Acura Embedded AcuHawk-EX Operation & User’s Manual

Text of Acura Embedded AcuHawk-EX User Guide:

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 83 Figure 10-2 Add a User  Modify a User Steps: 1. Left-click to select the user from the list and click . 2. Modify the User Name, Level or Password. 3. In the Basic Permission field and Camera Configuration field, you can check or uncheck the permissions. 4. Click to finish the user modification.

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 8 Chapter 1 Introduction 1.1 System Requirement System requirement of web browser accessing is as follows: Operating System: Microsoft Windows XP SP1 and above version / Win7 / Win8 / Server 2003 / Server 2008 32bits CPU: Intel Pentium IV 3.0 GHz or higher RAM: 1G or higher Display: 1024×768 resolution or higher Web Browser: Internet Explorer 7.0 and above version 1.2 Features The high-definition network zoom camera is an embedded surveillance product. It combines the functions of analog camera and network video server. With embedded operating system

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 6 6.3.8 Configuring FTP Settings .................................................................................................... 44 6.3.9 Configuring ..............................................................................................UPnP™Settings 45 6.3.10 Configuring NAT (Network Address Translation) Settings .............................................. 46 6.3.11 Configuring Email Settings .....................................................

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 71 Configuration > Advanced Configuration> Storage > Record Schedule Figure 7-6 Recording Schedule Interface 2. Check the checkbox of Enable Record Schedule to enable scheduled recording. 3. Set the record parameters of the zoom camera. Figure 7-7 Record Parameters  Pre-record: The time you set to start recording before the scheduled time or the event. For example, if an alarm triggers recording at 10:00, and the pre- record time is set as 5 seconds, the zoom camera starts to record at 9:59:5

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 28 Figure 5-5 Calling a Preset 5.4.3 Setting / Calling a Patrol Purpose: A patrol is a memorized series of preset function. It can be configured and called on the patrol settings interface. There are up to 8 patrols for customizing. A patrol can be configured with 32 presets. Before you start: Please make sure that the presets you want to add into a patrol have been defined.  Setting a Patrol: Steps: 1. In the PTZ control panel, click to enter the patrol settings interface. 2. Select a patrol numb

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 26  Setting the image quality of the live video in Section 6.1 Configuring Local Parameters and Section 6.4.1 Configuring Video Settings.   Setting the OSD text on live video in Section 6.5.1 Configuring OSD Settings.  5.3 Recording and Capturing Pictures Manually In the live view interface, click on the toolbar to capture the live pictures or click to record the live video. The local saving paths of the captured pictures and clips can be set in the Configuration > Local Configuration interface.

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 78 types as shown in Figure 8-6. Figure 8-6 Video Types Task 2: To download the video files Steps: 1. Click on the playback interface. The pop-up menu is shown in Figure 8-7. All the video files are listed. Figure 8-7 Video Downloading interface 2. Check the checkbox on the left side of the video files that you need to download. 3. Click to download the video files. Notes:  The progress ratio displays the downloading ratio of the video

• User Manual of Network Zoom camera 21 Figure 4-2 Download and Install Plug-in Figure 4-3 Install Plug-in (1) Figure 4-4 Install Plug-in (2)

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 66 Figure 6-44 Linkage Method 6.6.4 Configuring Alarm Output Steps: 1. Enter the Alarm Output Settings interface: Configuration>Advanced Configuration> Events > Alarm Output 2. Select one alarm output channel in the Alarm Output drop-down list. 3. Set a name in for the alarm output (optional). 4. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or Manual. The delay time refers to the time duration that the alarm output remains in effect after alarm occurs.

• User Manual of Network Zoom camera 35 (2) Click to set the system time from the pop-up calendar. (3) Click to save the settings. Note: You can also check the Sync with local time checkbox to synchronize the time of the zoom camera with the time of your computer. Figure 6-4 Time Sync Manually  Select the Time Zone 

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 42 4. Click to save and finish the settings. 6.3.6 Configuring 802.1X Settings Purpose: The zoom camera supports IEEE 802.1X standard. IEEE 802.1X is a port-based network access control. It enhances the security level of the LAN. When devices connect to this network with IEEE 802.1X standard, the authentication is needed. If the authentication fails, the devices cannot connect to the network. The protected LAN with 802.1X standard is shown as follows: Network Dome Authenticator etwork Switch Net Authentication Server PC PC RADIUS Server Figure 6-15 P

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 37 2. Configure the NIC settings, including the IPv4(IPv6) Address, IPv4(IPv6) Subnet Mask and IPv4(IPv6) Default Gateway. 3. Click to save the above settings. Notes:  If the DHCP server is available, you can check to automatically obtain an IP address and other network settings from that server.    The valid value range of Maximum Transmission Unit(MTU) is 100 ~ 1500. The default value is 1500.    The Multicast sends a stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address.

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 54 This function is used to limit the minimum focus distance. The value can be set to 10cm, 30cm, 1m, 1.5m, 3m, 6m and INFINITE. Note: The minimum focus value varies depending on the models of camera. Day/Night Switch The Day/Night Switch mode can be set to Auto, Day and Night.  Auto: In Auto mode, the day mode and night mode can switch automatically according to the light condition of environment. The switching sensitivity can be set to Low, Normal, High. Figure 6-30 Auto Mode Sensitivity  Day: In Day mode, the camera displays color image. It is used for normal lighting con

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 23 Figure 4-7 iVMS-4200 Live View Interface Notes:  If you use third party VMS software, please contact technical support of our branch for camera firmware.    For detailed information about client software of our company, please refer to the user manual of the software. This manual mainly introduces accessing to the network zoom camera by web browser. 

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 74 (3) Check the checkbox and click to copy settings of this day to the whole week. You can also check any of the checkboxes before the date and click . (4) Click to save the settings and exit the Edit Record Schedule interface. 6. Click to save the settings. 7.3 Configuring Snapshot Settings Purpose: You can configure the scheduled snapshot and event-triggered snapshot. You can upload the captured pictures to a FTP server. Basic Settings Steps: 1. Enter the Snapshot Settings interface: Configuration > Advanced Configuration > Events > Snapshot 2. Check the E

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 63 6.6.7 Configuring Email Settings to set the Email parameters.  Upload to FTP  Capture the image when an alarm is triggered and upload the picture to a FTP server. Note: You need a FTP server and set FTP parameters first. Refer to Section 6.3.5 Configuring FTP Settings for setting FTP parameters.  Trigger Channel  Record a video when an event occurs. Note: You have to set the recording schedule to realize this function. Please refer to Section 7.2 Configuring Recording Schedule for settings the recording schedule.  Trigger Alarm Output Trigger one or more external alarm outputs when an event occurs.

• User Manual of Network Zoom camera 87 Figure 10-9 Device Information 10.6 Maintenance 10.6.1 Rebooting the Zoom Camera Steps: 1. Enter the Maintenance interface: Configuration > Basic Configuration> System > Maintenance Or Configuration > Advanced Configuration> S

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 47 Figure 6-22 Email Settings 2. Configure the following settings: Sender: The name of the email sender. Sender’sAddress: The email address of the sender. SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com). SMTP Port: The SMTP port. The default TCP/IP port for SMTP is 25. Enable SSL: Check the checkbox to enable SSL if it is required by the SMTP server. Attached Image: Check the checkbox

• User Manual of Network Zoom camera 62 Figure 6-40 Arming Time Schedule 3. Set the Alarm Actions for Motion Detection. Purpose: You can specify the linkage method when an event occurs. The following contents are about how to configure the different types of linkage method. F

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 72 zoom camera model.  Overwrite: If you enable his function and the HDD is full, the new record files overwrite the oldest record files automatically.    Recording Stream: You can set the recording stream as Main Stream or Sub Steam.   4. Click to edit the record schedule. Figure 7-8 Record Schedule 5. Choose the day to set the record schedule. (1) Set all-day record or segment record:  If you want to configure the all-day recording, please check the All Day checkbox.    If you want to record in different

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 38 3. Click to save the settings. 6.3.3 Configuring PPPoE Settings Purpose: If you have no router but only a modem, you can use Point-to-Point Protocol over Ethernet (PPPoE) function. Steps: 1. Enter the PPPoE Settings interface: Configuration >Advanced Configuration > Network > PPPoE Figure 6-9 PPPoE Settings 2. Check the Enable PPPoE checkbox to enable this feature. 3. Enter User Name, Password, and Confirm password for PPPoE access. Note: The User Name and Password should be assigned by your I

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 20 Chapter 4 Access to the Network Zoom Camera 4.1 Accessing by Web Browsers Steps: 1. Open the web browser. 2. In the address field, input the IP address of the network zoom camera, e.g., 192.0.0.64 and press the Enter key to enter the login interface. 3. Input the user name and password and click . Note: The default user name is admin and password is 12345. Figure 4-1 Login Interface 4. Install the plug-in before viewing the live

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 86 10.4 Configuring IP Address Filter With this function on, the camera allows certain IP addresses whether to log in or not. Filter Type Description Forbid the IP addresses added in Forbidden the IP Address Filter interface to log in. Allow only the IP addresses Allowed added in the IP Address Filter interface to log in. Figure 10-8 IP Address Filter 10.5 Viewing Device Information Enter the Device Information interface: Configuration > Basic Configuration> System > Device Informat

• User Manual of Network Zoom camera 67 Figure 6-45 Alarm Output Settings 6.6.5 Handling Exception The exception type can be HDD full, HDD error, network disconnected, IP address conflicted and illegal login to the zoom cameras. Steps: 1. Enter the Exception Settings interface: Confi

• User Manual of Network Zoom camera 75 details to configure FTP parameters. 2) Check checkbox in Motion Detection Settings or Alarm Input interface. Please refer to Step 3 Set the Alarm Actions Taken for Motion Detection in Section 6.6.1 Configuring Motion Detection, or Step 4 Configuring External Alarm Input in Section 6.6.1 Configuring Motion Detection. 3) Check the

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 64 2. Check Enable Tamper-proof checkbox to enable the tamper-proof detection. 3. Set the tamper-proof area. Refer to Step 1 Set the Motion Detection Area in Section 6.6.1 Configuring Motion Detection. 4. Click to edit the arming schedule for tamper-proof. The arming schedule configuration is the same as the setting of the arming schedule for motion detection. Refer to Step 2 Set the Arming Schedule for Motion Detection in Section 6.6.1 Configuring Motion Detection. 5. Check the checkbox to select the linkage method taken for the tamper-proof. Notify surveillance center, send

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 48 pictures. Authentication (optional): If your email server requires authentication, check this checkbox to use authentication to log in to this server and enter the login user name and password. Receiver: Select the receiver to which the email is sent. Up to 2 receivers can be configured. Receiver: The name of the user to be notified. Receiver’sAddress: The email address of user to be notified. (Optional: click Test to make sure that the email server can s

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 41 camera can send the alarm event and exception messages to the surveillance center. Note: The SNMP version you select should be the same as that of the SNMP software. Steps: 1. Enter the SNMP Settings interface: Configuration > Advanced Configuration > Network > SNMP Figure 6-14 SNMP Settings 2. Check the corresponding version checkbox ( , , ) to enable the feature. 3. Configure the SNMP set

• Acura Embedded AcuHawk-EX, User Manual of Network Zoom camera 52 Figure 6-26 Display Settings Image Adjustment  Brightness This feature is used to adjust brightness of the image. The value ranges from 0 to 100.  Contrast This feature enhances the difference in color and light between parts of an image. The value ranges from 0 to 100.  Saturation This feature is used to adjust color saturation of the image. The value ranges from 0 to 100.  Sharpness Sharpness function enhances the detail of the image by sharpening the edges in the image. The value ran

Related Products and Documents (Security Camera):

Comparable Devices:

Similar Resources:

• Toshiba IK-WB21A - IP Network PTZ Camera (16 pages) For information on the latest products and peripheral devices, refer tothe following Web page.■ http://www.netcam.toshiba.comThe above URL is subject to change without prior notice. If the URLchanges, refer to the Toshiba website(http://www.toshiba.com).NETWORK CAMERAModel: IK-WB21ASafety PrecautionsSee the instruction manual (PDF file) contained in the CD …

• Bosch VDC-445V03-20S (8 pages) CCTV | VDM‑3x5 and VDC‑4x5 Series Dome Cameras FlexiDome VF and XT+The FlexiDomeVF and FlexiDomeXT+ series of domecameras are an excellent solution for virtually any indooror outdoor application. The cast aluminum housing,polycarbonate dome and hardened inner liner of theFlexiDomeXT+ version can withstand the equivalent of120 lbs of force. The FlexiDomeV …

• Vivotek FD9187-HT-A (441 pages) User’s Manual5MP • IP66 (outdoor) • IK10 • Day & Night • Smart Motion Detection (H/T) • Smart VCA Remote Focus • WDR Pro II • Smart Stream III • SNV II • 50M Smart IR • Shock Detection Fixed Dome Network CameraFD9187-HT-AFD9387-HTV-A, FD9387-EHTV-ARev. 1.0 …

• SVAT CV1002 (2 pages) Model #:CVP1002DVRwww.svat.comSVAT ELECTRONICSnow you can see• Easy do-it-yourself setup!• Supports video/audio recording and playback operations• 2.5" TFT-LCD display• Records directly onto the CF Card or 20GB HDD(HDD sold seperately)• Transferring data from the DVR to your computer is simple• Detects motion and can be set to scheduled reco …

• Okina SHD4-7540DN-BP (2 pages) SHD4-7540DN-B(W)_SSD4-7420-B(W) _rev03112008 Operational Manual Day & Night Color Camera  1/3" Sony Super HAD CCD  540 TV Lines, HQ1 DSP SHD4-7540DN-B(W)  420 TV Lines SSD4-7420-B(W)  3.6mm Standard Lens  0.5 Lux @ F2.0 SHD4-7540DN-B(W)  0.3 Lux @ F2.0 SSD4-7420-B(W)  Auto White Balance & Auto Ga …

• TruVision M Series (43 pages) P/N 1063-ALL • REV A • ISS 28SEP2021TruVision M Series Varifocal IP Turret Cameras EN Installation GuideDE InstallationsanleitungES Guía de instalaciónFI AsennusohjeFR Guide d’installationIT Guida all’installaziowneNL InstallatiegidsPL Instrukcja instalacjiPT Guia de instalaçãoRU Руководствопоуста� …

Comments, Questions and Opinions: