Manualios.com

Allnet ALL2298 Operation & User’s Manual

Allnet ALL2298 Manual Online:

4.1, 2133 votes
Allnet ALL2298 User Manual
Allnet ALL2298 User Guide
Allnet ALL2298 Online Manual

Text of Allnet ALL2298 User Guide:

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 51 NOTE: Make sure the upgrade software file is available before carrying out software upgrade. The procedure of software upgrade is like the following: Step 1: Click “Browse” and select the binary file to be uploaded, ex. userland.jffs2.

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 71 Mask Setting  Activate/Disable Privacy Mask Function The Privacy Mask function can be activated or disabled. Press the button “Set” to save the setting.  Activate/Disable Transparency Mask The Privacy Mask can be set as transparency if necessary.  Color Setting Select a desired color from the “Color” drop-down list for the specified Privacy Mask. Press the button “Set” to save the Privacy Mask’s color properties.  Mask Number Specify t

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 69 4.5.6 Tilt Angle Settings The network Speed Dome Camera’s tilt angle is adjustable from minimum -10° to maximum 190°. Please enter the desired min. and max. tilt angle into the corresponding fields respectively. Press the “Set” button to save the tilt angle settings.

  • High Speed Dome Camera Version 1.0 20 NOTE: Please note that the function buttons will vary depending on the camera model. There are five tabs: Home, System, Streaming, PTZ and Logout on the top panel. Home Users can monitor live video of the targeted area. System setting The Administrator can set host name, sys

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 67 corresponding fields. When finishing the sequential Preset Points setting, please click the button “Save” in the top of the Sequence setting menu. Sequence Run Select the specified Sequence Line from the drop-down list, press the “Go” button, and then the camera will start moving forward each scene sequentially as programmed. To view the camera executing a Sequence Line in full screen mode, please move the cursor onto th

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 68 monitoring. If the network Speed Dome Camera idles for a period of time, the selected function will be activated automatically; this is the HOME function. The HOME function allows constant and accurate monitoring to avoid the Dome Camera idling or missing events. Home Setting  Activate/Disable Home Function Select “On” or “Off” to activate or disable the Home function. Then press the “Set” button to save the setting.  Time The time here repr

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 23  Manual Focus: Click on the “manual” button, and users can adjust focus manually via “near” and “far” buttons. The status will also be displayed above the screen as shown below.

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 66 The Network Speed Dome Camera supports totally eight Sequence Lines; each Sequence Line consists of up to 64 Preset Points. Please refer to the instructions below to program a Sequence Line. NOTE: Before setting this function, users must pre-define at least two Preset Points. Sequence Setting Please press the “Edit” button in “Sequence Setting” section to enter the Sequence setting menu as shown in the next page.  Sequence Line Please select the number of Sequence Line to be set from the drop-down list in the top of the Sequence setting menu.  Sequential Pr

  • High Speed Dome Camera Version 1.0 91 STEP 2: Click on “Delete”, then tap the “Delete Files” in the “Temporary Internet files” section.

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 45 4.3.10 View User Information The Administrator can view each added user’s login information and privileges (see 4.3.2 Security ). View User Login Information All the users in the network will be listed in the “User information” zone, as shown below. As the figure below shows: User: 4321

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 19 4. Configuration & Operation The network Speed Dome Camera is provided with a user-friendly browser-based configuration interface, and a free bundled CMS (Central Management System) for video playback and recording. In this chapter, information about main page introduction, system related settings and camera settings will be described in detail. For further information about CMS software, please refer to 5. CMS Software Introduction and CMS user man

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 25 4.3 System Related Settings The figure below shows all categories under the “System” tab. Each category in the left column will be explained in the following sections. NOTE: The “System” configuration page is only accessible by Administrator.

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 62 4.5.1 Preset Programming Totally 256 Preset Points can be programmed for the network Speed Dome Camera. Please refer to the instructions below to set a Preset Point. Preset Setting To setup a Preset Point, please first move the cursor to the live view pane. Then left click and drag the red pointer with PTZ controls to a desired position. Subsequently, assign a number for the current position from the drop-down Number List, and enter its descriptive name. Press the button “Set” to save the settings mentioned above. Preset Go To have t

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 18 Camera setting pages. Image and Focus Adjustment The image displays on the Home page when successfully accessing to the IP Dome Camera. Adjust zoom and focus as necessary to produce a clear image.

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 92 The popup window for confirmation will come out as shown below. Click “Yes” to start deleting the files.

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 42 NOTE: The dwell time is only adjustable when selecting Preset as the alarm action. When the dwell time is up, the network Speed Dome Camera will go back to its trigger position and recheck alarm pin status. File Name Enter a file name in the File name field, ex. image.jpg. The uploaded image’s file name format can be set in this section. Please select the one that meets your requirements.  Add date/time suffix File name: imageYYMMDD_HHNNSS_XX.jpg Y: Year, M: Month, D: Day H: Hour, N: Minute, S: Second X: Sequence Number  Add sequence number suffix (no maximum

  • High Speed Dome Camera Version 1.0 64 To stop running a Cruise Path, simply move the cursor to the live view pane and move the camera in any direction. 4.5.3 Auto Pan Programming The network Speed Dome Camera supports four Auto Pan Paths. Please refer to the instructions below to set an Auto Pan Path. Auto Pan Setting To

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 33  MJPEG over HTTP port The default setting of HTTP Port is 8008; setting range: 1024 ~65535. NOTE: Be aware to choose the different port from the one set for the web server port. UPnP Setting  Enable UPnP When the UPnP is enable, whenever the network Speed Dome Camera is presented to the LAN, the icon of the connected network Speed Dome Cameras will appear in My Network Places to allow for direct acces

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 54 4.4 Video and Audio Streaming Settings Press the tab ”Streaming” in the top of the viewer window, and the configurable video and audio items will display in the left column. Configuration under the “Streaming” category include video resolution, video compression mode, video protocol, audio transmission mode, etc. Further details of these settings will be specified in the following sections.

  • High Speed Dome Camera Version 1.0 89 Appendix D: Upgrade the DC Viewer For users who have installed the DC Viewer in the PC previously and would like to upgrade the new one, please first remove the existing DC Viewer from the PC before accessing to the IP Camera. Remove the Existing DC Viewer Click “

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 83 Appendix B: Internet Security Settings If ActiveX control installation is blocked, please either set Internet security level to default or change ActiveX controls and plug-ins settings. Internet Security Level: Default Step 1: Start the Internet Explorer (IE). Step 2: Select <Tools> from the main menu of the browser. Then Click <Internet Options>. Step 3: Click the <Security> tab, and select <Internet>.

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 50 4.3.14 Software Upgrade Software upgrade can be carried out in the “Software Upgrade” page, as shown below.

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 8 1.2 Switch/Connector Definition There are various switches and connectors located on the Dome Camera’s back plate as shown in the figures below. Please refer to the diagrams and tables accompanied with for use of each switch/connector. Indoor-Classic Model Indoor-Standard Model Outdoor Model A None B Communication Switch (Reserved) C RJ45 Connector D 22-Pin Conne

  • High Speed Dome Camera Version 1.0 21 4.2 Home Page In the Home page, there are several function buttons below the displayed image. NOTE: Please note that the function buttons will vary depending on the camera model. Screen Size Adjustment Image display size can be adjusted to x1/2 and full screen. Digital Z

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 26 4.3.1 Host Name and System Time Setting Press the first category: <System> in the left column; the page is shown as below. Host Name The name is for camera identification. If alarm function (see 4.3.7 Application) is enabled and is set to send alarm message by Mail/FTP, the host name entered here will display in the alarm message. Time Zone Select the time zone you are in from the drop-down menu. Sync With Computer Time Select th

  • Allnet ALL2298, High Speed Dome Camera Version 1.0 55  H.264 D1 (30fps) + MJPEG CIF (30fps)  H.264 D1 (30fps) + H.264 D1 (30fps)  H.264 D1 (30fps) + H.264 CIF(30fps) Click “Save” to confirm the Video Format setting. Video Deinterlace The network Speed Dome Camera supports de-interlacing function. Users can either choose to activate de-interlacing function or disable the function by selecting a mode from the list as shown below:  3D Deinter

More Instructions:

DOWNLOAD

Related Products and Documents (Security Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Elenco Electronics XP-660 Instruction manual elenco-electronics/xp-660-1W7.pdf 22 Apr 2023 12 0.44 Mb
2 ADLINK Technology MXE-5401 Operation & user’s manual adlink-technology/mxe-5401-634.pdf 20 Nov 2022 88
3 Bogen PCM2000 Operation & user’s manual bogen/pcm2000-519.pdf 11 Oct 2023 3 0.38 Mb
4 Denon Envoi Go Operation & user’s manual denon/envoi-go-Y86.pdf 05 Oct 2023 60
5 Plustek SmartOffice PS30D Quick start manual plustek/smartoffice-ps30d-HNG.pdf 04 Jan 2024 2
6 Bullant ABA50WR Operation & user’s manual bullant/aba50wr-RR6.pdf 01 Oct 2023 5

Similar Resources:

  • urmet domus

    1092/255H

    (20 pages)
    DS1092-216A TELECAMERA COMPATTA AHD 1080P DAY & NIGHT OTTICA VARIFOCAL 6-22MM 1080P AHD DAY & NIGHT CAMERA 6-22MM VARIFOCAL LENS BUILT-IN AHD 1080P TAG & NACHT KOMPAKTKAMERA FESTOBJEKTV 6-22MM CAMÉRA COMPACTE AHD 1080P DAY & NIGHT OPTIQUE VARIFOCAL 6-22MM CÁMARA COMPACTA DÍA/NOCHE AHD 1080P CON LENTE VARIFOCAL 6-22MM INTEGRADA Sch …
  • Speco

    CVC-927PTZ

    (46 pages)
    SPECO TECHNOLOGIES CVC-927PTZ DOME CAMERA Instruction Manual Please read this manual thoroughly before use and keep it handy for future reference. Rev.040812 …
  • Samsung

    SCC-B9374

    (1 pages)
    34 / 35SAMSUNG VIDEO SECURITY SYSTEM I CAMERASSCC-B9374Anti-Vandal Dome IR LedsDay & Night Camera|Dimensions (unit:mm)• 1/3" 410K/470K pixels Super-HAD CCD• 540(Color)/570(BW) TV lines resolution• Minimum scene illumination : 0 Lux with IR-LED(18pcs)• Vari-focal(3.8~9.5mm) auto iris lens built-in F1.2• Color & B/W changing time selec …
  • Longse

    LIRDNAD130

    (2 pages)
    LIRDNAD130 Color Camera Vandalproof IR Dome Color Camera Specification Packing List No Name Model Number 2. User Guide LIRDNAD130 1 1. Vandalproof IR Dome Color Camera LIRDNAD130 1 Franchiser: Notes:Before providing power for the camera, please read this User Guide in detail! …
  • ICRealtime

    Elite

    (10 pages)
    Quick Start Guide12MP Elite BulletNetwork CameraFeatures and SpecificationsA. OverviewB. Cable InterfaceCamera InstallationA. Installation StepsB. Restore Factory Defaults andInstalling SD cardQuick Configuration ToolA. OverviewB. OperationWeb OperationA. Network Connection B. Login and Logout AppendicesC. FAQD. Toxic or Hazardous Elements223-4555-677-899- …
  • Vista

    VBC-800NI30-WC

    (1 pages)
    Night Vision CameraUser Guide1. FeaturesIntegrates vari-focal lens allows for versatile utilization.NIGHT VISION CAMERAThe camera provides automatic mode change over by sensing day or night conditions. It canchange color mode in the day condition tooptimal color and B/W mode in night conditionfor clear identification. ( Only the IR Cut filter removal Day/Nig …

Comments, Questions and Opinions: