Manualios.com

Siemens 43B1-M Operation & User’s Manual

Siemens 43B1-M Manual Online:

3.1, 2516 votes
Siemens 43B1-M User Manual
Siemens 43B1-M User Guide
Siemens 43B1-M Online Manual

Text of Siemens 43B1-M User Guide:

  • Siemens 43B1-M, A26361-K883-Z100-1-5E19 English Contents Introduction........................................................................................................................................1 Notational conventions ..............................................................................................................2 Important notes .................................................................................................................................2 Safety....................................................................................................................

  • A26361-K883-Z100-1-5E19 English - 1 Introduction Your new LCD (Liquid Crystal Display) monitor 43B1-M offers numerous features and functions, for example: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements thanks to slim casing • height adjustment and ability to turn (portrait mode) • optimum ergonomic characteristics (totall

  • Colour monitor 43B1-M 2 - English A26361-K883-Z100-1-5E19 Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. i Supplementary information, remarks, and tips follow

  • Siemens 43B1-M, Colour monitor 43B1-M A26361-K883-Z100-1-5E19 English - 3 • In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign matter), switch off the unit, disconnect the power plug and contact your sales outlet or our Help Desk. • The screen background lighting contains mercury. You must observe the applicable handling and disposal safety regulations for fluorescent tubes. • Only qualified technicians should repair the device. Unauthorised opening and incorrect repair ma

  • Siemens 43B1-M, Colour monitor 43B1-M 4 - English A26361-K883-Z100-1-5E19 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Fujitsu Siemens Computers GmbH is n

  • Siemens 43B1-M, Colour monitor 43B1-M A26361-K883-Z100-1-5E19 English - 5 Power cable To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set. • The female/male receptacles of the cord set must meet CEE-22 requirements. • The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath or on the insulation of one of the inner conductors. • For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. For devices which sit on the floor, only SJT type cable sets may be used. • The cable set must be select

  • Siemens 43B1-M, Colour monitor 43B1-M 6 - English A26361-K883-Z100-1-5E19 Checking the contents of the consignment Ê Unpack all the individual parts. Ê Check the delivery for damage incurred during transportation. Ê Check whether the delivery agrees with the details in the delivery note. The complete LCD monitor package includes: − a monitor with permanently connected data cable − a power adapter with power adapter cable − one power cable − one floppy disk − one Warranty Booklet − this Operating Manual Should you

  • Siemens 43B1-M, Colour monitor 43B1-M A26361-K883-Z100-1-5E19 English - 7 Installing an ergonomic video workstation Before you set up your equipment, you should select a suitable position for working at the monitor. Please observe the following advice when installing a video workstation. Window permissible reaching sector 600 mm edge of desk permissible reaching sector 600 mm Avoid direct and reflected glare. Avoid glare from electric lighting. Position the keyboard where it is easiest to reach. 30° 30° 65° 65° 0° 60° 0° permissible viewing sector preferable viewing sector permissible viewing sector approx. 90° and more approx. 90° Position the monitor for optimum viewing. The viewing dista

  • Siemens 43B1-M, Colour monitor 43B1-M 8 - English A26361-K883-Z100-1-5E19 1 2 3 4 Ê Be sure that the monitor and the computer are switched off. ! The computer power plug must be pulled out! The permanently connected data cable is equipped with a 15-pin D-SUB plug for connection to the computer. Ê Connect the connector of the data cable to the active monitor port on the computer and secure the plug-in connection by tightening the safety screws (1). i If your computer has two monitor ports ("onboard"

  • Siemens 43B1-M, Colour monitor 43B1-M A26361-K883-Z100-1-5E19 English - 9 Tilting and turning area 25 5 The typical monitor base allows you to adjust the tilt of the display by 5° forward and by 25° back. Operation of the monitor 1 2 3 4 5 6 7 8 9 10 1 = AUTO button 2 = Brightness 3 = Contrast 4 = MENU button 5 = Power indicator 6 = Power button 7 = Headphones port 8 = Volume control 9 = Audio input 10 = Security slots for Kensington Lock Anti-theft protection A lock (Kensington Lock) can be mounted in the securi

  • Siemens 43B1-M, Colour monitor 43B1-M 10 - English A26361-K883-Z100-1-5E19 Switching the monitor on/off The ON/OFF switch (6) is used for switching the monitor on and off. The power indicator (5) glows green when the monitor and computer are switched on. The power indicator glows amber when the monitor does not receive a video signal or is in the energy-saving mode. The power indicator goes off when the monitor is switched off. When you switch the computer system on, you must proceed in the following order: Ê First switch the LCD monitor on with the ON/OFF switch (6). Ê Then switch on the computer. i If your computer has a power management function (energy-s

  • Siemens 43B1-M, Colour monitor 43B1-M A26361-K883-Z100-1-5E19 English - 11 Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs. Basic monitor adjustment with a test pattern If one of the operating systems Windows for Workgroups, Windows 95/98, Windows NT, Windows Me, Windows 2000 or OS/2 (with Windows emulation installed) is used, the basic monitor settings can be set with the floppy disk supplied. Ê Insert the supplied floppy disk into the

  • Siemens 43B1-M, Colour monitor 43B1-M 12 - English A26361-K883-Z100-1-5E19 Adjusting the contrast Ê Press the 4 button to activate the setting window for contrast (Contrast). Ê Set the contrast with the 3 or 4 buttons, until the picture appears correct. Ê Press the AUTO button to save the settings and to switch the OSD menu off. If you make no changes for 60 seconds, the settings will automatically be saved and the OSD menu will be deactivated. Monitor settings using the OSD menu You can use the buttons on the control panel to set the screen display via an integrated OSD menu (On-Screen-Display). i The OSD menu is available in five languages (default setting: English). With

  • Colour monitor 43B1-M A26361-K883-Z100-1-5E19 English - 13 If you want to change other settings, select the corresponding function from the main menu. All possible adjustments of the monitor are described in the following. Setting the contrast of the display (Contrast) If the contrast is set too high, bright grey levels can no longer be distinguished from very bright gre

  • Colour monitor 43B1-M 14 - English A26361-K883-Z100-1-5E19 Locking the OSD menu (OSD Lock) The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings. Ê Switch your monitor off. Ê Press and hold down the 3 and 4 buttons and switch on the monitor simultaneously. The OSD menu is locked. If you press the MENU button and the OSD menu is locked

  • Siemens 43B1-M, Colour monitor 43B1-M A26361-K883-Z100-1-5E19 English - 15 Technical data Dimensions and weight (LCD monitor) Visible diagonals: 43,2 cm Dot pitch: 0,264 mm Screen size: 339,70 mm x 272,10 mm Maximal resolution: 1280x1024 pixel Luminance: 250 cd/m 2 (typical) Dimensions (W x H x D) incl. monitor base: 407 mm x 427 mm x 195 mm Turning area: 5° forward, 25° back Weight: approx. 5.5 kg Accessories: Power cable (1.8 m), power adapter, audio cable Storable display modes: 18 Electrical data Rated mains voltage: Frequency: 100 V - 240 V (±10 %) 5

  • Siemens 43B1-M, Colour monitor 43B1-M 16 - English A26361-K883-Z100-1-5E19 VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings. i If the monitor 43B1-M is not yet displayed in the list of monitors, you can select the following monitor instead: C383 FA or 3814 FA Supported modes i The display

  • Siemens 43B1-M, Colour monitor 43B1-M A26361-K883-Z100-1-5E19 English - 17 Pin assignment D-SUB 1 5 6 10 15 11 Pin Meaning Pin Meaning 1 Video input red 9 +5 V for DDC 2 Video input green 10 Sync. ground 3 Video input blue 11 Ground 4 Ground 12 DDC-Data 5 DDC ground 13 H. sync 6 Red video ground 14 V. sync 7 Green video ground 15 DDC Clock 8 Blue video ground Trouble shooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our Help Desk

  • Siemens 43B1-M, Colour monitor 43B1-M 18 - English A26361-K883-Z100-1-5E19 No display (power indicator lights) Ê Check whether the computer is switched on. Ê Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. Ê Press any key on the computer keyboard – the computer may be in energy saving mode. Ê Alter the brightness and/or contrast until you get a picture. Picture disturbances (vertical and horizontal lines, picture noise) Ê Perform auto-adjustment. i If one of the operating systems Windows for Workgroup

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Nel-Tech Labs iLink Installation & user manual nel-tech-labs/ilink-332.pdf 01 Dec 2022 16
2 LENCO Diverso-700GY Operation & user’s manual lenco/diverso-700gy-I68.pdf 06 Dec 2023 88
3 Lenovo ThinkCentre 41N5626 Operation & user’s manual lenovo/thinkcentre-41n5626-H5H.pdf 20 Jan 2024 72
4 NETGEAR WGR614L Datasheet netgear/wgr614l-WBW.pdf 07 Jun 2023 2
5 Thule 3003 Fitting instructions manual thule/3003-I3P.pdf 29 Nov 2022 8
6 GE Appliances GSD4410 Owner's manual ge/appliances-gsd4410-BLE.pdf 03 Jun 2023 28 5.25 Mb

Similar Resources:

  • CCTV

    41657

    (17 pages)
    17” – 19” PROFESSIONAL LCD COLOUR MONITOR ART. 41657 - 41659 Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo) http://www.comelit.eu e-mail:[email protected]
  • 3M

    Digital Walldisplay 9000PD Plus

    (12 pages)
    Getting Startedquick reference guiderapide guideanleitung für den schnellen einstiegrapido manualeinicio rápidocomputer & remote mousesouris d’ordinateur et de commande à distance / computer und entfernte maus / computer e mouse remoto / ordenador y ratón remotocomputer & interactive stylusordinateur et stylet interactif / computer und interakt …
  • V7

    D1912

    (1 pages)
    The data in this publication is for illustration purposes only and dose not necessarily represent standards or specifications which must be met by V7. Design and specifications are subject to change without prior notice. Trademarks belong to their respective owners. No responsibility assumed and all liability for damages resulting from use of this informa …
  • ViewSonic

    VX1962wm - 19" LCD Monitor

    (56 pages)
    ViewSonic VX1962wm/wmp-3 Model No. VSXXXXX 19” Color TFT LCD Display (VX1962wm/wmp-3_SM Rev. 1a Apr. 2009) ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583 Service Manual …
  • ViewSonic

    E95

    (2 pages)
    E95 MonitorViewSonic®E2®Series• 0.22mm horizontal dot pitch0.26mm diagonal dot pitchThis super fine dot pitch produces clear,crisp images with great picture defini-tion, even at the highest resolutions.• 1600 x 1200 maximum resolution Displays a maximum resolution of 1600 x 1200; 1280 x 1024 at 88Hzrefresh rate for eye-pleasing, flicker-free viewing.16 …
  • Angelcare

    ac517

    (64 pages)
    OWNER’S MANUALModel AC417 and AC517 Baby Breathing Monitor, with VideoTABLE OF CONTENTS WARNINGS.......................................................................................................................................................................................................................2SETUP REQUIREMENTS ........................... …

Comments, Questions and Opinions: