Manualios.com

TP-Link NC200 Operation & User’s Manual

TP-Link NC200 Manual Online:

3.05, 2540 votes
TP-Link NC200 User Manual
TP-Link NC200 User Guide
TP-Link NC200 Online Manual

Text of TP-Link NC200 User Guide:

  • NC200 Cloud Camera, 300Mbps Wi-Fi  Reboot: Click Reboot and then click Reboot on the pop-up screen to confirm. Rebooting will not change the camera’s setting. After rebooting, you need to log in to this page again.  Backup: Click Backup and follow the instructions on the browser to save the setting data file to your specified location.  Restore: Click Browse to locat

  • FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi Appendix B: Troubleshooting Question Answer or Resolution Features The maximum number of users accessing the camera simultaneously. The maximum number of users is limited to 13. However, it also depends on the total bandwidth accessed to this camera from clients. The actual number of connected clients varies by streaming mode, settings of resolution, frame rate and bandwidth. Obviously, the performance of the each connected client will slow down when many users are logged on. The camera can be used outdoors or not. The camera is not weatherproof. It needs to be eq

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi 1. Enter an IP address or domain of your FTP server, e.g. 192.168.1.168 2. Remain the FTP port number as the default value: 21. 3. Enter your username to log in to the FTP server, e.g. test. 4. Enter your password to log in to the FTP server. 5. Enter the path to the destination on the FTP server, e.g. /test 6. Enable Passive Mode. 7. Click Save to save and enable the settings. Click Test, and a test JPEG snapshot will be sent to the specified FTP ser

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi Appendix A: Specifications SYSTEM Image Sensor 1/4’’ Progressive scan CMOS sensor Resolution 0.3 Megapixel (640*480) Lens F: 2.8, f: 3.85mm Viewing Angle FOV=64° Digital Zoom 4x Digital Video/Image Video Compression MJPEG Frame Rate & Resolutions Max: 20 fps at 640*480 (VGA) Max: 30 fps at 320*240 (QVGA) Video Streaming Controllable frame rate and bandwidth Image Rotation: Mirror, Flip, Mirror Flip Configurable brightness, contrast, saturation Overlay capabilities: time, date, text Audio Audio Communication 1-way Audio Input Built-in microphone Audio Compression PCM Alarm a

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi  Note: If the installed plugin doesn't work, set your browser security settings to allow plugins. Here we take the settings for IE browser as an example. Go to "Tools→Internet Options→Security". Click "Internet→Custom Level", find the item "Download signed ActiveX controls" and check Prompt. Click "Local Intranet→Custom Level", find the item "Download signed ActiveX controls" and check Prompt. 4. After the plugin is successfully in

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi You can select Show password to display what you’ve entered. 4. A pop-up screen will prompt you for the network modification. Click Change to continue. 5. Click OK on the pop–up screen to finish wireless connection procedure. 15

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi Chapter 2 Introduction Thanks for choosing the NC200 Cloud Camera, 300Mbps Wi-Fi! 2.1 Overview NC200 is a versatile solution for home & office monitoring to keep an eye on your home, kids or workplace; whatever it is that you care for most. NC200 has a complete system with a built-in CPU and web server that transmits high quality video images, which can fully meet the need of your small office or home’s security and surveillance. NC200 is an affordable and fully scalable surveillance camera. Because the camera can be added to your existing local area network (LAN) with a stable high speed Wi-Fi conne

  • NC200 Cloud Camera, 300Mbps Wi-Fi 2.3 Appearance Description 2.3.1 Front Panel Figure 2-1 Front Panel  Microphone: The camera has a built-in internal microphone. This microphone is hidden in the pinhole located on the front panel.  System LED: Status Indication Flashing Red The camera starts booting up. Solid Red The camera has boot up, but is

  • NC200 Cloud Camera, 300Mbps Wi-Fi  Max Clients: Set the maximum number of clients that are allowed to connect to the extended network. Click Save to save and enable the settings. 3.4.5 Advanced → Cloud Settings Refer to 3.3.4 Basic → Cloud Settings. 3.4.6 Advanced → DDNS If your camera is connected to xDSL modem or cable modem direc

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi  Static IP: Select this option when a static or fixed IP address is obtained for the camera. A static IP address will ease your access to the camera in the future. Add your camera’s static IP information to your router to avoid IP conflicts.  MAC Address: Displays the Ethernet MAC address of the camera. The MAC address is read-only.  IP Address: Enter a fixed IP address for the camera in dotted-decimal notation.  Subnet Mask: Enter the subnet mask in dotted-decimal notation. The default value is “255.255.255.0.”  Default Gateway: Enter the default gateway

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi Click Save to save and enable the settings. 3.3.3 Basic → Wireless Connection The camera’s wireless function is enabled by default. This function helps to connect your camera to a wireless network wirelessly. If you don’t want to use this function, just select the Disable option.  Wireless Network Name: Displays the wireless network’s name. Make sure the camera and your PC connect to the same wireless network, or your PC can't access the camera.  Signal: Displays the strength of the wireless sig

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi account that is authorized to install applications.  Network congestion may prevent the Image screen from appearing quickly. You may choose lower resolution to reduce the required bandwidth. The camera work locally but not externally.  Might be caused from the firewall protection. Check the Internet firewall with your system or network administrator. The firewall may need to have some settings changed in order for the camera to be accessible outside your LAN.  Make sure that the camera isn’t conflicting with any other web server running on your LAN.  Chec

  • TP-Link NC200, ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 ●注意防潮,請勿將水或其他液體潑灑到本產品上。  ●插槽與開口供通風使用,以確保本產品的操作可靠並防止過熱,請勿堵塞或覆蓋開口。 ●請勿將本產品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位置中。 ●請不要私自打開機殼,不要嘗試自行維修本產品,請由授權的專業人士進行此項工作。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на від

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi  Note: If TLS is selected as the SSL Encryption, set the Sender E-mail Port as 465; if STARTTLS is selected, set the Port as 25 or 587.  Sending Interval: Set the limit for how frequently E-mail notifications will be sent. Select one interval from the drop-down list. For example, if you want to use Gmail with TLS for E-mail notifications, follow the steps below: 1. Enter the receiver’s E-mail address in Recipient E-mail Address, e.g. [email protected]. 2. Enter smtp.gmail.com

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi Connection, Wireless Extender, Cloud Setting, DDNS, Video, Motion Detection, Notification Sending, and LED. 3.4.1 Advanced → Status Refer to 3.3.1 Basic → Status. 3.4.2 Advanced → Network On this page, you can configure your network settings. 18

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi 3. Enter a password for your new account. The password should contain 5~20 characters. 4. Enter the password again to confirm it. 5. Click Save to save and enable the settings. Change Password You can change the password of all the accounts here.  Note: The default account and password are both admin. Everyone who knows the camera’s IP address can access the device with all configuration authority. It is necessary to change the default password if the device is intended to be accessed only by administrator. To change password, fo

  • TP-Link NC200, TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: Cloud Camera, 300Mbps Wi-Fi Model No.: NC200 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives: Directives 1999/5/EC, Directives 2004/108/EC, Directives 2006/95/EC, Directives 1999/519/EC, Directives 2011/65/EU The above product is in conformity with the fol

  • NC200 Cloud Camera, 300Mbps Wi-Fi  PPPoE: To enable or disable the PPPoE service here.  Status: Displays the PPPoE connection status.  Username: Enter the username for PPPoE service provided by your ISP.  Password: Enter the password for PPPoE service provided by your ISP. HTTP (Hypertext Transfer Protocol) This feature allows you to access and manage your

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi an easy-remember one. Camera name can contain up to 30 characters. It can only contain digits, letters, space and .-_@'. After your camera is registered successfully, you can go to www.tplinkcloud.com to view it. Sign Up for a TP-LINK Cloud Account If you do not have a TP-LINK Cloud account, click Don’t have an account? to sign up.  E-mail: Enter a valid E-mail address as your TP-LINK Cloud account. If you forget your TP-LINK Cloud password, you can reset it via this E-mail address.  Username: Enter a username as your TP-LINK Cloud account. Username should contain 1-32 characters. It can only contain letters

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi  Time: Displays the time when the log event occurs. The log can get the correct time after you configure on the Date/Time page. (go to Advanced → Date/Time )  Module: Displays the module to which the log information belongs. You can specify the module by selecting one from the Module drop-down list at the bottom.  Level: Displays the severity level of the log information. You can specify the level by selecting one from the Level drop-down list at the bottom. 

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi If the settings are tested incorrect, you will see the following screen. Click OK. Please check your network and E-mail settings and try again later. 3.4.10 Advanced → LED Refer to 3.3.5 Basic → LED. 3.5 System Click the System folder to display the sub folders including Account, Date/Time, Management, and System Log. 3.5.1 Account On this page, you can change the administrator’s password and manage the user account(s) that 33

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi  Time Stamp: If enabled, the current time of your camera, which can be set on System → Date/Time page, will be displayed on the top right corner of the live view screen. With this feature enabled, you can find out the exact time of the snapshot or record easily.  On-Screen Display (OSD): If enabled, you can set the OSD text and the OSD text you entered will be displayed on the top left corner of the live view screen. The OSD text is camera name by default. If Backlight Compensation, Time Stamp, and OSD are all enabled, see the following two p

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi  Motion Detection: To enable or disable the motion detection function here.  Sensitivity: Specify the level of difference between two sequential images that would indicate motion. Select one of the three levels of sensitivity from the drop-down list: High, Medium, and Low. Use your mouse to click on the parts of screen where you would like to monitor for motion. Click Save to save and enable the settings. 3.4.9 Advanced → Notification Sending Notification Sending settings are available only after the Motion Detection

  • NC200 Cloud Camera, 300Mbps Wi-Fi  Used as RESET button: With the camera powered on, press and hold the WPS/RESET button (more than 5 seconds) until both the System LED and WPS LED turn off. Then release the button and wait the camera to reset to its factory default settings.  Used as WPS button: If your router supports WPS, then you can press the WPS/RESET button for

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi 1. Select Enable to enable your camera’s wireless function. 2. Click Manually, and you will see the following screen. 3. In the Wireless Network Name field, enter the name of the wireless network to which your camera is ready to connect.  Note: The name must be exactly the same as that used in the wireless access point, or the connection will not be established. Leaving this field blank means the camera will attempt to access the nearest open network. If your PC wants to access the camera, make sure your PC and the camera are connecting t

  • TP-Link NC200, NC200 Cloud Camera, 300Mbps Wi-Fi Chapter 3 Managing the Camera The camera’s built-in web management page is designed to allow you to easily access and configure your camera. Use the management IP address of the camera to log in to the camera. You can find the IP address in two ways:  Run the Setup Wizard. The IP address is displayed on the Select a camera screen.  Find the IP address on the DHCP setting page of the front device such as router. 3.1 Login 1. Open a Web browser and type in the IP address of the camera you want to monitor in the address field

Related Products and Documents (Webcam):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 ProForm DTL42941 Operation & user’s manual proform/dtl42941-G2M.pdf 23 Nov 2023 30
2 Gladiator GARF19XXVK00 User instructions gladiator/garf19xxvk00-K3T.pdf 04 Feb 2024 20 2.39 Mb
3 BenQ MK2442 Quick start manual & user manual benq/mk2442-493.pdf 19 Jun 2022 51 2.07 Mb
4 Dynojet Power commander v Installation instructions manual dynojet/power-commander-v-HJ8.pdf 06 Feb 2024 7
5 Honeywell T7351 Installation instructions manual honeywell/t7351-316.pdf 27 Jul 2022 12 0.43 Mb
6 Raypak 185A Replacement instructions manual raypak/185a-UB2.pdf 16 Feb 2023 18 4.63 Mb

Similar Resources:

  • Planet

    ICA-550W

    (2 pages)
    ICA-550WDesktop Pan / Tilt Internet CameraKey FeatureData Sheet1PLANET ICA-550W provides an advanced digital solution of Internet Camera with pan / tilt capability and 802.11g wireless compliant device to meet more application demands. The ICA-550W supports either Ethernet or 802.11g WLAN network access, it can be placed anywhere for various surveillance dem …
  • Creative

    WC LIVE!

    (40 pages)
    1English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24Türkçe . . . . . . . . . . …
  • Linksys

    WVC54G - Wireless-G Internet Video Camera Network

    (2 pages)
    Model No.Product DataWirelessWVC54GSend live video and audio to a web browser anywhere in the world!Sends a high-quality live audio/video stream to your network wirelessly over 802.11g -- viewable from anywhereSupports up to four simultaneous remote usersBuilt-in stand-alone web server, no PC necessarySecurity Mode auto-matically sends email alerts with vide …
  • Elecom

    UCAM-C525FB Series

    (9 pages)
    12.0 megapixels Web cameraUCAM-C525FB seriesUser ManualBefore usingPlease read through the following contents before using.Safety Precautions• Please connect this to a USB-A port supplying 5V, 500mA power.• This product’s stand may not be able to fit on your laptop or display screen.• If you are unable to fit the stand on, please place it on a flat s …
  • Motorola

    FOCUS66-B

    (53 pages)
    USER’S GUIDEWi-Fi® Home Video CameraModels: FOCUS66-B, FOCUS66-B2, FOCUS66-S, FOCUS66-S2, FOCUS66-W, FOCUS66-W2The features described in this user’s guide are subject to modifications without prior notice. …
  • AudioCodes

    RXVCam50

    (16 pages)
    1 | Page AI 4K UHD Video Conference Camera RXVCam50 User Manual This guide provides a brief introduction to the AI 4K UHD Video Conference Camera functions, installation and operations. …

Comments, Questions and Opinions: