Manualios.com

AV Stumpfl SC MASTER 2M Operation & User’s Manual

AV Stumpfl SC MASTER 2M Manual Online:

4.25, 557 votes
AV Stumpfl SC MASTER 2M User Manual
AV Stumpfl SC MASTER 2M User Guide
AV Stumpfl SC MASTER 2M Online Manual

Text of AV Stumpfl SC MASTER 2M User Guide:

  • AV Stumpfl SC MASTER 2M, 148 • Glossary DLC Dynamic Link Code - modern control signal standard, intro- duced by AV Stumpfl in 1994. Ducking ...is a voice-controlled automatic volume reduction of music or the audio program, respectively. HDR Hard disk recording - recording of audio signals on hard disk and processing in the computer. Hucht RSPpro A procedure developed by Hucht for encoding control informa- tion in digital audio signals. This encoding system features particularly high fidelity. MateTrac Widely used control signal standard of Arion, USA. AV Stumpfl has been using this control signal since 1983. Mixdown ..Mix of various sound channels or parallel samples into a stereo sum or

  • AV Stumpfl SC MASTER 2M, SC MASTER 4M Playback of shows • 49 Setting and jumping to spontaneous markers Spontaneous markers can be set while playing back a show. To do so, simply press the YES key. The display will briefly show "Set Marker". After pressing the STOP key  in mode "Show Pause", you can jump to this spontaneous marker by pressing the YES key. The display will show "Marker: Memory". Press PLAY  to continue from this position. A spontaneous marker remains stored even after the SC MASTER is switched off. You can only overwrite it by setting a new spontaneous marker. Extended selection of shows Switch on your unit and

  • AV Stumpfl SC MASTER 2M, SC MASTER 4M Technical Appendix • 143 REMOTE connector 1. Start Show 2 2. Start Show 1 3. + 12 VDC up to + 40 VDC (unstable) Output 4. N. C. 5. +5V DC regulated Output (max. 20mA) 6. GND internal 7. Toggle Input 8. Open Collector Output (IR-Out 2) 9. Analog Input1 (max. 0-5VDC) 10. + 12 VDC up to + 40 VDC (unstable) Output (con- nected to Pin3) 11. External IR Input 12. Open Collector Output (IR-Out 1, DMX-Out) 13. GND internal 14. Analog Input2 (max. 0-5VDC)

  • AV Stumpfl SC MASTER 2M, 66 • Mixer and Audio Routing Note: Selecting routing "4=4" only makes sense for the Pro 4M version. Stereo sound with live comments and Ducking Function For Speaker Support Shows with live comments you should use routing "2=2MDuk" in menu Audio Routing. The same can be achieved by selecting "Stereo 2Æ2 / Mic + Ducking" in Wings and saving the show. Routing "2=2MDuk" operates the card player in stereo. The mixer mixes all sources into a stereo sum to be output at LINE-OUT1. The Ducking Function is active and automatically

  • SC MASTER 4M Mixer and Audio Routing • 61 The next step will be testing the additional audio source. Î Start the connected audio source (e.g. CD player) and turn up the volume via the LINE1 keys on the IR remote control unit. Î With the sound of the additional audio source on, start the card player by pressing the PLAY key . You can now hear a mixture of both audio

  • AV Stumpfl SC MASTER 2M, 142 • Technical Appendix Audio connectors LINE-OUT1 and LINE-OUT2 With a 0dB dB signal (sine wave) generated by Wings Plati- num and converted into an MP3 file, SC MASTER generates a 4.1V peak-peak output level (equal to 2.9V RMS). All internal settings of the SC MASTER are adjusted to 0dB (= card volume 29 and Master Volume 31). LINE-IN1 and LINE-IN2 The maximum input level at Line1 or Line2 is 4.8 V peak-to- peak (= 3.4 V RMS). At this level and a zero dB setting (VL=28, MV=31) there are no audible distortions of the output signal.

  • SC MASTER 4M Introduction • 1 Introduction Control centre and MP3 player SC MASTER series units are MP3 players featuring a su- perordinate Show Control Management for controlling multi- media events. Within the SC Net network, they form the cen- tral control system with a variety of input and output options. Sound and control information is stor

  • AV Stumpfl SC MASTER 2M, SC MASTER 4M The Menu Items • 121 used depends on the "Priority" setting; otherwise the menu setting applies. DLC The DLC control signal is output at CUE-OUT (default setting). DigiLft With a digital audio signal the control signal is read from the left channel. The type of coding, standard or RSPpro, is de- tected automatically. The digital audio signal can be fed in via OPTICAL-IN or, through a coax cable, via CUE-IN. This set- ting allows SC MASTER to be used as DAT extender. When the data signal is timecode, a show from CF card can be synchronized with it.

  • AV Stumpfl SC MASTER 2M, 114 • The Menu Items 4=2Mic (Multi-channel 4 Î 2 / Mic) This routing mixes the four card player channels into a stereo sum, the microphone input is without Ducking Function. In this case, the following components are active: • LINE-IN1 • LINE-IN2 • MIC-IN without Ducking Function • Card player with two full stereo channels (channels 1-4) • Output of the mix of LINE-IN1, LINE-IN2, MIC-IN and card player channels 1 + 2 and 3 + 4 to LINE-OUT1 4=2LnEQ (Multi-channel 4 Î 2 / Equalizer Line1) This routing incorporates an equalizer in the LINE-IN1 signal flow. This setting is very useful when a radio microphone receiver is only able to supply

  • SC MASTER 4M Playback of shows • 45 Playback of shows Presentations - compact layout and comfort- able handling For playing back show or audio projects you need a CF card containing the show data prepared beforehand using Wings Platinum. In principle, the configuration is the same as for programming. However, no PC is required but possibly an additional, e

  • AV Stumpfl SC MASTER 2M, 76 • Mixer and Audio Routing Microphone operation The SC MASTER mixer has a microphone input which can conveniently be used for live comments and moderation. A special feature in this context is the speech-controlled Ducking Function which automatically reduces the volume of music during moderation. Microphone connection The unbalanced microphone input MIC-IN is wired for a 6.3 mono jack connector and is suitable for dynamic and low-level capacitor microphones. There is a compressor and a limiter in the signal path to achieve an optimal dynamic range and good comprehensibility. Microphones with a level of more than 8 mV/Pa (for example Sennheiser K

  • AV Stumpfl SC MASTER 2M, 144 • Technical Appendix AUX connector 1. Aux 1 – a 2. Aux 1 – b, SC Net subaddress /70 3. Aux 2 – a 4. Aux 2 – b, SC Net subaddress /71 5. Aux 3 – a 6. Aux 3 – b, SC Net Sub-subaddress /72 7. Aux 4 – a 8. Aux 4 – b, SC Net subaddress /73 The maximum permissible load for the floating switching contacts is 1 A/24 V! To avoid radiated emissions every con- nector is provided with a 470 pF capacitor wired to internal ground.

  • 28 • Producing a Show Medium The left field contains a list of card directories. One directory always stands for the contents of one CF card, i.e. it is the inverted image of a CF card on the hard disk. generates a new card directory. copies a card directory onto the CF card. deletes a card directory and its contents. The centre field lists the s

  • AV Stumpfl SC MASTER 2M, 78 • Mixer and Audio Routing Settings for the Ducking Function The factory-set values for the Ducking Function are average values which are a good basis for starting you off. However, some fine-tuning is worth taking. After all, finding the optimum setting depends on a number of very individual aspects. Es- sentially, the following items play an important role: • your personal speaking style • the loudness of your voice • the sensitivity of the microphone in use • your personal idea of what the mixture of music and speech should be like The next illustration will show you the volume control of the Ducking Function in the form of an envelo

  • AV Stumpfl SC MASTER 2M, 90 • The Menu Main menu, submenu, and entry menu arrows Let's briefly remember our sheet of paper and the window. Use keys Ï and Ð to move the window up and down, i.e. in verti- cal direction along a menu tree. The ENTER key moves the window to the right, the ESC key to the left, i.e. in horizontal direction along a menu branch. You can step through the various items of the main menu with keys Ï and Ð. The main menu is structured as follows: • "Settings" for loading and saving configurations • "Options" for selecting special features • "Sound" for configuration of card player and mixer func- tions •

  • AV Stumpfl SC MASTER 2M, SC MASTER 4M Technical Appendix • 135 ASCII code Function aSNxxx# Normal show start. The current show is not interrupted. xxx = show number from 1 to 120 aSTxxx# Terminate show start. Only show which does not equal xxx is interrupted. xxx = show number from 1 to 120 aSIxxx# Interrupt show start. The current show is interrupted. xxx = show number from 1 to 120 aSNxxxMyy Normal show start from marker; xxx = show number from 1 to 120, yyy = marker number from 1 to 255 aSIxxxMyy y Interrupt show start from marker. xxx = show number from 1 to 120, yyy = marker number from 1 to 255 a

  • SC MASTER 4M Front and Rear Views • 13 6. LINE-OUT1 connectors, outputs for the first mixer stereo pair (channels 1 + 2) 7. LINE-IN2 connectors, second mixer stereo input for con- nection of external audio sources 8. LINE-IN1 connectors, first mixer stereo input for connec- tion of external audio sources 9. Microphone input as 6.3 mm mono jack, unbalanced 10. Connector

  • AV Stumpfl SC MASTER 2M, SC MASTER 4M The Menu • 87 The Menu Layout of the Menu SC MASTER is a modern, software-controlled unit with a number of functions, which would be very difficult to control via switches and keys only. This is why it has an extensive menu for configuration purposes. Via this menu, SC MASTER is told what to do. In combination with the display and the keys Ï, Ð, ESC and ENTER, the menu is the central input instrument. The menu layout is as follows:

  • AV Stumpfl SC MASTER 2M, 22 • Programming shows Creating a project Before SC MASTER can play back sound, you need to create the corresponding project and copy it onto CF card. In addition to MP3 audio samples, it also requires a show file containing playback information for the samples and, most of the time, also information for the devices to be controlled. In Wings Platinum, project creation is media or object-oriented. This means that you arrange pictures, videos, music and control functions as desired and that the image mix is immedi- ately visible on the virtual screen. All components involved are accurately synchronized. The steps to take, which are ex- plained in more detail

  • AV Stumpfl SC MASTER 2M, 20 • Programming shows 2. Now switch on the computer and the SC MASTER unit. 3. Start Wings Platinum, load a project or create one. A device port "Stumpfl DLC" or "Stumpfl SC Net" using the corresponding interface must be configured in the project. 4. In the Wings Platinum tool bar click on "Enable device control". After the connection has been established, the green PC LED lights up and button "Enable device ports" appears depressed and in colour. If you have problems establishing a connection with the PC, proceed according to the checklist, which you can find in the Online Help of Wings Platinum under "Problems... ".

  • AV Stumpfl SC MASTER 2M, SC MASTER 4M Mixer and Audio Routing • 75 Sound track with separate comment track In Wings Platinum, assign the comments to channels 3 and 4. When playing back from CF Card via routing "4=2sMix", the comment volume (channels 3 and 4) can be adjusted via the MIC keys on the IR remote control unit. The CARD keys can be used to adjust the volume of music (channels 1 and 2). The VOLUME keys can be used to adjust the stereo sum volume, i.e. of comment and music. Zero dB settings There is a mixer setting which causes a signal to be outp

  • AV Stumpfl SC MASTER 2M, SC MASTER 4M Index] • 153 K Keypads, external 105 L Light control via DALI bus 103 LmpFail 103 Load 95 M Master control 106 MateTrac 119 Menu Chart 93 Layout 87 Operation 89 Microphone input, menus 109 Microphone operation 76 MIDI timecode 103 MIDI-Out 103 Mixer and Audio Routing 53 Mixer operation 58 MP3 audio data compression 25 MsgDely (Message Delay) 101 Music reduction 107 Mute Function 62 N NetAdrs (SCNet address) 98 O OC 16 out Module 105 OC Analog Module 104 Open-Collector Module 98

  • AV Stumpfl SC MASTER 2M, 132 • Update of operating software Update of operating soft- ware Updating Your SC MASTER control unit, which includes a processor with operating software, can very simply be kept up-to-date by loading new software. ÎDownload an Update File from the Internet. It is available at www.stumpfl.com under "Download" / "Firmware Updates". If you do not have access to the Internet, turn to our Support for help. Î Connect the RS232-IN connector of the SC MASTER

  • AV Stumpfl SC MASTER 2M, 96 • The Menu Items SCNBaud AutoBd ContShw CS=ON TrayStP TS=1 PDC Mode PDC=OFF Display/Brightness Br=12 Display/Message-Delay MD=80 Display/TimeDsp TD=OFF Display/ProjDsp PD=OFF IRRecve IR=ON RMT-Out AUX-Out HighLgt Program DataIO AutoSel 232InBd AutoBd Master/Volume MV=31 Master/Bass MB=0 Master/Treble MT=0 DuckVal DV=10 DuckFad DF=100 AutoDuk/DuckAtk DA=5 AutoDuk/DuckDly DD=5 AutoDuk/DuckSen DS=25 VolCard VC=31 VolMic VM=0 BassMic BM=0

  • 70 • Mixer and Audio Routing the MIC keys on the remote control unit, respectively. Ducking can only be performed manually by pressing the NO key. With this routing, the microphone input is inactive. MASTER VOLUME control and equalizer affect all audio sources likewise.

  • AV Stumpfl SC MASTER 2M, iv • Contents Save ............................................................................. 95 Factory ......................................................................... 95 Options.............................................................................. 98 AuxAdrs (Auxiliary address) ......................................... 98 RSOAdrs (RS-Out address) ......................................... 98 SCNet (SCNet Communication)................................... 98 ContShw (Continue Show) ....................

  • AV Stumpfl SC MASTER 2M, SC MASTER 4M Front and Rear Views • 15 4. Ducking control; specifies to what extent the volume of music is to be reduced when the presenter starts talking. 5. Volume control for the master level, i.e. it takes effect on the mix of all audio sources 6. Volume control (and Mute keys) for the audio sources Line1, Line2, microphone and card player; they take effect on the corresponding audio source only. Further informa- tion can be found under Mixer operation on page 58 7. Skip /Skip: For selecting a piece of music when no show is running; selection of jump markers within a par- ticular

Related Products and Documents (MP3 Player):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Tripp Lite B020-008-17 Owner's manual tripp-lite/b020-008-17-LG1.pdf 22 Nov 2023 112 4.66 Mb
2 Zanussi ZI 9121 FA Instruction booklet zanussi/zi-9121-fa-673.pdf 25 Mar 2023 20 0.28 Mb
3 RCA D52W23 Specification sheet rca/d52w23-6MK.pdf 21 Oct 2022 2 0.45 Mb
4 Philips 22PFL5604H - annexe 1 Manual  philips/22pfl5604h-annexe-1-TE6.pdf 31 Jul 2022 1 9.69 Mb
5 AudioSource Amp Seven T Owner's manual audiosource/amp-seven-t-7Y1.pdf 10 Mar 2023 4 0.11 Mb
6 Weider WEBE14080 Operation & user’s manual weider/webe14080-9F3.pdf 01 Nov 2022 16 0.37 Mb

Similar Resources:

  • Philips

    AZ1138

    (40 pages)
    Handling Chip Components and Safety ..........................1 - 1Technical Specification & Measurement Setup ...............2 - 1Service Measurement......................................................2 - 2Connections and controls ................................................3 - 1Instructions for Use .............................................3 - …
  • Nu Inc

    DOLPHINtouch

    (7 pages)
    www.nu-global.com.twDOLPHIN TOUCH ENGLISHThe First Waterproof Curved Touch pads Music PlayerUser Manual2F.-6, No.5, Alley 22, Lane 513, Rueiguang Rd., Neihu District, Taipei City 114, TaiwanPhone: 886-2-26591768 Ext. 114Website: …
  • Philips

    AZ2055

    (8 pages)
    English CONTROLSDIGITAL TUNERTuning to radio stations1Press y to on, then press SOURCE to selectTUNER.– TU is displayed briefly and then the radio stationfrequency, waveband and, if programmed, apreset number are shown. (See 4)2 Press BAND once or more to select yourwaveband.3 Press and hold ∞ or § until the frequency in thedisplay starts running.™ Th …
  • Philips

    AZ1836

    (19 pages)
    Version 1.2AZ1836© 3141 785 31512MP3 CD Soundmachineall versionsPublished by LX 0714 Service Audio Subject to modification© Copyright 2006 Philips Consumer Electronics B.V. Eindhoven, The NetherlandsAll rights reserved. No part of this publication may be reproduced, stored in a retrievalsystem or transmitted, in any form or by any means, electronic, mec …
  • Philips

    AZ1575

    (2 pages)
    CD Sound Machine• 14-key remote control• Two-way speaker system• Bass reflex speaker system• Incredible surround• Digital DBB+• 3 band digital equalizer• Jog control• 20-track programmable• CD rewritable compatibleAZ1575AZ1575 …
  • Philips

    EXP 21

    (2 pages)
    EXP 211EXP 211Portable MP3-CD playerMagic ESP• More than 10 hours of music on one MP3 CD• 100 seconds Magic electronic skip protection• 20-hour playback with 2 x AA Alkaline batteries (MP3-CD)• Large and easy to read display•CD, CD-Recordable and CD-Rewritable compatible• Playback of MP3 (32-320 Kbps) and variable bitrate• Digital dynamic bass …

Comments, Questions and Opinions: