Amped Wireless RTA15 Operation & User’s Manual

Text of Amped Wireless RTA15 User Guide:

• Amped Wireless RTA15, RTA15 USER’S GUIDE 16 If there was a problem with the Automatic Configuration, the wizard will notify you of the issue. If you continue to have problems, contact our support department at 888-573-8820. If the Automatic configuration was successful, you will be directed to a Configuration Successful page. Click Next to continue.

• Amped Wireless RTA15, RTA15 USER’S GUIDE 94 - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution and Safety Notices: Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Avoid use of this product near water or during an electrical storm as there may be a remote risk of ele

• Amped Wireless RTA15, RTA15 USER’S GUIDE 49 Smart Features: User Access (IP Address Filtering) User Access (IP Filtering) is similar to User Access (MAC filtering) except that the Router uses the local IP address to filter the specific data from the specified network protocol. For example, if you chose to block TCP data packets from a specific computer, you would need to figure out what that device's IP address is and select TCP from the Protocol drop down menu. If you are not sure which Protocol to filter, select "Both" as your Protocol selection.

• Amped Wireless RTA15, RTA15 USER’S GUIDE 69 Management: Upgrade Firmware Amped Wireless continuously updates the firmware for all products in an effort to constantly improve our products and their user experiences. Check the Downloads page for your product frequently to see if there are any updates. The firmware update is downloaded as a zip file from the Support Webpage link on the left. You will need to have an unzipping program to open the file. Inside the file will be a text document with details on the current firmware release and instructions on how to upgrade the firmware. To manually upgrade your firmware: a. Download the file from the www.ampedwireless.com/support website and

• RTA15 USER’S GUIDE 47 Smart Features: Block Websites To block a website, you must first enable URL filtering. After it has been enabled, you can begin adding as many websites as you wish into the URL Address field. Note: If you wish to block www.google.com, simply type in "google" and the Router will block all websites with the tex

• Amped Wireless RTA15, RTA15 USER’S GUIDE 68 Management: System Logs The System Log is useful for viewing the activity and history of your Router. The System Log is also used by Amped Wireless technicians to help troubleshoot your router when needed. It is recommended that you enable all logs in the event that troubleshooting is required. All log entries will be deleted each time the Router reboots or is powered off.

• Amped Wireless RTA15, RTA15 USER’S GUIDE 63 MANAGEMENT FEATURES The Management Features on the Router allows you to view the status of the system, your Internet connection, wireless network and local area network. The Network Statistics page provides detailed traffic data for each connection type.

• Amped Wireless RTA15, RTA15 USER’S GUIDE 96 Déclaration d’Industrie Canada : Cet appareil numérique de classe B est conforme aux réglementations RSS- 210 et ICES-003 d’Industrie Canada. Le fonctionnement de cet appareil est sujet aux deux conditions suivantes: (1) Cet appareil ne peut pas causer de brouillage préjudiciable (2) Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un dysfonctionnement. Déclaration d’exposition à la radiation : Cet équipement respecte les limites d’exposition aux rayonnements IC définies pour un environnement non contrôlé. Cet équipement doit être installé et mis en marche à une distanc

• RTA15 USER’S GUIDE 5 LED Indicators (From bottom to top) Power: Indicates when the Router is powered on. The LED will remain on. WPS: Wi-Fi Protected Setup activity. When the WPS mode is activated the Power LED blinks as it awaits a connection. 5.0GHz Wireless Activity: Blinks rapidly when wireless data traffic is transmitted or received ove

• Amped Wireless RTA15, RTA15 USER’S GUIDE 73 DEFAULT SETTINGS The default settings for your Router are listed here. If for some reason you need to return your Router back to default settings, hold down the Reset button on the back panel for 10 seconds. The Router will reset back to factory settings as listed below: IP Address: 192.168.3.1 Web Menu Access: http://setup.ampedwireless.com Login: admin Password: admin 2.4GHz Wireless SSID: Amped_RTA15_2.4 Wireless Security Key (WPA/WPA2 Mixed Mode): wireless 5.0GHz Wireless SSID: Amped_RTA15_5.0 Wireless Security Key (WPA/WPA2 Mixed Mode): wire

• Amped Wireless RTA15, RTA15 USER’S GUIDE 91 unenforceable, its remaining provisions shall remain in effect. All costs of shipping the product to Amped Wireless shall be borne solely by the purchaser. Limitations: IN NO EVENT SHALL AMPED WIRELESS’ (NEWO CORPORATION’S) LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, ACCESSORIES OR ITS DOCUMENTATION. The Amped Wireless Limited Warranty does not apply if: (a) the product assembly has been opened or damaged, (b) the product or its s

• Amped Wireless RTA15, RTA15 USER’S GUIDE 92 www.ampedwirleess.com/support to fill out a Return Authorization (RMA) form and obtain a Return Authorization (RMA) number. A dated proof of original purchase and the RMA number is required to process warranty claims. You are responsible for properly packaging and shipping the product at your cost and risk to Amped Wireless. The bearer of cost related to shipping repaired or replaced product back to the purchaser will be at the sole discretion of Amped Wireless

• RTA15 USER’S GUIDE 21 Wireless Network ID (SSID): The name of your 5.0GHz wireless network. Channel Number: Wi-Fi networks operate on specific wireless channels. Some network channels may have more interference than others. If your performance is unstable, try a different channel number. If you are using a repeater with this network, it is recommended you

• Amped Wireless RTA15, RTA15 USER’S GUIDE 1 CONTENTS INTRODUCTION ........................................................... 3 GETTING STARTED ....................................................... 4 Package Contents ........................................................... 4 LED Indicators ................................................................. 5 Back Panel Description ................................................... 6 BASIC SETUP GUIDE ..................................................... 7 5.0GHz WI-FI SETTINGS .............................................. 20 Basic Settings (5.0GHz) ..........................................

• Amped Wireless RTA15, RTA15 USER’S GUIDE 35 2.4GHz Wi-Fi Settings: Access Schedule (2.4GHz) Access Schedules will enable or disable your 2.4GHz wireless access at a set time based on your predefined schedule. This feature is often used for restricting access to all users (such as children, employees, guests) during specific times of the day for parental control or security reasons. a. Enable Access Schedule b. Select which days you wish for your 2.4GHz Wi-Fi to be available c. Select the time frame during that day that you wish for your 2.4GHz Wi-Fi to be available d. Apply Changes Note: Make

• Amped Wireless RTA15, RTA15 USER’S GUIDE 34 2.4GHz Wi-Fi Settings: Wireless Coverage Controls (2.4GHz) Adjust the output power of the Router to control the coverage distance of your 2.4GHz wireless network. For a smaller coverage area, you can select a lower output power. For the maximum wireless coverage, select the 100% selection.

• RTA15 USER’S GUIDE 64 Management: System Status The System Status provides you with a snapshot of your Router’s current connections and settings. The System Information section provides you with the router’s firmware version and build. This is used to help our support department determine what firmware version your device is running.

• Amped Wireless RTA15, RTA15 USER’S GUIDE 65 Management: Network Statistics Network statistics shows the data activity for each connection type on the Router (Internet, Wireless and Wired). The Wireless Connection statistics shows all data activity for both the 2.4GHz and 5.0GHz wireless networks separately. The Wired Connection statistics shows all data activity for all users physically connected to the wired ports on the Router. The Internet Connection statistics shows the data activity for all upload and download data over your Inter

• Amped Wireless RTA15, RTA15 USER’S GUIDE 17 Configure your Wireless and Security Settings 5.0GHz Wireless Settings: The default SSID of the 5GHz wireless network is “Amped_RTA15_5.0” To change it, enter a new name in the SSID field. Users connecting wirelessly to the Router will use this ID to identify your wireless network. The default Security Key (WPA/WPA2) for your 5GHz wireless network is “wireless”. To change it, enter a new key in the Security Key field. The key must be 8-characters minimum. Click Next to apply your settings.

• Amped Wireless RTA15, RTA15 USER’S GUIDE 67 Management: System Clock Maintain the internal clock for the Router by syncing with your computer’s time. Your system clock settings need to be accurate in order for logs and wireless access schedules to work correctly.

• Amped Wireless RTA15, RTA15 USER’S GUIDE 93 Regulatory Information FCC Statement and Declaration: Amped Wireless declares that this device complies with Part 15 of the FCC Rules and Regulations. Operation of this device is subject to the following two (2) conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

• Amped Wireless RTA15, RTA15 USER’S GUIDE 86 Troubleshooting: USB Storage Issues I cannot access my USB storage device after I plug it into the router. Follow the instructions below for your operating system. Windows 7 and Vista To access the drive from your Windows desktop: Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to Map the Network Drive. a. Click the Start button. b. Click Computer. c. On the Computer

• Amped Wireless RTA15, RTA15 USER’S GUIDE 44 Network Settings: Advanced Settings These settings apply to the Local Network and your Internet Connection Network. If you are not familiar with these settings, please refer to a network administrator to avoid putting your network at risk. Enable uPnP: Universal Plug and Play is a network feature that allows uPnP enabled devices to “just work” with each other when connected to the same network. UPnP can work across different network media, such as an Ethernet connection or wireless connection. With UPnP enabled, network devices may change security settings within th

• Amped Wireless RTA15, RTA15 USER’S GUIDE 52 Windows XP To access the drive from your Windows desktop: Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to Map the Network Drive. a. Click the Start button. b. Click My Computer. c. Click on My Network Places and locate the drive named AMPED_USB. To Map the network drive: a. Click the Start button. b. Right Click My Computer and select Map Network Drive. c. Select a drive letter (any), then enter in the folder field: \\AMPED_USB\public\ or

• RTA15 USER’S GUIDE 3 INTRODUCTION Thank you for purchasing this Amped Wireless product. At Amped Wireless we strive to provide you with the highest quality products through innovation and advanced technology. We pride ourselves on delivering products that outperform the competition and go beyond your expectations. If you have any questions please feel free to contact us.

• RTA15 USER’S GUIDE 38 Network Settings: IPv6 Local Network (LAN) These settings are for your IPv6 local network only and do not apply to your Internet / ISP connection. The LAN IPv6 Link- Local Address is the IPv6 Address that you use to access the web-based management interface. If you change the LAN IPv6 Address here, you may need to adjust your PC’s network set

• Amped Wireless RTA15, RTA15 USER’S GUIDE 24 5.0GHz Wi-Fi Settings: Advanced Settings (5.0GHz) Advanced Wireless Settings should only be adjusted by technically advanced users. It is not recommended that novice users adjust these settings to avoid degrading wireless performance. Fragment Threshold: The default and recommended setting is at 2346, meaning the Router will never fragment any frames that it sends to wireless users. RTS Threshold: Adjusts the size of RTS data packets. Lower values reduce throughput, but allow the system to recover quicker from interfer

• Amped Wireless RTA15, RTA15 USER’S GUIDE 18 2.4GHz Wireless Settings: The default SSID of the 2.4GHz wireless network is “Amped_RTA15_2.4” To change it, enter a new name in the SSID field. Users connecting wirelessly to the Router will use this ID to identify your wireless network. The default Security Key (WPA/WPA2) for your 2.4GHz wireless network is “wireless”. To change it, enter a new key in the Security Key field. The key must be 8-characters minimum. Click Next to apply your settings. The Router will reboot. This process may take up to 1 minute. The page will automatically reload after

More Instructions:

Amped Wireless RTA15 Setup manual 05-08-2023 2

DOWNLOAD

Related Products and Documents (Network Router):

Comparable Devices:

Similar Resources:

• TP-Link TL-WR1043ND - Ultimate Wireless N Gigabit Router (2 pages) Hardware Connection1Quick Installation Guide300Mbps Wireless N Gigabit RouterMODEL NO. TL-WR1043NDConguration by Setup Wizard27106504272 REV2.0.0Package ContentsResource CDEthernet CablePower AdapterThe Easy Setup Assistant is not supported in Linux or Mac OS. If you are running Linux /Mac or without CD-ROM, please refer to Appendix 2.2Click START and …

• SPT 15-AU50H (13 pages) Speed Dome Camera Controller Operation Manual15-AU50H / 15-AU50E Please read this operation manual before using this device and use the device properly.Also, please keep this manual with care to ensure easy access at any time.VER: 1.1 …

• Fujitsu MESSHU RT500 (55 pages) 1 Fujitsu MESSHU RT500 FAQ V1.4.1 MESSHU product APP ICON Description MESSHU Router Set Router connection and network management MESSHU Drive Remote ( not in wifi range ) access to USB Storage (MESSHU cloud space ) data on the Router …

• HP ProCurve Secure Router 7203 dl (2 pages) Product End-of-Life Disassembly InstructionsProduct Category: Networking Equipment Marketing Name / Model [List multiple models if applicable.] Procurve Secure Router 7203dl (J8753A) Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to rem …

• Emerson 1420 (20 pages) ¢00825-0100-4420[¤Quick Installation Guide00825-0100-4420, Rev DAJuly 20091420 Wireless GatewayStep 1: Initial Connection for ConfigurationStep 2: Basic Security and Time ConfigurationStep 3: Basic Ethernet or Serial ConfigurationStep 4: Mount and Connect the GatewayEC Declaration of ConformityStartEnd1420 Wireless Gateway00825-0100-4420_Rev_DA.fm Page 1 …

• D-Link DFL-210 - NetDefend - Security Appliance (495 pages) Network Security Solution http://www.dlink.com Security Security DFL-210/ 800/1600/ 2500DFL-260/ 860/1660/ 2560(G)Ver 2.26.01Network Security FirewallUser Manual …

Comments, Questions and Opinions: