-925Installation ManualKeyless Entry SystemWith Two Auxiliary OutputsInstallation InstructionsThis Unit Is Intended For Installation In Vehicles With12 Volt Negative Ground Electrical Systems Only.Kit Contents: (1) Control Module (2) - Three Button Transmitters 4 Channel Code Learning Receiver On Board Antenna (1) - Mu …

• Mongoose M30 (14 pages) Model: M30 Owner’s Operation Manual For correct operation, please read this manual to familiarise yourself with the features. Includes wiring diagram We recommend professional installation of this security product. Imported and distributed by Mongoose (Australia) PTY Limited …

• Ford Vehicle Security and Remote Start Systems (36 pages) Owner's ManualManual del propietarioGuide de l’utilisateurVehicle Security and Remote Start SystemsRemote Start System with Deluxe Vehicle SecurityTMFeaturing PowerCode Technology For the Ultimate in Comfort, Convenience and SecuritySystème de démarrage à distance avec antivol de voiture de luxeTM101825-89/02Sistema de encendido por control remo …

• jablotron Athos CA-1802 (4 pages) CA-1803BT, CA-1802 User manual – Mode 2 - 1 - MHF57000 The "Athos" CA-1802 and CA-1803BT car alarms MODE 2 Thank you very much for buying our CA-1802/CA-1803BT car alarm. Now you will always be able to find where you left your car. Jablotron s.r.o. Controlling the car alarm  The alarm will be armed when the car is locked remot …

Comments, Questions and Opinions: