Manualios.com

Heli-Max 230Si Instruction Manual

Heli-Max 230Si Manual Online:

3.55, 1296 votes
Heli-Max 230Si User Manual
Heli-Max 230Si User Guide
Heli-Max 230Si Online Manual

Text of Heli-Max 230Si User Guide:

  • Heli-Max 230Si, © 2014 Heli-Max, a Hobbico company. HMXE0846 RTF with camera HMXE0847 RTF without camera 230Si Quadcopter Instruction Manual ® Please fully read and understand this manual and the operation and all safety aspects required of you for the safe operation of this product. Before use, if you feel this product is not for you please return it to your place of purchase. Heli-Max products are to be used by ages 14 and over. Manual Specifications and Description Changes The instruction manual, warranties an

  • 2 ® INTRODUCTION INTRODUCTION Thank you for purchasing the Heli-Max 230Si Quadcopter. We are certain you will get many hours of enjoyment out of this model. If you should have any questions or concerns please feel free to contact us at: helihotline@ hobbico.com. For the latest technical updates or manual corrections visit the Heli-Max web site at www.helimax-rc.com. If t

  • Heli-Max 230Si, 3 ® WARRANTY SERVICE WARRANTY SERVICE Heli-Max guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification. In no case shall Heli- Max’s liability exceed the original cost of the purchased kit. Further, Heli-Max reserves the right to change or modify this warranty without notice. In that Heli-Max has no control over the final assembly or material used for final assembly, no

  • Heli-Max 230Si, 4 ® FEATURES & SPECIFICATIONS FEATURES & SPECIFICATIONS Features ● Switchable TAGS-FX™ Sensor Fusion stabilization system ● On board micro digital video camera (HMXE0846 only) ● On board micro snap-shot digital picture camera (HMXE0846 only) ● USB Micro SD Card reader (HMXE0846 only) ● 2G Micro SD removable card (HMXE0846 only) ● LEDs for orientation built into frame ● Actual Direction Control fl ight mode ● Return to Pilot function ● Failsafe Product Specifi cations Size: 230 mm (9.05") Quadcopter (Diagonal from motor center to motor center) Motors: 20 × 8 Coreless (4) Em

  • Heli-Max 230Si, 5 away from the rotors. The spinning blades of a model of this type can cause serious injury. ● When choosing a fl ying site stay clear of buildings, trees and power lines. AVOID fl ying in or near crowded areas. ● DO NOT fl y close to people or pets. Maintain a safe distance from the quadcopter. ● Do not alter or modify the model. Doing so may result in an unsafe or un- fl yable model. ● When and if repairs are necessary you must correctly install all components so that the model operates properly on the gro

  • 6 Charge Warnings ● Only use the included charger with the included LiPo battery. Do not attempt to use the provided charger with NiCd, NiMH or batteries with other chemistries. ● Do not leave the charger unattended while in use and always charge your battery in a fi re-resistant location. ● Disconnect the battery and remove input power from the charger immediately if either become

  • Heli-Max 230Si, 7 ® TRANSMITTER CONTROLS TRANSMITTER CONTROLS All controls are described with the tail pointing directly toward you. This is the best way to fly in the beginning since it keeps the control inputs oriented the same direction.

  • Heli-Max 230Si, 8 ® TRANSMITTER SETUP TRANSMITTER SETUP 1. Install 4 AA batteries in the transmitter by removing the battery cover from the back of the transmitter. Double-check the polarity of each battery before replacing the battery cover. 2. Turn the transmitter on and lay it down. Make sure that the blue light behind the Heli-Max panel is lit. The LCD screen should be on, with a throttle position indicator and other information. 3. Make sure the electronic trim indicators on the display are centered. NOTE: The transmitter must remain still when first turned on to allow it to calibrate.

  • Heli-Max 230Si, 9 2. Slide the battery into the battery compartment, tuck the wires into the opening, and close the battery cover. When you are ready to take off, place the quadcopter on a level surface and the LED to be steady “ON”. This allows the TAGS-FX control board to calibrate. NOTE: The 230Si will be “ON” at this point. Your quadcopter has a safe start feature built in that prevents the motor from activating unless the throttle stick has been lowered to the lowest position. If the motors won’t run, please make sure the throttle stick is all the way down and the throttle trim is at or below center. Wait a couple of seconds and try advancing

  • Heli-Max 230Si, 10 Slow Pirouettes By moving the left stick (left or right), you can rotate the quadcopter around 360°, which is called a pirouette. Forward Flight Now it’s time to work into basic forward flight. Just take the basic hovering maneuvers listed above and slowly fly out farther and faster and always bring the Quadcopter back after one pass. Practice controlled slow flight in close as well. The more time you spend practicing here, the easier things will be later on. ® POST-FLIGHT PROCEDURES POST-FLIGHT PROCEDURES Before turning off the transmitter, make sure that all the trim indicators on the transmitter are centered. If you fi nd that the model is consistently drifting i

  • Heli-Max 230Si, 11 fl ight modes, press down on the right control stick and release it. When the transmitter is changed to low rates, the ellipse in the lower center of the LCD screen will show a half ellipse and emit a single low pitch single beep. When changed to high rates, the ellipse will be complete and the transmitter will emit a single high pitch beep. Flight Control Sensitivity You can change the overall sensitivity of the TX465 transmitter. To do this, press and hold the right stick down. When the transmitter starts to beep continuously, move the throttle up or down to adjust th

  • Heli-Max 230Si, 12 for a second, fl ashes one more time, and then remains steady. In this mode, the quadcopter will maintain the current altitude when the throttle is at the mid-stick position. Moving the throttle below that point will allow the quadcopter to descend and raising the throttle above mid-stick will allow it climb. This setting makes the model more stable than just releasing the throttle and would be recommended any time the 230Si is used for photography. Normal Mode is selected when the Status

  • Heli-Max 230Si, 13 bring it to a hover. IMPORTANT! The transmitter antenna should be pointed at the 230Si at all times for this feature to work correctly. Failsafe If the 230Si loses contact with the transmitter, it will hover for few seconds and slowly land. You can test this feature by turning off transmitter. Please perform this test in an open area because the quadcopter may drift away from the point where it lost the signal. Do not turn the transmitter back on until the quadcopter has landed. If not, the 230Si wi

  • 14 Downloading the Video & Pictures from the Camera Install the MicroSD card into the reader. Plug the reader into the USB port of your computer. The USB connection will be auto recognized and the files ready to be transferred. At this point you can copy or transfer your files to your folder structure. ® SYSTEM ADJUSTMENTS SYSTEM ADJUSTMENTS NOTE: The TX465 is set up from the fac

  • Heli-Max 230Si, 15 ® TROUBLESHOOTING TROUBLESHOOTING PROBLEM: 230Si does not react to any stick movements. Solution 1: Make sure that the battery voltage is above 4.0 volts Solution 2: If the LED on the rear of the model is not steady, unplug the battery and turn off the transmitter to allow the control board to reset itself. After about a minute, turn on the transmitter and reconnect the battery. PROBLEM: 230Si responds to the controls, but barely moves left or right. Solution: Adjust the control sensitivity as described in the Flight Control Sensitivity

  • Heli-Max 230Si, 16 ® MAINTENANCE MAINTENANCE Replacing a Rotor Blade Remove the screw holding the rotor blade to the motor shaft and pull the blade up to remove it. There are arrows on the rotor blade and arm indicating which direction the rotor blade will rotate. When installing the rotor blades on the 230Si, please select a blade the same color and with an arrow in the same direction. When the blades are correctly installed, they should look like the blades on the quadcopter in this photo. Replacing a Motor 1. Remove the landing gear below the arm with the defective motor. 2. Remove the five screws holding the upper and lower frames

  • Heli-Max 230Si, 18 ® REPLACEMENT PARTS REPLACEMENT PARTS Key Part No. Description 1 HMXE2320 Prop Set (4) 2 HMXE2321 Main Frame Body 3 HMXE2322 Bearing Set (8) 4 HMXE2323 Spur Gear w/Shaft (4) 5 HMXE2324 Battery Frame 6 HMXM2054 TAGS-FX Control Board 7 HMXE2325 Control Board Dampners (4) 8 HMXE2326 Receiver Mount 9 HMXE2327 Left Front Motor CCW 10 HMXE2328 Left Rear Motor CW 11 HMXE2329 Right Rear Motor CCW 12 HMXE2330 Right Front Motor CW 13 HMXE2331 Rear LED w/Cover 14 HMXP1016 LIPO 1S 3.7v 1200mAH 15 HMXE2332 Landing Gear 16 HMXZ

Related Products and Documents (Quadcopters):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Elba EBO-D7080D(SS) Owner's manual elba/ebo-d7080dss-GF5.pdf 27 Oct 2022 14
2 Norcool Corner fridge Operation & user’s manual norcool/corner-fridge-C4H.pdf 03 Sep 2022 60
3 Navitar 61C-30-2-8X Dimensional drawing navitar/61c-30-2-8x-4M8.pdf 31 Dec 2023 1
4 AOC M2752VH Service manual aoc/m2752vh-79R.pdf 01 Feb 2023 67
5 Kermi E001M Instructions for installation and use manual kermi/e001m-LPY.pdf 03 Mar 2023 8
6 Sony Cyber-shot DSC-HX20V Instruction manual sony/cyber-shot-dsc-hx20v-362.pdf 13 Jun 2023 112 5.44 Mb

Similar Resources:

  • Carson

    X4 V2

    (2 pages)
    New Information for X4 Quadcopter V2Infos und Hinweise zu LED´s und Flugmodus!Information for LED-Lights and flight-mode!1.2.3.1.2.3.Press Elevator-/Rudderstick for short time, beep once means normal mode, twice isEXPERT mode with agile flightperformance.Press Throttle/Aileron sticker for short time, beep once enter anti-flip mode,twice isflipping mode.Eins …
  • dji

    FPV AIR UNIT

    (7 pages)
    Skip to contentManuals+User Manuals Simplified.dji FPV Drone User GuideHome » DJi » dji FPV Drone User Guide Contents [ hide1 DJI FPV Drone Quick StartGuide1.1 File Downloads1.2 Related ManualsDJI FPV Drone Quick Start Guidev1.2 …
  • dji

    Inspire 1 Pro

    (10 pages)
    © 2016 DJI. All Rights Reserved. 9INSPIRE 1 PRO User ManualFilters must have a weigh 7 - 11 g, with those weighing 10 - 11 g performing the best.Outside this range, the lter will decrease gimbal performance. DJI MFT 15mm f/1.7 ASPHsupports lters have a size of 46mm. The Balancing Ring must be installed on the cameralens when a lter is not used.Be …
  • KaiDeng

    K60

    (10 pages)
    2.4Ghz 6 AXIS R/C QUADCOPTER14+The knowledge and safety notes below are useful for your operation .Please read this manual carefully before start and keep it for further reference.Instruction Manual …
  • Carson

    X4 Quadcopter 550 SPY

    (40 pages)
    500507099 / 500507100 // Stand: Juli 2015RADIO CONTROLLED QUADCOPTER RTFX4 Quadcopter 550 undX4 Quadcopter 550 SPYDE // Betriebsanleitung 02 - 16GB // Instruction Manual 17 - 31FR // Avertissement de sécurité 32 - 34IT // Avvertenze di sicurezza 35 - 37 …
  • Sentera

    PHX

    (2 pages)
    Sentera PHXFirst Flight GuideAssemblySentera.com/PHXHelpFor Videos andFull ManualLeft Wing(Press On)Pitot TubePropellers(Fold Open)Wing Pins(Secure)Wing Spar(Slide In)Right Wing(Press On)Battery(Install for Power)AircraftComms BoxCharge Level ButtonPoint up for aircraft connectionConnect 6” USB Cable for powerConnect Ethernet to laptop for aircraft connect …

Comments, Questions and Opinions: