Manualios.com

Countryman E6 Manual 

Countryman E6 Manual Online:

3.05, 2338 votes
Countryman E6 User Manual
Countryman E6 User Guide
Countryman E6 Online Manual

Text of Countryman E6 User Guide:

  • 9 4. Spring the loop Holding the boom, gently pull the base of the earset. When you clip the earset behind your ear, the connector will push out against your earlobe and the boom will press smoothly along your face. This is the fastest way to get a really tight fit if the earset feels loose. Custom Fitting the E6 (cont.)

  • Countryman E6, 12 The C (cardioid) and H (hypercardioid) end caps modify your EarSet’s directionality. The EarSet should always have a protective cap in place to keep sweat, makeup and other foreign material out of the microphone. The hypercardioid cap provides the best isolation from all directions, with a null towards the floor where “wedge” monitors are often placed. The hypercardioid is slightly more sensitive to air movement and handling noise and should always be used with a windscreen. The cardioid cap is slightly less directional, with a

  • 11 • Placing the microphone too far forward can result in breath-related pops. Resist the urge to position the capsule directly in front of the mouth. • Placing the microphone too far back will impact bass response and isolation. • The perfect position is with the mic within about a 1” spot at the corner of the mouth, about 1/4” away from the face and pointed sligh

  • Countryman E6, 6 Head-worn mics provide isolation by keeping the element near the mouth. The ideal placement is with the tip of the element at the corner of the mouth, about 1/4” away from the face. Since every performer’s face is different, we’ve made it easy to custom fit the E6 Directional EarSet: 1. Try it on Pull the “C” shaped part of the earset open and clip it over your ear, so that the connector sits behind the earlobe and the boom goes over the top and runs along your face. You should feel the E6 gripping the top of your ear and sitting in the po

  • Countryman E6, 3 While the E6 Directional is designed for durability, moisture-resistance and flexibility, it is a high- precision instrument and we do suggest some basic precautions to prevent damage or sonic degradation: • Always use the E6 with a cap in place. The end caps are critical to the sound quality and also protect the capsule from makeup, moisture, and debris. • When a protective cap is not in place, avoid touching the end of the capsule with fingers or obstructing the opening with foreign substances. • The earpiece, boom, and end cap may be cleaned with alcohol wipes, spirit gum remover, or acetone. Do not let chemicals enter the front or back ports. •

  • Countryman E6, 18 Declarations We, Countryman Associates Inc., declare under our sole responsibility that the following products: E6 / E6i Directional Earset Microphone models E6D*, E6ID*, WCE6D*, WCE6ID* To which this declaration relates are in compliance with the essential requirements of: 2004/108/EC EMC EN 55103-1 EN 55103-2 2002/96/EC WEEE 2003/108/EC 2002/95/EC RoHS When used as specified. RoHS

  • Countryman E6, 13 When removing and replacing the protective caps: • Grasp the microphone low on the boom, close to the capsule. • Hold the protective cap by the sides and pull straight off to remove. • To replace the protective cap, position the cap, hold the sides and press straight on firmly. • Never touch the sides or top of an uncapped mic element. Do not let your fingers slide across the element when removing the cap. Using Directional Caps (cont.)

  • 17 Specifications (cont.) 1 kHz Polar Response 300° 0° 330° 60° 30° 90° 120° 150° 240° 180° 210° 270° -5 -10 -15 -20 dB 0 300° 0° 330° 60° 30° 90° 120° 150° 240° 180° 210° 270° -5 -10 -15 -20 dB 0 cardioid cap hypercardioid cap 20 50 100 500 1 k 5k 1 0 k 20 kHz200 2k 0 dB +10 -20 -10 Front Null 0.25 in 1 in 24 in 24 in Frequency Response

  • Countryman E6, 10 5. Position the boom The EarSet should now be firmly on your head, but the end of the microphone may be too high or too low, too far back or too far out in front of your mouth. Form the boom with your fingers until you get it comfortable and sounding good. The best spot is usually just back from the corner of your mouth when you are smiling. The boom should be very close to your face, or gently touching it, for most of its length. Custom Fitting the E6 (cont.)

  • Countryman E6, 16 Frequency Response: 30Hz to 15kHz Operating Current: 400uA Operating Voltage: 1 to 2 Volts Power Supply Voltage: +3V with 2.7kOhm load +6V with 5.6kOhm load +9V with 15kOhm load Weight: 0.07oz (2g) Supplied Accessories: Carrying case, black and white cable clips, wind screen, and hypercardioid and cardioid caps. Detailed information on connecting EarSets to wireless transmitters can be found at: http://www.countryman.com The E6 EarSet is available in three sensitivities to match a wide range of applications: Model E6DW5 for general speaking Sensitivity: 6.0 mV/Pascal Equivalent Acoustic Noise: 24 dBA SPL Overload Sound Level: 125 dB SPL Mod

  • Countryman E6, 2 Handling the E6 3 Connecting Snap-On Cables 5 Custom Fitting the E6 6 Using Directional Caps 12 Using Collar Clips 14 Emergency Back Port Cleaning Procedure 15 Specifications 16 Declarations 18 Contents

  • Countryman E6, 7 2. Curve the Boom The directional earset is designed for a particular side (usually left). Curve the boom left if you intend to wear the earset on your right side; curve it to the right to wear it on your left side. Form the earpiece and overall shape with your fingertips. Make sure there is a short straight section between the boom and the earpiece—this sits in front of the ear, locking the EarSet in place. To curve the EarSet, press and slide your thumb and forefinger along the boom several times. Don’t be afraid to form the boom as long as you are curving—not kinking—the tube. Custom Fitting the E6 (cont.)

  • Countryman E6, 15 This procedure is rarely necessary, but it may help if frequency response and directionality have deteriorated because the tiny grooves on the element are contaminated with dust or makeup. Make sure your hands, the work area, the EarSet’s boom and end cap are clean. Take a 6” - 8” piece of clean gaffer tape and form it into a circle, sticky side out. Stick it down on the top of a table, near the edge. Do not use tapes that may leave adhesive on the mic. Remove the cable and end cap. Hold the EarSet by its boom, about an inch from the bare mic e

  • Countryman E6, 14 The EarSet comes with two collar clips: one black and one white. These clips prevent movement in the cable from dislodging the EarClip and can reduce cable noise. They are specifically designed to match the diameter of your E6 cable, either 1mm or 2mm. Gently pull the cable down into the opening to attach the clip. Gently pull the cable out to remove the clip. We recommend using a collar clip with the heavier 2mm cable. Many performers choose not to use a collar clip with the lighter 1mm cable. If you choose to use a collar clip, we recommend leaving it

  • Countryman E6, 1 Thanks for choosing the Countryman Isomax E6 Directional EarSet microphone. We’re confident you’ll find it the finest, most natural sounding, and most unobtrusive directional microphone available. The EarSet directional mic provides high-quality pickup while rejecting noise, bleed from stage monitors, and feedback. It sounds like a world-class vocal mic, with far better isolation than an omnidirectional mic can provide. The ultra-miniature condenser element is held close to the mouth by a thin boom and comfortable ear clip. The entire assembly weighs less than one-tenth of an ounce and almost disappears against the skin,

  • Countryman E6, 5 The EarSet cable is easy to remove and change, allowing you to swap transmitter types, switch colors, or replace damaged parts in the field. Exercise care in connecting and disconnecting the cable connector. • Always grasp the connectors near the outer ends of the rubber sleeves and pull the connectors straight apart. When connecting listen for a click. • The connectors do not unscrew and normally rotate freely. • Avoid grasping the connectors where the sleeves overlap, as this can weaken the moisture-resistant seal and deteriorate the integrity of the connection. • Do not pull by the cabl

More Instructions:

DOWNLOAD

Related Products and Documents (Microphone):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Whirlpool Duet Steam Use & care manual whirlpool/duet-steam-I51.pdf 21 Sep 2022 52
2 Lincoln Electric POWERWAVE IM762-C Operator's manual lincoln-electric/powerwave-im762-c-3A7.pdf 04 Feb 2024 42
3 Neopost IS-440 Operation & user’s manual neopost/is-440-7R4.pdf 28 Aug 2022 228
4 Bogen MGN19 Specifications bogen/mgn19-3GV.pdf 28 Jul 2022 1 0.42 Mb
5 Sony KV-36HS510 Specifications sony/kv-36hs510-D7Y.pdf 25 Aug 2022 2 0.15 Mb
6 Fetco CBS-2021 e Series Programming manual fetco/cbs-2021-e-series-QW2.pdf 13 Aug 2022 10 0.28 Mb

Similar Resources:

  • Renkforce

    RF-907773

    (4 pages)
    b) Batterien• Achten Sie beim Einlegen der Batterie auf die richtige Polung.• Entfernen Sie die Batterie, wenn Sie das Gerät längere Zeit nicht verwenden, um Beschädigungen durch Auslaufen zu vermeiden. Auslaufende oder beschädigte Batterien können bei Hautkontakt Säureverätzungen hervorrufen. Beim Umgang mit beschädigten Batterien sollten Sie …
  • Paw Patrol

    202106

    (16 pages)
    PL © 2021 PSI PATROL. Wszystkie prawa zastrzeżone Bezprzewodowy mikrofon karaoke 1 INSTRUKCJA OBSŁUGI Bezprzewodowy mikrofon karaoke Nr partii: 202106 Dane producenta: mPTech Sp. z o. o. ul. Nowogrodzka 31 00-511 Warszawa Polska Infolinia: (+48 71) 71 77 400 E-mail: [email protected] Punkt dostarczania sprzętu: mPTech Sp. z o. o. ul. Krakowska 119 50-42 …
  • Sennheiser

    SR 300 IEM G3

    (3 pages)
    FEATURESSturdy metal housing 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free receptionEnhanced frequency bank system with up to 16 compatible frequenciesEthernet port for connecting to the Wire- less Systems Manager (WSM) software for control via computer – this delivers a good overview of monitoring and professio …
  • PCB Piezotronics

    377A07

    (9 pages)
    Model 377A07Precision Condenser MicrophoneInstallation and Operating ManualFor assistance with the operation of this product,contact PCB Piezotronics, Inc.Toll-free: 800-828-884024-hour SensorLine: 716-684-0001Fax: 716-684-0987E-mail: [email protected]: www.pcb.com …
  • Broadcast & Production

    MicroSet BP892x

    (2 pages)
    User ManualMicroSet® Omnidirectional Condenser Headworn Microphones BP892x / BP892xTH ■Features■Notes on use ■Connection procedureThis product requires 48 V DC phantom power.Output terminalsPIN1 (ground)PIN3 (cold)PIN2 (hot) ■SpecificationsFixed-charge back plate, permanently polarized condenserOmnidirectional20-20,000 Hz80 Hz, 18 dB/octave (wi …
  • Shure

    522

    (2 pages)
    Model 522 User Guide©2005, Shure Incorporated27C687 (Rev. 5)Printed in U.S.A.MODEL 522 UNIDIRECTIONAL DYNAMIC BASE STATION MICROPHONEThe Model 522 is a dynamic base station microphone designed especially for radio communications, paging, and dispatching sys-tems. Its cardioid (unidirectional) pickup pattern suppresses un-wanted background noise-the type of …

Comments, Questions and Opinions: