Manualios.com

Digimerge VBAY3HD Instruction Manual

Digimerge VBAY3HD Manual Online:

3.8, 2235 votes
Digimerge VBAY3HD User Manual
Digimerge VBAY3HD User Guide
Digimerge VBAY3HD Online Manual

Text of Digimerge VBAY3HD User Guide:

  • Digimerge VBAY3HD, Thank you for purchasing this product. Digimerge is committed to providing our customers with a high quality, reliable security solution. This manual refers to the following models: • VBAY3HD • VB300 Digimerge Blade™ (Not Included) For more information on this product, firmware updates, and accessory products, please visit us at: www.digimerge.com CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash symbol within an equilateral triangle is i

  • Digimerge VBAY3HD, iii Important Safeguards In addition to the careful attention devoted to quality standards in the manufacturing process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installation 1. Read and Follow Instructions - All the safety and operating instructions should be read before the video product is operated. Follow al

  • Digimerge VBAY3HD, iv General Precautions Service 13. Servicing - Do not attempt to service this video equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 14. Conditions Requiring Service - Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power supply cord or plug is damaged. • If liquid has been spilled or objects have fall

  • Digimerge VBAY3HD, v General Precautions 1. All warnings and instructions in this manual should be followed. 2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth for cleaning. 3. Do not use this unit in humid or wet places. 4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked. 5. During lightning storms, or when the unit is not used for a long time, disconnect the power supply, antenna, and cables to protect the unit from electrical surge. This e

  • Digimerge VBAY3HD, vi Features • 3 hard drive expansion capability (total of 3 hard drives; not included) • Mirroring capability - duplicates data on your Blade, providing secure data redundancy • Ultra-slim, stackable design • Rugged metal enclosure • Dual exhaust fans for optimal cooling

  • Digimerge VBAY3HD, vii TABLE OF CONTENTS Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Front and Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Stacking The Expansion Bay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Upgrading The Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  • Digimerge VBAY3HD, 1 Getting Started GETTING STARTED The system comes with the following components: EXPANSION BAY POWER ADAPTER INSTRUCTION MANUAL USB CABLE GROUNDING CABLE HDD SCREWS X12 HARD DRIVE SIZE, HARD DRIVE CONFIGURATION MAY VARY BY MODEL. PLEASE REFER TO YOUR PACKAGE FOR SPECIFIC CONTENT DETAILS. CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.

  • Digimerge VBAY3HD, 2 Basic Setup BASIC SETUP 1. UPGRADE THE FIRMWARE a. Upgrade the Blade with the included firmware. See “Upgrading The Firmware” on page 4. The Blade requires a firmware upgrade in order to detect the expansion bay. 2. CONNECT THE GROUNDING CABLE a. Connect the grounding cable from the rear panel of the expansion bay to the rear panel of the Blade. Screw the grounding cable into the Ground port to secure (Figure 1.0). 3. CONNECT THE USB CABLE a. Connect the included USB cable from the rear panel of the expansion bay to the rear panel USB port on the Blade. TIP: The bottom USB port on the

  • Digimerge VBAY3HD, 3 Front and Rear Panel FRONT AND REAR PANEL 1. POWER LED: Glows red when unit powers on. 2. HDD LED Indicators: Flickers green during hard drive activity. 3. Exhaust Fan: Draws hot air out of the expansion bay. Keep the exhaust vents clear. 4. USB Port: Plug in the included USB cable only. The unit will not function properly with longer USB cables. 5. Ground Port: Grounds the unit from electric shock. Always ground the unit to prevent damage. 6. DC12V Power Port: Port for 12V power supply (included). STACKING THE EXPANSION BAY The expansion bay is designed to stack on top or under the Blade. Always check that the st

  • 4 Upgrading The Firmware UPGRADING THE FIRMWARE You must install the latest firmware on the Blade before you can use the expansion bay (version 2.88D38F_B or higher). The firmware can be found *online. Copy the firmware onto your USB memory stick before upgrading. To upgrade the firmware on the Blade: 1. Insert USB memory key with the downloaded firmware into the Blade. 2. Press (M

  • 5 Setting Up The Expansion Bay SETTING UP THE EXPANSION BAY After you upgrade the Blade to the latest firmware, the expansion bay is ready to configure. The expansion bay offers three modes: 1. As a standalone external hard drive that extends the Blade’s storage capacity. 2. As an event-only storage hard drive that records and stores motion-based and event- based recordings. 3. As a mir

  • Digimerge VBAY3HD, 6 Setting Up The Expansion Bay Select Recording Mode 1. Select RECORD from the main menu. Press ENTER on the remote. The Record menu opens. 2. Select BACK UP MODE. Change the value to OFF. Press f(-) or f(+) on the remote to change the values. 3. Press the ESC button on the remote until a window prompts you to save. Select SAVE AND EXIT. Press ENTER on the remote. NOTE: The overwrite option must be enabled so that the system records on a continual loop. Setting The Expansion Bay to Record Events You can set the expansion bay to store events only. For example, you can set the expansion bay to store all Motion events. This allows you to save hard drive space. To configure your e

  • Digimerge VBAY3HD, 7 Setting Up The Expansion Bay Setting Up The Expansion Bay In Mirror Mode You can set the expansion bay to run in Mirror Mode for data redundancy. Running your expansion bay in Mirror Mode means that you will always have a backup of the Blade’s hard drive data. How the Mirroring Sequence Works Mirroring allows data from a primary hard drive to simultaneously copy to a secondary hard drive. If the primary hard drive fails, the secondary hard drive serves as a temporary replacement. For example, when the Blade’s in

  • Digimerge VBAY3HD, 8 Setting Up The Expansion Bay Select Recording Mode 1. Select RECORD from the main menu. Press ENTER on the remote. The Record menu opens. 2. Select BACK UP MODE. Change the value to MIRROR. Press f(-) or f(+) on the remote to change the values. 3. Press the ESC button on the remote until a window prompts you to save. Select SAVE AND EXIT. Press ENTER on the remote. Error Messages You may encounter an error message that reads: "BACKUP HDD NOT CONFIGURED"if you do not set the HDD CONFIGURATION properl

  • 9 Setting Up The Expansion Bay Adding A Hard Drive In Bay #1 Note that the hard drive in Bay #1 is installed upside down, with the underside of the hard drive exposed. To install a hard drive in Bay # 1: 1. Remove the two metal brackets by unscrewing the four silver screws underneath the unit. Bay # 1 Bay # 2 Bay # 3 Figure 2.8 Internal layout of expansion bay with th

  • Digimerge VBAY3HD, 10 Setting Up The Expansion Bay 2. With the hard drive upside down, screw the metal bracket on both sides of the hard drive with the included hard drive screws. 3. With the hard drive upside down, connect the SATA power and SATA data cables. The cables only connect one way. Do not force in the cables. 4. Gently lower the hard drive into the bay. With your hand clasping the hard drive, flip the unit over. Tighten the four bracket screws to secure mounting bracket in place. Figure 3.0 Install the two mounting brackets on the side of the hard drive. NOTE: The screws that mount the hard drive to the bracket are larger. The screws that mount

  • 11 Setting Up The Expansion Bay Removing A Hard Drive In Bay #1 1. Unscrew the four silver screws on the bottom of the unit. 2. Gently lift the hard drive out of the bay, and disconnect the SATA power and SATA data cable from the hard drive. 3. Remove the screws securing the mounting brackets. Figure 3.3 Lift the hard drive out of the bay, and carefully disconnect the SATA p

  • Digimerge VBAY3HD, 12 Setting Up The Expansion Bay Adding A Hard Drive To Bay #2 & 3 1. Plug in the SATA power connector and SATA data connector into the hard drive (Figure 3.5). Do not force in the connectors. The connectors are designed to go in one way only. 2. Lower the hard drive into the bay. 3. Clasp your hand on the hard drive and the casing (Figure 3.6). 4. Flip the unit upside down while clasping the hard drive with your hands (Figure 3.7). 5. Screw in the four corresponding hard drive screws underneath the unit to secure. Removing A Hard Drive from Bay #2 & 3 1. Fli

  • Digimerge VBAY3HD, 13 Appendix A: VBAY3HD Specifications APPENDIX A: VBAY3HD SPECIFICATIONS Display LED Display Red (Power), Green (HDD 1 - 3) Hard Drive Maximum Capacity Three 3.5‘‘ SATA HDD Minimum Rotational Speed 7200 RPM Seek Time Faster than 10ms (average) Connections USB 2.0 Electrical Power Source 12 V/ 5A Power Consumption with 1 HD installed Start 12V @ 1.7A (peak) Read/Write 12V @ 0.8A (typical) Power Consumption with 2 HDs installed Start 12V @ 3.0A (peak) Read/Write 12V @ 1.2A (typical) Power Consum

Related Products and Documents (Storage):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Generac Power Systems Air-cooled Generators Installation manual generac-power-systems/air-cooled-generators-9O1.pdf 09 Dec 2023 105 4.45 Mb
2 Coby TF-DVD7333 Specifications coby/tf-dvd7333-F12.pdf 01 Feb 2024 1 0.22 Mb
3 Epson PowerLite Home 20 Quick setup manual epson/powerlite-home-20-D92.pdf 15 Aug 2022 6 1.09 Mb
4 Platinum CCTV DVR-3600 Operation & user’s manual platinum-cctv/dvr-3600-5AA.pdf 17 Jan 2023 34
5 HP b2600 User reference hp/b2600-CQ8.pdf 19 Jul 2023 84
6 Philips Showline MCP9360I Specifications philips/showline-mcp9360i-64S.pdf 13 Nov 2022 2

Similar Resources:

  • Cisco

    UCS Invicta C3124SA

    (40 pages)
    Cisco Systems, Inc.www.cisco.comCisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at www.cisco.com/go/offices.Cisco UCS Invicta C3124SA Appliance Installation GuideVersion 5.0.0August 27, 2014Text Part Number: …
  • Coolmax

    HD-250B-U2

    (1 pages)
    HD-250-U2 SERIES (Aluminum) USER MANUAL I. Features • USB 2.0 Interface, support high speed data transfer rates up to 480 Mbps (Backward compatible with USB 1.1 specifications) • Hot swappable and true Plug-n-Play • Fully compatible with 2.5” SATA I and SATA II hard disk • Suitable for Notebook and Desktop • Insulating designed PCB • Al …
  • Philips

    FM01FD05B/00

    (130 pages)
    EN Vivid EditionClick here2FR Vivid EditionCliquez ici10DE Vivid EditionHier klicken18ES Vivid EditionHaga clic aquí26NL Vivid EditionKlik hier34IT Vivid EditionFare clic qui42PT Vivid EditionClique aqui50GR Vivid Edition∫¿ÓÙ ÎÏÈÎ Â‰Ò 58SV Vivid EditionKlicka här66FI Vivid EditionNapsauta tätä74PL Vivid EditionKliknij tutaj82CZ Vivid Editi …
  • Dell EMC

    VNX series

    (24 pages)
    Dell EMC Storage with Milestone XProtectCorporateSurveillanceJune 2018H14501.4Configuration GuideAbstractThis configuration guide provides the storage-specific configuration requirements andMilestone storage tiering options necessary for a successful Milestone XProtectCorporate 2018 installation.Dell EMC Solutions …
  • Aluratek

    Cavalry ACUES3501000F

    (1 pages)
    M P 3T I F FJ P E GXWP D FP3.5” USB 2.0 eSATA External Hard DriveACUES350F_ Product Reference Card3.5” USB 2.0 eSATA External Hard DriveHigh-Speed data transfer rate: USB 2.0 - 480 Mbps / eSATA - 3 Gbps• Supports up to 1TB Hard Drives (enclosure only) • High-speed data transfer rate: USB 2.0 - 480 Mbps / eSATA - 3 Gbps • Backward compatible with …
  • Hitachi

    DK32EJ

    (1 pages)
    Quick Installation Guide 3.5 inch Hard Disk Drives DK32EJ-FC Connector Layout © The statements in this publication are not intended to create any warranty, expressed or implied. Specifications and product offerings subject to change without notice. All product names and logos are trademarks of their respective owners. For sales information on Hita …

Comments, Questions and Opinions: