Allnet ALL7950 Quick User Manual

Text of Allnet ALL7950 User Guide:

• Allnet ALL7950, Allnet ALL7950 User Manual 44 10.0 Troubleshooting The following troubleshooting information can be used to help solve most common problems. QUESTION RECOMMENDED ACTION There is no DIAL tone 1. Check if there are any loose connections. Nothing is displayed on the LCD screen 1. Check if power cord is connected properly. 2. Check if there is 120V AC coming from the power outlet. How do I update the Firmware? 1. ATC IP Phone automatically updates firmware when it powers up (while connected to the internet). Why can’t I dial my friend’s SIP number? 1. Check Registrar Server Domain Name/IP address and Outbound

• Allnet ALL7950, Allnet ALL7950 User Manual 26 7.8 SIP Setting – SIP Phone Setting, Registrar and Proxy Server Session Initiation Protocol (SIP) is the most popular Voice over IP standard. It enables two or more people to make phone calls, share multimedia and make multimedia conference over the internet. Please have an administrator setup these settings for you or obtain this information from your SIP service provider. SIP Phone Portnumber SIP phone port number. SIP Server Domain Name/IP Address Registrar server domain name or IP address. SIP Server Portnumber Re

• Allnet ALL7950, Allnet ALL7950 User Manual 18 6.15 Language Selection The VoIP Phone (model no. ALL7950) supports four languages: English, German, Spanish and Italian language on the display and configuration-pages. 6.16 Time Format You may select the 12hr or 24hr time format. 6.17 Volume Adjustment 6.17.1 Ringer Volume While the handset is in place, Press to increase the ringer volume and to decrease the ringer volume. • Press followed by • Use or to select the preferred language • Press when done Language: English • Press

• Allnet ALL7950, Allnet ALL7950 User Manual 14 3 4 6.5 SNTP Server IP Simple Network Time Protocol (SNTP) is a protocol used to help match your system clock with an accurate time source. If you do not know your SNTP Server IP, please ignore this section. SNTP Server IP address can be either URL or IP. 6.6 Do Not Disturb This setting allows the user to reject all incoming phone calls. • Press • Enter the subnet mask • Press • Enter the router IP address • Press • Enter SNTP server IP or URL • Press • Use

• Allnet ALL7950, Allnet ALL7950 User Manual 39 While having a conversation: 1. Press Mute . You may press Mute key again to resume conversation. 8.6 Call Transfer While having a conversation: 1. Press Hold to put the person on the other line on hold. 2. Dial the IP address or the extension number where you like the call to be transferred. 3. Press Transfer to transfer the call. 8.7 Redial Note: To return to idle mode, press CANCEL key 8.7.1 Last Dialed Number 1. Lift handset or press SPEAKER button 2. Press Redial to dial the last dialed number.

• Allnet ALL7950, Allnet ALL7950 User Manual 7 4.0 SUMMARY OF KEY FUNCTIONS Keys Functions (1) LCD Display Displays menu, time, clock, name, phone number, call status (2) OK/Right Confirm setting change, exit menu, dial, save changes (3) Menu Access the phone menu (4) Mute/Function Disable user’s microphone so that the person on the other line can not hear anything, access the language selection, access the time format (5) Transfer Transfer the person you are currently having a conversation to another line (6) Redial/Call History Redial last dialed number, acc

• Allnet ALL7950, Allnet ALL7950 User Manual 5 1.0 INTRODUCTION Voice over IP (also known as Internet Phone) is a technology that allows anyone to make a telephone call over the Internet. This is a quick user guide for the ALL7950 SIP Phone. It is intended to help you configure the telephone and have it ready to run within a few minutes. Please follow the user guide carefully as troubleshooting the telephone can be very difficult and time consuming. 2.0 PACKAGE CONTENT The following materials are included in the package. Please check the package to ensure that al

• Allnet ALL7950 User Manual 3 TABLE OF CONTENTS 1.0 INTRODUCTION .................................................................................................. 5 2.0 PACKAGE CONTENT.......................................................................................... 5 3.0 LIST OF FIGURES ....................

• Allnet ALL7950, Allnet ALL7950 User Manual 10 Do Not Disturb: ENABLE/DISABLE CF Unconditional: ENABLE/DISABLE CF User Busy: ENABLE/DISABLE CF No Answer: ENABLE/DISABLE A nonymous Call: ENABLE/DISABLE A nony Call Rej: ENABLE/DISABLE Ringing Type: Ringing1/2/3/4 M AC Address: 00D0E90137DB V ersion: V: 02.09.15 Press the MENU key UPDATE CHANGES? <OK> OR <CANCEL> Ringing1/2/3/4 - select ringing1, 2, 3 or 4

• Allnet ALL7950, Allnet ALL7950 User Manual 17 NOTE: At this point, you may save the settings and exit. The next two sections explain how to obtain the MAC address and firmware version. 6.13 MAC Address This menu displays the MAC address. User cannot modify MAC address. 6.14 Version Version menu displays the firmware version. You cannot modify the version number. NOTE: You can also display the current IP-address of the ALL7950 IP-phone at any time, if you press the Func.-key followed by the number 9. • Press • MAC address is displayed on the screen • Press • Firmware version is displayed on screen MAC Address: 00D0E9017DB • Press to exit menu

• Allnet ALL7950 User Manual 41 8.10 Three Way Conference 1. Pick up the handset and call Person A. 2. After Person A pick up the phone, press Hold key to place Person A on hold. 3. Dial the extension or phone number of Person B and wait until Person B picks up the phone. 4. Press Conference key to begin 3-way conference. 9.0 USING

• Allnet ALL7950, Allnet ALL7950 User Manual 13 3 4 DISABLE DHCP 1 2 • Press • Subnet mask automatically acquired Subnet Mask: 255.255.255. 0 • Press • Use or to set DHCP to DISABLE • Press • Enter the IP address • Press • Router IP automatically acquired Router IP: 192.168.001.161 DHCP: DISABLE IP Address: 192.168.001.161

• Allnet ALL7950 User Manual 45 when you unplug the power. If new version is available the phone will automatically update the firmware. 2. Check if FTP address is correct. 3. Check with your supplier if firmware filename is correct. I accidentally set DSL to enable and now the phone does not boot up 1. Unplug the power cord from the IP phone. Wait 2 seconds and plug the power cord back in the IP

• Allnet ALL7950 User Manual 34 7.16 Phone Book Phonebook menu allows the user to add, modify and delete phone numbers. To add, type in the name and number then click NEW to add. To modify/delete, select the name from the list and click modify/delete. Name Name that you would like to add. Phone Number Phone number or URI that corresponds to the name.

• Allnet ALL7950, Allnet ALL7950 User Manual 19 6.17.2 Speaker Volume While the handset is in place, • Press • Press to increase the speaker volume and to decrease the speaker volume 6.17.3 Handset Volume • Pick up the handset and press to increase the volume or press to decrease the volume

• Allnet ALL7950, Allnet ALL7950 User Manual 15 6.7 CF (call forward) Unconditional Enable CF Unconditional to forward all the incoming calls to another number. Otherwise set to disable. You will need to use a web-browser to input the forwarded phone number. Refer to section 7.0 for more information on call forwarding. 6.8 CF (call forward) User Busy Forward all the incoming calls to another number when user is busy on the phone. 6.9 CF (call forward) No Answer Forward all incoming calls to another phone number after a certain number of rings. • Press • Use or t to select ENABLE or DISABLE • Press • Use or to select EN

• Allnet ALL7950, Allnet ALL7950 User Manual 9 6.0 IP PHONE SETUP 6.1 Menu Summary Enable Disable DisableEnable Press the MENU key Display Name: Allnet_45 A DSL DIALUP: ENABLE/DISABLE A DSL DIALUP: ENABLE A DSL DIALUP: DISABLE A DSL ID: 02…[email protected] A DSL Password: ******** DHCP: ENABLE/DISABLE IP Address: AUTO IP Address: 192.168.001.151 Subnet Mask: AUTO Router IP: AUTO Subnet Mask: 255.255.255.000 Router IP: 061.063.083.254 SNTP Server IP: 192.5

• Allnet ALL7950, Allnet ALL7950 User Manual 20 7.0 USING THE CONFIGURATION MENU The configuration menu can be accessed using a web browser. Some advanced features such as CF Unconditional, CF User Busy and CF No Answer must be setup from the web browser. 7.1 Accessing Configuration Menu • Open the web browser (ie. Internet Explorer, Netscape…) • Type in the IP Address of the phone followed by :9999 IP address is provided by your Internet Service Provider (ISP). If your ISP supports DHCP, you may obtain the IP address from you phone. Press MENU and s

• Allnet ALL7950, Allnet ALL7950 User Manual 43 9.3 Editing a Number 1. Press the PHONE BOOK key to access the phonebook. 2. Press until the name is displayed on the screen. 3. Press the PHONE BOOK key again. 4. Select “Edit” and press OK to edit. 5. Enter a new name and press OK 6. Enter the new phone number and press OK 7. Press OK to save and override the previous name and phone number. 9.4 Deleting a Number 1. Press the PHONE BOOK key

• Allnet ALL7950, Allnet ALL7950 User Manual 38 8.2 Speed Dialing 1. Lift handset or press SPEAKER button 2. Dial Speed Dial number. For example: dialing speed dial number 08 8.3 Answering a Phone Call Note: The CANCEL key may be used to reject a call. When phone rings: 1. Lift handset or press SPEAKER button to begin conversation. 8.4 Switching to Another Line While having a conversation: 1. Press Hold to switch to another line. 8.5 Mute Note: While mute is activated, sound from the caller can be heard from your speaker but your sound can’

• Allnet ALL7950 User Manual 8 5.0 CONNECTING THE IP PHONE Connect the IP Phone as the following diagram: Wide Area Network / Internet Cable/xDSL Modem Power Adapter Router/HUB Ethernet Cable Ethernet Cable

• Allnet ALL7950, Allnet ALL7950 User Manual 35 7.17 Speed Dial Speed dial numbers can be accessed from the IP phone. Refer to section 8.2 for speed dial info. Number 0x Speed dial phone number. 0x is the speed dial number. 7.18 Restart System Click Restart to update all the modifications and reboot the system.

• Allnet ALL7950, Allnet ALL7950 User Manual 37 8.1.2 SIP Number Note: You have to register with SIP server to use SIP number. 1. Lift handset or press SPEAKER button 2. Dial SIP number. For example: dialing 1866 3. Press OK or wait until the timer expires.

More Instructions:

Allnet ALL7950 Quick user manual 16-11-2022 49

DOWNLOAD

Related Products and Documents (IP Phone):

Comparable Devices:

Similar Resources:

• Cisco 7941 (4 pages) …

• Cisco Unified IP Phone 8941 (208 pages) Cisco Unified IP Phone 8941 and 8945 Administration Guide for CiscoUnified Communications Manager 10.0 (SCCP and SIP)First Published: 2014-01-09Last Modified: 2017-05-02Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883 …

• Panasonic KX-TPA50 (10 pages) Thank you for purchasing a Panasonic product.Please read this installation manual before using the unit and save it for future reference.This unit is an additional handset compatible with the following series of Panasonic SIP Cordless Phone: KX-TGP500/KX-TGP550You must register this handset with your base unit before it can be used. This installation manual …

• Panasonic KX-TGP600 (10 pages) 1 PRIMUSBUSINESS.CA PRIMUS BUSINESS SERVICES | HOSTED PBX | PANASONIC TGP600 TPA60 TPA65 QUICK SETUP GUIDE PANASONIC TGP600/TPA60/TPA65 QUICK SETUP GUIDE Online instructional videos and manufacturer user guides are also available. Visit www.primus.ca/hpbxguide for more information. What You Need  Panasonic base unit and cordless ha …

• Cisco 7902G - Unified IP Phone VoIP (208 pages) Corporate HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 526-4100Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP)Cisco Unified IP Phones 7902G, 7905G, and 7912GText Part Number: OL-8151-01 …

• NEC SV8300 (6 pages) Page 1 of 6 North American Telecommunications Group For Service: 604-856-9155 / [email protected] SV8300 & SV8000UM VOICEMAIL ADMINISTRATION GUIDE …

Comments, Questions and Opinions: