Manualios.com

NanoXX 9500HD Operation & User’s Manual

NanoXX 9500HD Manual Online:

4.9, 991 votes
NanoXX 9500HD User Manual
NanoXX 9500HD User Guide
NanoXX 9500HD Online Manual

Text of NanoXX 9500HD User Guide:

  • NanoXX 9500HD, Chapter 5 >> Main Menu 23 English • Video Aspect Ratio: You can select the display format according to TV screen ratio. (Letter Box, Pan & Scan, Mixed, or Full) • Video Signal Type: RGB, Y/Pb/Pr, Composite • Video Freeze: On/Off • Dolby digital: PCM/Bitstream • Time Shift: Manual / Auto System Setup >> Time Setting Time Setting You can set the time zone. 1 Select Time Setting using the Arrow (▲/▼) buttons on the System Setup menu and press the OK button.  Set Time Zone: Pres

  • NanoXX 9500HD, Chapter 5 >> Main Menu 16 English  DiSEqC (Digital Satellite Equipment Control) System Mode You can select DiSEqC using the Arrow (◄/►) buttons. You can select one mode among DiSEqC Port1~4 for 1.0 and Tone Burst 1~2 and Off.  Tone 22kHz In case you are using a dual LNB or two antennas connected to a 22KHz Tone Switch Box, with 22KHz Tone Switch (On, Off, or Auto) you can switch between LNB or antenna.  Motor Select motor setting from DiSEqC, USALS, Positioner, and No.  DiSEqC 1.1 In case of DiSEqC 1.1 usage, select port 1~16 for the satellites by using the Arrow (◄/►) button  Signal Status Press the blue button, you can check

  • NanoXX 9500HD, Contents 3 English C ontents Safety instructions ................................ 2 Chapter 1 Before You Begin ................................... 4 General Features ................................. 4 Accessories .......................................... 4 Chapter 2 Controls and Functions ........................ 5 Front Panel .......................................... 5 Rear Panel ........................................... 5 Remote Control Unit ............................ 6 Chapter 3 Connections ........................................... 7 Location of your receiver ........................ 7 Connecting your receiver

  • NanoXX 9500HD, Chapter 2 >> Controls and Functions 5 English C ontrols and Functions Front Panel 1 Power ( ) button Turns your receiver On/Off. 2 Arrow (◄/►) buttons Adjusts the volume and moves the cursor left/right on the menu 3 Arrow (▲/▼) buttons Changes channels or moves the cursor up/down on the menu. 4 MENU button Displays the menu Exits from the current menu or goes to the previous menu 5 OK button Conrms selection 6 DISPLAY Displays channel information Displays local time in Standby mode Rear Panel 1 RF IN (Optional) It Connects to the terrestrial antenna for DTV signal. 2 Dish INPUT Connects to the satellite dish. 3 LO

  • NanoXX 9500HD, Chapter 4 >> Initial Settings and Operations 10 English • RED (MoSAiC): Save • OK: Save and changes to exit for AV mode. • Menu: Save the changes to exit for AV mode. • Select one or more satellites according to the direction of your satellite dish. You can select many satellites depending on the direction to the satellites. 7 Press the Back ( ) button to return to the Installation menu. Auto Scanning 9 Select Auto Scanning using the Arrow (▲/▼) buttons and press the OK button. The preprogrammed

  • NanoXX 9500HD, Chapter 1 >> Before You Begin 4 English B efore You Begin General Features • Accurate, Brilliant Friendly OSD with Full Function • MPEG-2 (MP@ML), MPEG-2 (MP@HL), MPEG4 AVC/H.264, HP@L4 • LNB Controlling Logic (0/22KHz Tone) • SCPC/MCPC Receivable from C /Ku-Band Satellites • Digital Tuner with Loop-through • Wide Symbol Rate 2~45Mbps & Frequency Input 950~2150MHz • DiSEqC 1.0, 1.1 & 1.2 Supported (Go to X function) • 2 SCARTS for TV, VCR (optional) • 16 Bit Colors Graphic User Interface • Multi-languag

  • NanoXX 9500HD, Chapter 4 >> Initial Settings and Operations 12 English Selecting the OSD teletext, VBI teletext, Subtitle and DVB subtitle You can choose the OSD teletext, VBI teletext, subtitle and DVB subtitle for the current live TV program if provided from the broadcasting station. • OSD teletext: Press the Text ( ) button • VBI teletext: Press the Text ( ) button twice. • Subtitle: Press the Text ( ) button three times. • DVB subtitle: Press the Text ( ) button four times. MoSAic You can see multi picture by pr

  • Specications 31 English Specications TUNER & CHANNE Satellite(DVB-S2) Input Frequency 950-2150MHz Input connector F-type, IEC 169-24, Female Symbol Rate DVB-S2:10-30Ms/s(QPSK),10-31Ms/s(8PSK) 2-45Ms/s Demodulation QPSK, 8PSK Convolution code rate DVB-S2: Auto1/2,2/3,3/4,3/5,4/5,5/6,8/9,9/10(8PSK ) Auto 2/3,3/4,3/5,5/6,8/9,9/10(8PSK ) DVB-S: Auto1/

  • NanoXX 9500HD, Chapter 2 >> Controls and Functions 6 English Remote Control Unit 1 Power ( ) button for TV & STB Turns your receiver & TV On/Off. 2 Numeric (0~9) buttons Controls the number entry and changes program channel directly. 3 Mode ( ) button Switches between TV and Radio channel list. 4 Sleep ( ) button Shows the time setting for the sleep-timer. 5 MoSAic ( ) button Displays multi picture section. 6 Arrow (◄/►) or OK buttons Adjusts the volume level or moves the cursor left or right on the menu. Arrow (▲/▼) or OK buttons Chang

  • NanoXX 9500HD, Chapter 5 >> Main Menu 24 English Channel Setup >> Delete Channels Delete Channels You can delete TV and Radio channels you want. 1 Select Delete Channel using the Arrow (▲/▼) buttons on the Channel Setup menu and press the OK button. 2 Select the channel you want to delete using the Arrow (▲/▼) buttons and press the OK button. Press the Arrow (◄/►) buttons to switch between TV and Radio List. You can select multiple channels. Bulleted list indicates selected channels. Press the Green (sleep) button for Delete mode by Channel, TP or Satellite. 3 Press the RED (MoSAiC) button to delete selected channels. Channel

  • Chapter 5 >> Main Menu 26 English Parental Lock You can lock the channels to prohibit unauthorized users from watching specic channels. Press the Menu ( ) button. Select Parental Lock using the Arrow (◄/►) buttons on the main munu Parental Lock >> Channel Lock Channel Lock Whenever you want to see the locked channel you will be prompted to enter the PIN Code in the dialog

  • Chapter 5 >> Main Menu 18 English 3 Press the RED (MoSAic) button to save selected satellites and then press the Back ( ) button. 4 If you press the YELLOW (Audio) button, on-screen navigation menu is highlighted. Use the Arrow buttons to move the motor to the west, east, north, and south in order. Position of the motor can be restricted to the software set

  • NanoXX 9500HD, Troubleshooting 30 English Problem Solution No display LED on the front panel. No power supply Plug the power cord correctly. No picture. Ensure that the STB is switched on. Check the connection status. Check channels and Video output status. Poor picture quality. Check the signal level If this is too low, try adjusting the alignment of your dish. No sound. Check the volume level of the TV and STB Check the mute status of the TV and STB Check the connection of audio cable. Remote Control does not operate. Point remote control directly towards your receiv

  • NanoXX 9500HD, Chapter 5 >> Main Menu 14 English M enu Map Installation Satellite Antenna Setting Terrestrial Motor Setting Defaults Setting Auto Scanning Manual Scanning Auto Scanning Manual Scanning System Setup Language Setting OSD Language / Audio 1st Language / Audio 2nd Language /EPG 1st Language / EPG 2nd Language / Teletext Language / Subtitle Language OSD Setting Transparency / Window Trans / Banner Time / Screen Saver Time/Serial Module Media Setting TV system / TV Aspect Ratio / Video Aspect Ratio / Video Signal Type / Video Freeze / Dolby Digi

  • Chapter 4 >> Initial Settings and Operations 13 English To view channel list in specic order (Alphabet/Satellite/Provider/HD) 1 Press the Colored (Red/ Green/Yellow/Blue) button. Channel list is highlighted. 2 Select Alphabet, Satellite, Provider, or HD using the Arrow (▲/▼) buttons. The channel list is sorted automatically by your selection. 3 Select the channel p

  • NanoXX 9500HD, Chapter 5 >> Main Menu 20 English 2 Set the following options to complete Manual Scanning.  Satellite: Select a satellite by using the Arrow (▲/▼ ◄/►) buttons or Page (+/-) buttons.  Transponder: Set the transponder for the selected satellite. Select a transponder using the Arrow (◄/►) buttons. If you cannot nd your desired transponder, select New to change transponder information as follows: • Frequency Display the selected TP Frequency. • Symbol Rate Display the selected TP Symbol Rates. • FEC (Forward Error Correction) Select a FEC optio

  • NanoXX 9500HD, Chapter 4 >> Initial Settings and Operations 9 English I nitial Settings and Operations Menu Information A menu is a eld of text shown on the TV screen. Selectable lines are generally activated (highlighted). No-activated lines cannot be selected. Most of menus show short information at the bottom of the screen. This menu consists of 7 main menus: • Installation • Game • System Setup • Multimedia • Channel Setup • Conditional Access • Parental Lock 1 Using the Arrow (�

  • NanoXX 9500HD, 2 Safety Instructions English S afety Instructions This product has been manufactured to satisfy the international safety standards. Please read all of safety and operating instructions before operating the product and keep this manual for future reference. MAINS SUPPLY AC 90-250V~, 50/60Hz Operate your product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company. Disconnect the STB from the mains before you start any maintenance or installation procedures. OVERLOADING Do not overload a wall outlet, extension cord or adapter as this may result in electric re or shock. L

  • NanoXX 9500HD, Chapter 5 >> Main Menu 21 English 4 Press the RED (MoSAiC) button on the Manual Scan menu • Satellite: Select the satellite by using Arrow (▲/▼ ◄/►) buttons or Page (+/-) buttons • Transponder: Change the TP with the Arrow (◄/►) buttons • Frequency: Displays the current Frequency • Symbol Rate: Displays the current Symbol Rate • FEC (Forward Error Correction): Displays the current FEC • Polarity: Displays the current Polarity • Add TP: Press the Green (Sleep) button for a new TP add • Del TP: Delete the current TP with Yellow (Audio) button • RED (MoSAiC) button: Save the TP information <<TERRESTRIAL>> Auto Sca

  • NanoXX 9500HD, Chapter 3 >> Connections 8 English Connecting your analog receiver To facilitate the user using analog receiver to view analog channels, this product has been provided with a loop through terminal marked as “Loop”. Connect the coaxial cable from this terminal to the IF input terminal of your analog receiver. Now by keeping your receiver in standby, you will be able to tune and view analog channels from your analog receiver. Connecting your receiver to TV To connect your receiver with your television, you can use 4 different methods; via RCA cable, SCART cable, HDMI cable or YUV. Connect the RF cable to the terminal marked “RF OUT” on the rear panel of your receiver and

  • NanoXX 9500HD, Chapter 5 >> Main Menu 17 English 3 Press the RED (MoSAic) button to save selected satellites and then press the Back ( ) button. 4 If you press the YELLOW (Audio) button, on-screen navigation menu is highlighted. Use the Arrow buttons to move the motor to the west, east, north, and south in order. The position of the motor can be restricted to the software setting limits (West/East) using the RED (MoSAic) / BLUE (SAT) buttons. 5 Press the YELLOW (Audio) button to highlight Satellite. 6 Press the OK button on the Go to satellite Menu. Dish changes its position to the direction of satellite (depending on the types of motor, dish changes its

  • NanoXX 9500HD, C orrect Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, Please separate this from other types of wastes and recycled it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government o

  • NanoXX 9500HD, Chapter 5 >> Main Menu 15 English M ain Menu The menu has been carefully designed from user-friendly point of view to assure easy operation to your receiver. The main menu is classied into 7 sub menus that will carry out the various operations individually. Installation In the Installation menu, you can customize antenna setting and do channel scanning. Press the Menu ( ) button. Select Installation using the Arrow (◄/►) buttons on the main menu. Installation >> Antenna Setting Antenna Setting You can set antenna and LNB information for scanning chann

  • NanoXX 9500HD, Chapter 5 >> Main Menu 22 English System Setup You can set the system conguration in this menu. Press the Menu ( ) button. Select System Setup using the Arrow (◄/►) buttons on the menu. System Setup >> Language Setting Language Setting You can set languages for OSD, Audio 1-2, Teletext, Subtitle, and EPG 1-2 1 Select Language Setting using the Arrow (▲/▼) buttons on the System Setup menu and press the OK button. 2 Select any of OSD, Audio1- 2, Teletext, Subtitle, and EPG1

  • NanoXX 9500HD, Chapter 5 >> Main Menu 25 English Channel Setup >>Edit Channels Edit Channels You can rename the channel list. Select Edit Channels using the Arrow (▲/▼) buttons on the Channel Setup menu and press the OK button. • FAV (♥) button: Shows Favorite channel lists • Arrow (◄/►) buttons: Switches between TV and Radio channel lists To rename the channel list 1 Select the channel you want to rename using the Arrow (▲/▼), PR+/-, or Page (+/-) buttons and press the GREEN (Sleep) button. Font Table will appear. 2 Press the BLUE (SAT) button to delete th

  • NanoXX 9500HD, Chapter 4 >> Initial Settings and Operations 11 English • If there are multiple channels, use the Page (+/-) or the Arrow (◄/►) buttons to move to channels by page. • Press the Mode ( ) button to switch between the TV and Radio channel. • Method 4: In case of more than two scanned satellites 1 Press the SAT( ) button to show satellite list. 2 Move the cursor to the satellite of a channel to watch with the Arrow (◄/►) buttons and then press OK button. 3 You can follow the method 3 instruction for channel selection. • Method 5: How to move to the watched channel. 1 Press the last button w

  • Chapter 3 >> Connections 7 English C onnections Location of your receiver • Install your receiver in horizontal position • Do not put any heavy stuff such as a TV on your receiver • Do not install your receiver in the places as follows: Vibrating place, direct sunrays, Humid place, too high or low temperature, and no ventilated place. Connecting your receiver with dis

  • NanoXX 9500HD, Chapter 5 >> Main Menu 29 English 2) FTP Explorer Press O.K. to connect the FTP Server Select le and press Red Key (Mosaic) for S/W update. Conditional Access You can enjoy not only scrambled services using the Conditional Access Modules (CAM), but also free-to air services, Types of common interface module and smart card differ depending on the service provider. If you want to use conditional access modules, contact your service provider or distributor. • Without using the Conditional Acce

  • NanoXX 9500HD, Chapter 5 >> Main Menu 19 English - Go to Ref. Position: changed position of the motor also applies to the directions for other satellites. - Calculate Positions: Conrm the Enable Limits/ Disable Limits function pressing the OK button. This function may not be supported depending on the model. 9 The method to position motor is selected on the Continuous / Step (Impulses) / Time (Seconds) menu, If you press the Arrow (◄/►) button once on the Continuous mode, selected TP signal of the satellite is locked or the motor stops to move. On the Step (Impulses) mode, you can select steps (

Related Products and Documents (TV Receiver):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Harbor Freight Tools 93245 Assembly and operating instructions harbor-freight-tools/93245-C5D.pdf 12 May 2023 5 0.64 Mb
2 Philips AZ1080/00 Operation & user’s manual philips/az1080-00-3Z8.pdf 01 Sep 2023 14 0.73 Mb
3 Sony SL-2700 Operating instructions manual sony/sl-2700-M57.pdf 10 Aug 2023 43 3.46 Mb
4 VTech Rechargeable Power Pack InnoTab 3 / 3S Operation & user’s manual vtech/rechargeable-power-pack-innotab-3-3s-C9S.pdf 24 Jul 2022 8 0.48 Mb
5 Blanco 500-340 Specification sheet blanco/500-340-M1G.pdf 15 Dec 2023 1 0.23 Mb
6 Ariston MB 91 Specifications ariston/mb-91-934.pdf 05 Feb 2024 13 6.45 Mb

Similar Resources:

  • AXIL

    rt0420t2

    (96 pages)
    MANUAL DE USUARIOMANUEL D’UTILISATIONMANUALE UTENTEUSER MANUALKORISNIČKE UPUTErt0420t2Receptor DVB-T2 HD grabadorRécepteur DVB-T2 HD enregistreurRicevitore DVB-T2 HD registratoreRecorder DVB-T2 HD receiverDVB-T2 HD prijemnik sa snimanjemrt0420t2 …
  • HP

    PL4245N

    (1 pages)
    7 Connect an S-video Device8 Connect a Composite Device6 Connect a Component (YPbPr) Device2 Attach Speakers to TV 3 Connect Speaker Cables to TV4 Connect Subwoofer (optional)1 Attach Brackets to Speakers11 Remote Control12 Power On9 Analog Video from PCHP PL4245N 42" Plasma HDTVStart HereThank you for purchasing an HP PL4245N 42" Plasma HDT …
  • Homecast

    HT3000

    (6 pages)
    Digital Terrestrial Receiver Quick Setup Guide – Homecast HT3000 Step 1 – Connect your digital receiver After unpacking your digital receiver, connect as shown in the diagram below. Option 1: HDMI This is the recommended set up. …
  • SAB

    3606

    (42 pages)
    1 CONTENTS 1. SAFETY ..................................................................................................................................................... 3 2. INTRODUCTION......................................................................................................................................3 3. FEATURES.................. …
  • Mitsubishi

    HD-5000

    (24 pages)
     …
  • Samsung

    KS7D

    (90 pages)
    COLOR TELEVISION RECEIVERChassis : KS7D(N)_TimecopModel : CL29Z30PQTXXAXCOLOR TELEVISION RECEIVER FEATURES■■GREEN CRT■Turbo VoiceSERVICEManualCL-29Z30PQ …

Comments, Questions and Opinions: