Manualios.com

Hitachi SK-HD1500-S2 Operating Instructions Manual

  • SK-HD1500-S2 Color Camera
  • ma/bQguGXHLng
  • Operating Instructions Manual
  • PDF / Adobe Acrobat Reader
  • 88

Hitachi SK-HD1500-S2 Manual Online:

3.7, 986 votes
Hitachi SK-HD1500-S2 User Manual
Hitachi SK-HD1500-S2 User Guide
Hitachi SK-HD1500-S2 Online Manual

Text of Hitachi SK-HD1500-S2 User Guide:

  • Hitachi SK-HD1500-S2, 45 Function menu 7. Each menu item & description 7.1 VF menu Item Setting Initial setting Description VF OUT SEL COLOR Y,R,G,B COLOR VF DETAIL - - Change screen to VF DETAIL menu. VF MARKER - - Change screen to VF MARKER menu. SIDE PANEL - - Change screen to SIDE PANEL menu. VF DISPLAY - - Change screen to VF DISPLAY menu. VF ZEBRA - - Change screen to VF ZEBRA menu. FOCUS IND - - Change screen to FOCUS IND menu 7.1.1 VF DETAIL menu Item Sett

  • Hitachi SK-HD1500-S2, 64 Function menu 7.6 CUSTOM SW menu Item Setting Initial setting Description CS-1 SW ZEBRA, MARKER, VF-DTL, QUICK FOCUS(*), FAW ZEBRA Set CS-1 switch CA-CS SW ------, VF-DTL, MARKER1, MARKER2 ------ Set CS switch in the CA. LENS VTR SW RET-2, TALK TALK Set VTR switch in the Lens. HANDLE 1 SW (*) OFF, RET-1, RET-2, TALK RET-1 HANDLE 2 SW (*) OFF, RET-1, RET-2, TALK TALK Note Quick Focus automatically opens the iris then sets the video level with the electric shutter. With the resulting shallow

  • Hitachi SK-HD1500-S2, 6 Facility names and functions B Shoulder belt hook Attachment for separately sold shoulder belt. Viewfinder connector Connector for viewfinder cable. MON/RET output connector (BNC) HD-SDI signal output for monitor (75W ). The same character signal as the viewfinder is superimposed on the video signal to allow checking the setting menu from the monitor screen. REMOTE connector (4 pin) Connector for remote control unit. RET button Video return signal of channel1 on/off button. While

  • Hitachi SK-HD1500-S2, 54 Function menu 7.3 DETAIL menu Item Description DETAIL Change screen to DETAIL menu. SKIN DTL Change screen to SKIN DTL menu. HIGH CHROMA Change screen to HIGH CHROMA menu. 7.3.1 DETAIL1 menu Item Setting Initial setting Description LEVEL -128 to +127 0 Adjust Detail level H GAIN -128 to +127 -60 Adjust H. detail gain V GAIN -128 to +127 -60 Adjust V. detail gain H CRISP -128 to +127 -110 Adjust H detail crisp V CRISP -128 to +127 -110 Adjust V detail crisp LEVEL DEP -128 to +127 -50 Adjust level dependent of detail DTL FREQ 13, 14, 15, 16, 17

  • Hitachi SK-HD1500-S2, F MISES EN GARDE IMPORTANTES 1. Lire les instructions Lire toutes les instructions de sécurité et de fonctionnement avant de faire fonctionner l’appareil. 2. Conserver ces instructions Conserver les instructions de sécurité et de fonctionnement á des fins de référence ultérieure. 3. Tenir compte des avertissements Tous les avertissements qui figurent sur l’appareil et dans le mode d’emploi devront être respectés. 4. Observer les instructions Observer toutes les instruct

  • Hitachi SK-HD1500-S2, 17 Tripod mounting Tripod mounting Use the accessory TA-Z3 tripod adapter to mount the camera on a tripod. 1. Securely attach the tripod adapter to the tripod. Shift the adapter screw position to obtain the best balance. The adapter can accept two types of screws. Use the screw hole that matches the tripod. 2. Secure the camera on the tripod adapter. Align the hooks of the camera and adapter, and then turn the lock lever in the direction indicated by the arrow. A click sound can be heard at

  • 23 White and black balance adjustment White balance adjustment White balance will be adjusted to the best effort in the sequence of AWB (auto white balance), ABB (auto black balance), and again AWB. Readjustment is normally not required even at power off/on. Be sure to adjust the white balance after changes in the lighting conditions. White and black balance adjustment progress can b

  • Hitachi SK-HD1500-S2, 4 Warnings and cautions when using Optical Fiber Camera Cable & Connector Handling This camera is using the optical fiber cable & connector which is required special technique for handling. 1. Cable Connector & Receptacle (1) FCF (Fiber Cable Female) (2) FCM (Fiber Cable Male) (3) FCFR (Female Receptacle) (4)FCMR (Male Receptacle) 2. Maintenance tool & information (1) Cleaning Stick (CANARE CLETOP 2.5/2.0) (2) CLEANING KIT Fiber optical cable assembly manufacture “CANARE” has Cleaning kit for the optical fiber cable & connector available. Detail is in URL http://www.canare.co.jp

  • Hitachi SK-HD1500-S2, A SAFETY INSTRUCTIONS Carefully read all safety messages in this manual and safety Instructions on your equipment. Follow recommended precautions and safe operating practices. SAFETY ALERT SYMBOL This is the “Safety Alert Symbol.” This symbol is used to call your attention to items or operations that could be dangerous to you or other persons using this equipment. Read these messages and follow these instructions carefully. It is essential that you rea

  • 7 Facility names and functions C MIC connector (XLR, 3pin) Connector for microphone. The phantom power (DC+48V) can be supplied to front microphone from camera menu. (Refer to page 59.) LENS connector (12 pin) Connector for lens cable. SHUTTER switch Set to on to use the electronic shutter. At the SEL position, the shutter speed and mode are

  • 26 White and black balance adjustment Auto black balance error messages When auto black balance adjustment fails, the following error messages appear on the viewfinder screen for about 6 seconds. Message Cause Correction AUTO BLACK:NG CHANGE TO CAM TRY AGAIN The OUTPUT/AUTO KNEE switch is set to BAR. Set the OUTPUT/AUTO KNEE switch to CAM. AUTO BLACK:NG IRIS NOT C

  • Hitachi SK-HD1500-S2, 59 Function menu 7.4.5 AUTO IRIS menu Item Setting Initial setting Description AUTO IRIS REMOTE, AUTO AUTO Setting of Iris control mode. *1 IRIS TRIM -128 to +127 0 Adjust Auto iris output level PEAK/AVE 0/10, 1/9, 2/8, 3/7, 4/6, 5/5 0/10 Setting of Peak & Average detect for Auto iris IRIS GATE 1 to 6 1 Setting of Auto Iris gate. *2 LENS FILE LENS 1 to 8 LENS 1 IRIS SPEED, OPEN LIMIT, and CLOSE LIMIT are can be stored to lens file. IRIS SPEED -12

  • Hitachi SK-HD1500-S2, 31 Setup card Setup card operation The SD memory card setting data is loaded and saved, and the setup card is formatted according to the SETUP CARD menu. If the insertion of the setup card is followed by indication of SETUP CARD menu, the setup card is checked. When the check results are normal with system operation, the SETUP CARD menu appears in the viewfinder. When the check results are normal with control head function, the SETUP CARD menu appears in the viewfinder. When the check results are normal with system operation, the SETUP CARD men

  • Hitachi SK-HD1500-S2, 30 Setup card Setup card A SD memory card can be used for storing the setting menu data. The data can then be used to quickly set the proper setup. Setting data in a SD memory card can be transferred between same model, can not be transferred Between different ones. Handling The SD memory card can be inserted and removed regardless of power on or off. However, avoid removing while loading, saving or formatting is in progress, since operating error or SD memory card breakage can occur. Inserting Position the SD memory card as shown then insert the SD memory card into the insertion hole. If you intend to use the miniSD cards in the camera, always install the ad

  • Hitachi SK-HD1500-S2, 62 Function menu 7.5 FILE menu Item Setting Initial setting Description SCENE FILE - - Change screen to SCENE FILE menu. LENS FILE - - Change screen to LENS FILE menu. 7.5.1 SCENE FILE menu Item Setting Initial setting Description FILE SELECT SCENE 0 to 8, PRESET SCENE 0 Selection of scene file setting STORE FILE SCENE 1 to 8 SCENE 1 Setting of scene file memory STORE - - Store scene file data to memory

  • Hitachi SK-HD1500-S2, 48 Function menu 7.1.3 SIDE PANEL menu Item Setting Initial setting Description SIDE PANEL OFF, 4:3, 13:9, 14:9, 15:9 OFF Only when DISP SIZE is 16:9, it is effective. CONTRAST 1 to 5 1 Set side panel contrast BRIGHT 1 to 5 1 Set side panel brightness 7.1.4 VF DISPLAY menu Item Setting Initial setting Description EXTENDER ON,OFF OFF Display the Extender indicator in VF, ON and OFF SHUTTER ON,OFF OFF Display the Shutter indicator in VF, ON and OFF ZOOM ON,OFF OFF Display the Zoom indicator in VF, ON and OFF F

  • Hitachi SK-HD1500-S2, 10 Facility names and functions E INCOM PGM 1/2 level Controls the receiving sound volume of the program. INCOM 1/2 intercom level Controls the receiving sound volume of the intercom. INCOM 1/2 TALK ON/OFF switch Intercom microphone can be switched on/off. Upper: REAR MIC mode Intercom microphone always works. Intercom receive level can be adjusted with E7. Middle: OFF mode Intercom mic

  • Hitachi SK-HD1500-S2, B IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the product and the operating instructions should be adhered to. 4. Follow Instructions All operating and use instructions should be followed. 5. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleane

  • Hitachi SK-HD1500-S2, D WICHTIGE SICHERHEITSANWEISUNGEN 1. Alle Anweisungen lesen. Vor Betrieb des Erzeugnisses sollten alle Sicherheits-und Bedienungsanleitungen gelesen werden. 2. Die Anweisungen aufbewahren. Die Sicherheits-und Bedienungsanleitungen sollten fünftigen Bezug aufbewahrt werden. 3. Warnungen beachten. Die Warnungen auf dem Erzeugnis und in den Bedienungsanleitungen solten beachtet werden. 4. Anweisungen befolgen. Alle Bedienungsanleitung-und Verwendungsanweisungen sollten befolgt werden. 5. Reinigung Den Stecker des Geräts vor Reinigung aus der Steckdose ziehen. Keine flü

  • Hitachi SK-HD1500-S2, 3 Warnings and cautions when using Viewfinder lens hazard  Do not point the eyelens toward the sun or other bright light source. There is danger of physical burns and loss of eyesight.  Do not place the viewfinder with the lens pointed toward the sun. There is risk of burn damage to the viewfinder interior. Power supply The specified power supply input voltage of this camera is 12VDC. Be sure to use the designated power supply. Do not disassemble or modify The camera c

  • 77 Application note: Trunk video transmission Summary: An external HD-SDI (1080i) video source can be transmitted from camera to CCU. The video source can be transmitted to CCU and then output from CCU in synchronization with SK-HD1500. How to use: Change an internal coaxial cable inside CA-HF1500 to assign the trunk video input on HD-SDI2 connector. Be sure to s

  • 52 Function menu 7.2.6 KNEE/CLIP2 menu Item Setting Initial setting Description KNEE SAT -128 to 127 24 Adjust Knee Saturation. (*) KNEE SAT ON,OFF OFF Knee Saturation function ON And OFF WHITE CLIP -128 to 127 0 Adjust White Clip level WHITE CLIP ON,OFF ON White Clip function ON and OFF INITIALIZE - - Press the MENU SEL but

  • Hitachi SK-HD1500-S2, 13 Lens flange back adjustment Lens flange back adjustment When operating a zoom lens, if the focus is not precisely aligned at both the telephoto and wide angle extremes of the lens, the flange back (distance from the lens mounting plane to the focal plane) is adjusted. This adjustment is generally required only once unless the lens is replaced. Adjustment 1. Set the lens iris for manual operation. 2. Set a flange back adjusting chart about 3 meters distant. 3. Open the iris

  • Hitachi SK-HD1500-S2, 25 White and black balance adjustment Black balance adjustment Black balance requires adjustment in the following situations. Equipment being used for the first time Equipment idle for an extended period Large change of ambient temperature Gamma setting changed 1. Set the AUTO W/B BAL switch to ABB for automatic black balance adjustment. 2. The viewfinder displays the following messages during adjustment. The lens iris is automatically closed. 3. Adjustment is completed in several seconds and automatically stored in memory.       AUTO BLACK

  • Hitachi SK-HD1500-S2, 33 Setup card Data load, save or clear 1. After Display the SETUP CARD menu, select a file to load, save or clear. Viewfinder displays in control head mode. CCU side monitor displays in system operation mode.

  • Hitachi SK-HD1500-S2, 63 Function menu File structure There are ADJUST, COMMON, SCENE and LENS four major data files in the camera head memory. 1. The SCENE FILE is indicated at top right corner in the each menu in the FUNCTION menu. 2. The COMMON FILE and the TEMPORARY SCENE FILE data values are stored to the memory automatically. When the SCENE FILE 0 is selected, adjusted value data is stored to memory automatically. 3. SCENE 1 to 8: After selected scene file, adjusted value data is kept in the TEMPORARY SCENE FILE but required to push the memory switch for storing data to scene file. 4. PRESET SCENE FILE is the factory adjus

  • Hitachi SK-HD1500-S2, 41 Function menu 2. COLOR menu structure ■COLOR MENU      SCENE 0  GAIN       :>  BLACK/FLARE:>  GAMMA      :>>  KNEE/CLIP  :>>  MASKING    :>>> ■GAMMA     2:<   SCENE 0  U.GAMMA TBL:1[90%]  ULTRA GAMM�

  • 39 Function menu The camera head is connected with a CCU and a RU as an operational camera system, the camera head View finder display TOP MENU as followings. This is mainly used for camera man’s operation. VF MENU Open this menu by pushing the MENU SW in side of the camera. Close for pushing this again. The camera head is connected with a CCU and an RU as an oper

Related Products and Documents (Color Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 TRENDnet TPE-224WS - Web Smart PoE Switch Quick installation manual trendnet/tpe-224ws-web-smart-poe-switch-6OL.pdf 27 Dec 2023 11 0.57 Mb
2 Targus USB Mobile Port Replicator Operation & user’s manual targus/usb-mobile-port-replicator-U1Q.pdf 22 Nov 2023 16 0.15 Mb
3 First Alert CM480 Operation & user’s manual first-alert/cm480-R86.pdf 11 Aug 2023 8 0.7 Mb
4 NETGEAR WPN311 Specifications netgear/wpn311-RKP.pdf 25 Sep 2023 2
5 Nokia MD-100W Operation & user’s manual nokia/md-100w-6S1.pdf 15 Oct 2023 13
6 AEG Electrolux ER 6529 T User manual manual aeg-electrolux/er-6529-t-YIV.pdf 11 Dec 2023 11 0.59 Mb

Similar Resources:

  • Divitec

    XIN-VC-0622

    (28 pages)
    Please read this manual thoroughly before use, and keep it handy for future reference.Instruction ManualALL-IN-ONE CAMERACOLOR CCDWEATHERPROOFAF D&N ZOOM CAMERA …
  • WingScapes

    TimelapseCam WCT-00122

    (10 pages)
    wingscapes.com | 888.811.WING© 2013 Ebsco Industries, Inc. All Rights Reserved. Made in ChinaThis product is covered by one or more of the following US Patents: 6735387, 6768868, 6834162. Other patents pending.WARNING! This product may contain lead, a chemical known to the state of California to cause cancer, birth defects and other reproductive harm.Time …
  • Okina

    SIR-768AILP-IO

    (9 pages)
    Copyright 2010. All Rights Reserved. www.okinausa.com 1 REV012011-V03 SIR-768AILP-IO SIR-768AILP-IOP Operation & Installation Manual License Plate Capture Series Kit D&N License Plate Camera w/ 11 IR LED Illuminator Housing & Bracket FEATURES Camera – WDEM-7680LPDN-IO  1/3” Sony 960H Ex-View HAD CCD II  Sony …
  • Cisco

    TelePresence SX20

    (88 pages)
    1D1534504 User Guide Cisco TelePresenceProduced: November 2016 for CE 8.2All contents © 2010–2016 Cisco Systems, Inc. All rights reserved. 1Cisco TelePresenceSX10, SX 20, SX 80 MX 200 G2, MX 300 G2 MX 700, MX 800,User GuideD1534504 User Guide Cisco TelePresence Touch 10”Produced November 2016 for CE 8.2All contents © 2010–2016 Cisco Systems, …
  • Spyclops

    SPY-BULLETW

    (2 pages)
    SPY-BULLETW Weatherproof IR Color Camera Specification Packing List No Name Model Number 2. User Guide SPY-BULLETW 1 1. Weatherproof IR Color Camera SPY-BULLETW 1 Notes:Before providing power for the camera, please read this User Guide in detail! Model SPY-BULLETW Pick up Element 1/3" …
  • Cisco

    TelePresence SX10

    (26 pages)
    1D1509703 User Guide Cisco TelePresence SX10Produced: July 2014 for TC7.2All contents © 2014 Cisco Systems, Inc. All rights reserved. User GuideCisco TelePresence SX10TC 7.2 …

Comments, Questions and Opinions: