Manualios.com

Ana-U EasyPrinter S3 Operation & User’s Manual

Ana-U EasyPrinter S3 Manual Online:

3.65, 1306 votes
Ana-U EasyPrinter S3 User Manual
Ana-U EasyPrinter S3 User Guide
Ana-U EasyPrinter S3 Online Manual

Text of Ana-U EasyPrinter S3 User Guide:

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual Navigation To enter the menu from "Idle State", press the "SELECT"-button. To select the appropriate menu item, move the ">" sign to the menu item and press the select button. To change setting, move the ">" sign with the "UP"/"DOWN"-button to the menu item and press the select button. Then use "UP"/"DOWN"-button to change the setting. Finally press "SELECT" to leave the change mode. Submenus Idle State of the Printer The printer is waiting for commands to proceed. To enter the menu, press the "SELECT"- button. Main Menu Select a submenu and press the "

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual Thickness of Cards: This device is made to process cards with thickness between 0.3 mm and 0.9 mm. To ensure the quality of the TRW surface, we also recommend testing and approval of cards by ANA-U with about 50 card samples. Further card productions should be checked against those samples, to ensure the same quality and behaviour. Rewritable Materials The following materials are currently compatible: • Mitsubishi Blue TRW foil • Mitsubishi Black TRW foil Environment You should position your printer on

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual Printer Driver Installation System Reqirements Computer and processor: 500 MHz or faster processor Memory: 256 MB RAM; 512 MB Hard disk: 200 MB available disk space Operating system: Windows XP (must have SP3) (32-bit), Windows 7, Windows Vista with Service Pack (SP) 1, 32- or 64-bit OS. Additional Requirements: .NET Framework 2 with Service Pack (SP) 2 or higher Installing the printer on a windows system 1. Install the printer driver BEFORE the printer is connected to the PC. The printer driver can be downloaded from this location: • ftp://ana-u.homeserver.com/WinDriverSetup.exe 2. Connecting the printer to the PC • Serial and

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual General Information Introduction The ANA-U EasyPrinter is an industrial printer for ISO plastic cards, with TRW foil coating. It can be adjusted to variaous kinds of different TRW foils by adjusting the print energy settings. The industrial metal design is perfect for high end applications and kiosk usage. The 32-bit motherboard allows a perfect and very fast printing. The ANA-U EasyPrinter is equipped as standard with Serial-, USB and Ethernet- Interfaces.

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual Adjust hopper to card thickness To ensure optimal card separation, the hopper has to be adjusted to the cards. To proceed, turn the lever to left or right, as shown. Left Endposition: Max. card thickness (approximatly 0,9mm) Right Endposition: Min. card thickness ( approximatly 0,3mm) Charging the hopper 1. Insert cards into the hopper as shown in Picture 1. 2. Insert "Hopper Load" on top of the last card. (The hopper load ensures that all cards can be fetched from the hopper) Page 9 of 25 Version 1.4 - 27. March 2012 Picture 1: Insert cards Picture 1: Lever in Left Endposition Picture 2: Lever in Middle Position Picture 2: Insert "Hopper

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual Maintenance and Service Regular maintnance and service can significantly increase the printers lifetime. We recommend to clean the transport belt and rollers after a maximum of 1.000 cards, or at least ervery 3 months. Appropriate cleaning materials for the maintnance and service of your printer are available at ANA-U or partners of ANA-U. WARNING: Using non approved cleaning materials may lead to damage or poor printer functionality. WARNING: Imminent danger of explosion and fire when using flammable cleaning agents. Cleaning the printer The printer contains

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual 3. Insert Cleaning card into front card slot. 4. Printer cleans itself. After the cleaningcycle, the printer ejects the cleaning card. 5. Now the printer is ready to use again. Page 20 of 25 Version 1.4 - 27. March 2012 Picture 3: Area to spray to Picture 4: Insert Cleaning card Picture 5: Cleaning card in cleaning position

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual Imprint ANA-U GmbH Moosgrabenstrasse 32 A-8200 Gleisdorf Austria Page 25 of 25 Version 1.4 - 27. March 2012 Copyright © ANA-U GmbH 2012 The content of these instructions is not allowed to be duplicated, processed or translated in any form, either in its entirety or extracts thereof, without the written approval of the company ANA-U GmbH. All technical specifications, drawings, etc. are subject to the law relating to the protection of copyright. The manufacturer of the

  • EasyPrinter S3 Users Manual ANA-U Printer SDK For easy implementation of the printer into your own program, we provide a software development kit including a .NET EasyPrinter component. It handles all communication to the printer via all supported interfaces. The ANA-U EasyPrinter Library can be downloaded from: • ftps://ana-u.homeserver.com/EasyPrinter/Software/PC U

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual 7. Pull off the printheads cable 8. Remove the printhead to the left side. 9. Insert the new printhead. 10. Tighten screws and plug in printheads cable. 11. Plug in power cable. Now the printer is ready to use. Page 22 of 25 Version 1.4 - 27. March 2012 Picture 3: Unplug printhead cable Picture 4: Remove printhead

  • Ana-U EasyPrinter S3, Versionhistory Version 1.0 – 10.November 2011: • Creation of the document (Applies to Firmware: EP000207) Version 1.1 – 18.November 2011: • Internetlink updated Version 1.2 – 13.December 2011: • Print- and Erasearea added Version 1.3 – 02.January 2012: • Errorcodes added Version 1.4 – 27.March 2012: • User Interface updated • Spare parts updated Liability Statement This ANA-U product has been built in accordance with the ISO 9001standard. ANA-U GmbH makes no claims regarding this product, its commercial quality or its suitability for any particular task. Please note and heed the WARNING and

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual Technical specifications • Industrial design with high end belt transport • Transport 300 mm/s, printing 150 mm/s, erasing 50-100mm/s • Graphics and text mode (3 internal fonts) • Windows driver for printing text and graphics • Resolution: 300x300 dpi, greyscale dithering • Serial Interface: 57600 Baud (8 Databits, No Parity, One Stopbit), Hardwarehandshake • USB interface Rev 2.0 • Ethernet interface (TCP/IP socket connection – Port: 50020) • Prints cards with thermochromic surface and thermo-direct tickets • Mifare as standard, any other ty

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual Replacing the printhead Warning and Safety Notice: 1. Some printer components are very hot. Ensure that you allow enough time to cool down those components after usage. 2. Do not open the printer without first disconnect it completely from the power supply. Printheads are sensitive to static electricity. Avoid contact with all electronic components while working with the print head. Required materials: 1. At the printers User Interface navigate to "SERVICE>PH REPLACEMNT" and press "OK". 2. Wait until printers headmovement is done (takes about 1 second). 3. Now the printhead is

  • EasyPrinter S3 Users Manual 4. Change to Network printer If a serial printer is already installed, else follow the instructions at Pt. 3 first) Now change the interface to network, with the following actions: Page 15 of 25 Version 1.4 - 27. March 2012 Step 12: At "printer and fax" open "printer properties" from "ANA-U EasyPrinter"...

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual User Interface Buttons The buttons on the display are used to navigate through the menu and change printer settings. Icon Action "UP"-button. "DOWN"-button. "SELECT"-button. LED Notifications The LEDs indicate the printers working state. LED Definition LED is on: Printer in error mode. LED if off: Printer in normal mode. LED is on: Printer ready to insert card. LED is off: Printer in idle state. LED is on: Printer is powered on. LED is off: Printer is not powered on. Page 10

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual Spare Parts Contact adress: ANA-U GmbH Moosgrabenstraße 32 8200 Gleisdorf, AUSTRIA E-Mail Support: [email protected] Website: http://www.ana-u.com Spare part and Support Hotline: +43 3112 368 41 Ordercode Productname 330376 Print- and Eraseunit 300 dpi, longlife coating 330377 Power supply 330003 Cleaning set EasyPrinter S3 5 reusable cleaning cards 1 cleaning fluid 330379 Weight for hopper standard 330358 Long mouthpiece for S3 OEM 330357 Short mouthpice for S3 OEM 330359 Weight for

  • EasyPrinter S3 Users Manual Page 14 of 25 Version 1.4 - 27. March 2012 Step 1: At "printer and fax" click on "Add printer"... Step 5: Select "Local printer" and uncheck "Plug and Play" then click "Next"... Step 4: Click "Next"... Step 6: Select the printers COM port (for Ethernet select a temporary one) and click "Next"... S

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual Components The EasyPrinter component is located directly in the installation location folder. Filename Description EasyPrinter.dll (ana-uapi.dll) The main component for controlling the printer.(To use this component, also the ana- uapi.dll has to be referenced in the project!) PCSCMifareReader.dll (SmartCard.dll) This component is used to exchange data with the printers option RF_Mifare. (To use this component, also the SmartCard.dll has to be referenced in the project!) .\Documentation\EasyPrinter Component Documentation.chm Documentation of the EasyPrinter component .\Documentation\PCSC Mifare Reader Component Documentation.chm Documentation of the PCSCMi

  • Ana-U EasyPrinter S3, EasyPrinter S3 Users Manual Page 16 of 25 Version 1.4 - 27. March 2012 Step 14: Select "ANA-U easyPrinter (TCP/IP)" and click on "New Port..." Step 15: Enter a name for the port and the IP-address of the printer, then click "OK" and close all other windows. Now the printer is installed and ready to use!

More Instructions:

DOWNLOAD

Related Products and Documents (Printer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Audio Service Mobile Connect Set Operation & user’s manual audio-service/mobile-connect-set-655.pdf 05 Oct 2023 33
2 Xerox WorkCentre 7346 Specifications xerox/workcentre-7346-A95.pdf 02 Nov 2022 14 0.4 Mb
3 Adaptec APA-358 Installation manual adaptec/apa-358-8W4.pdf 30 Jan 2023 12 0.2 Mb
4 Motorola MA357 - E30 Camouflage Cordless Phone Start here manual motorola/ma357-e30-camouflage-cordless-phone-O74.pdf 22 Dec 2023 60 1.37 Mb
5 Smeg FC33S User manual manual smeg/fc33s-83A.pdf 14 Aug 2023 15 0.54 Mb
6 LG GB7143**AV Service manual lg/gb7143-av-5HP.pdf 13 Feb 2023 74

Similar Resources:

  • OKIDATA

    ML-520

    (2 pages)
    OSR OKIDATA ML-520Printing method. . . . . . 9-pin, impact, dot matrixCarriage width . . . . . . . 8.0 inchesPaper. . . . . . . . . . . . . . . 3" - 10", 12 - 24 lb., up to 5-partPrint head life . . . . . . . . 200 million charactersRibbon life . . . . . . . . . . . 4 million charactersForm thickness. . . . . . . Automatic adjustPrint speed @ 10 …
  • Ricoh

    3245

    (108 pages)
    Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=104 // Print scale=81%Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 4.160000 mmFAX Option Type 3245 Operating Instructions Facsimile Reference <Basic Features>B7128510 FAX Option Type 3245 Operating Instructions Facsimile Reference <Basic F …
  • HP

    Latex 115

    (36 pages)
    1© Copyright 2016, 2017 HP Development Company, L.P.Large Format DivisionCamí de Can Graells 1-21 · 08174Sant Cugat del VallèsBarcelona · SpainAll rights reservedPrinted in XXX*1QE01-90005*1QE01-90005 HP Latex 115/300 Printer Series Printer assembly instructionsInstructions d’assemblage de l’imprimanteAnleitung zur DruckermontageIstruzioni per l� …
  • Oki

    ML320

    (1 pages)
    12Pin Signal Symbol DirectionAiguille Signal Symbole OrientationPin Señal Símbolo SentidoPino Sinal Símbolo Direção1 Protective Ground PG —2 Transmitted Data TD f.p.*3 Received Data RD t.p.**4 Request to Send RTS f.p.5— ——6 Data Set Ready DSR t.p.7 Signal Ground SG —8-10 — — —11 Supervisory Send Data SSD f.p.12-19 — — —20 Data Term …
  • KOMDRUCK

    ILP-1100 Series

    (8 pages)
    ILP-1100 Serie (Ink-Label-Printer) Quick Guide KOMDRUCK AG Auf der Binn 7-9 D-64658 Fürth (Odenwald) Fon: +49 (0)6253 - 20256-0 Fax: +49 (0)6253 - 20256-111 Mail: [email protected]
  • Epson

    Stylus Color 740i

    (69 pages)
    Printed on recycled paper with at least 10% post-consumer content. Printer Ba sicsPrinter BasicsPrinter Basics740i.book Page i Thursday, April 15, 1999 2:11 PM …

Comments, Questions and Opinions: