Manualios.com

AEG B1269 Instruction Book

AEG B1269 Manual Online:

3.65, 1001 votes
AEG B1269 User Manual
AEG B1269 User Guide
AEG B1269 Online Manual

Text of AEG B1269 User Guide:

  • AEG B1269, 10 Installation Caution: In order to avoid a hazard this appliance must be installed according to these instructions for installation The appliance unit can be mounted in any type of kitchen with a work top whose thickness is between 28 mm and 40 mm. Clearance The distance between the top side of the work top and the carpentry underneath must be at least 47 mm. Fixing Screw the fixing brackets out to such an extent that they can be turned in under the work top. Tighten the brackets on to the work top with an ordinary screwdriver. Cut-out measurem

  • AEG B1269, 8 Cleaning and maintenance For reasons of hygiene and safety, the griddle must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire. Splashguard The splashguard can be removed to make it easier to clean the surface. What to do: 1. Hold the splashguard as shown in the diagram 2. Lift the splashguard straight up 3. Clean the top surface as described in “cleaning the steel surface”

  • AEG B1269, 4 Safety information These warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the appliance. Your safety is of paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistance. Installing Do not install the appliance if the ceramic glass is damaged or cracked. This appliance must be installed according to the instructions supplied. Any electrical installation work must be undertaken by a qualified electrician/ competent person. Do not alter th

  • AEG B1269, 15 In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning: 08705 929 929 Your call will automatically be routed to the Service Centre covering your post code area. In-guarantee customers should ensure that the recommended checks under the heading "Something Not Working" have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for in-guarantee service calls. Help us to help you Please determine your type of enquiry before writing or telephoning. When you contact us we need to know: 1.

  • AEG B1269, 16 AEG offer the following guarantee to the first purchaser of this appliance: 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar documentation. 2. The guarantee covers all parts or components which fail due to faulty workmanship or faulty material. The guarantee does not cover appliances where defects or poor performance are due to misuse,

  • AEG B1269, 11 It is not necessary to attach the reinforcement beam to the work top surface, as it is held in place by a specially designed moulding, which is incorporated in the hob units flanges. The units externally measured length 145 mm: Cooker hood 290 mm: Two-zone ceramic-top electric hob Two-burner gas hob Grill Fryer Wok 580 mm: Four-zone ceramic-top electric hob Four-burner gas hob 725 mm: Four-zone ceramic-top electric hob Installation of a single unit When mounting a single unit, be it a half-or full size unit, in a worktopsurface w

  • AEG B1269, 3 Contents Page no For the user Your new appliance ...................................................................................... 2 Safety information ........................................................................................ 4 Description of the product ......................................................................... 5 Operating instructions ................................................................................ 6 Operating grill ....................................................................................... 6 Hints for using the ceramic glass griddle .............................................. 7 Cleaning and m

  • 6 Operating instructions - griddle Griddle control knob Variable griddle temperature "1" - low heat "9" - high heat "0" - off Control light Operating instructions

  • AEG B1269, 2 Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new appliance efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference. Should the appliance be transferred to a new owner please ensure this instruction book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings. If you require further assistance or advice, please contact our Customer Care Department either by letter or telep

  • AEG B1269, 7 Ceramic glass is insensitive to temperature shock and very robust, however it is not unbreakable. Hard and sharp objects, in particular, can damage the cooking surface if they fall on it. Warning If visible cracks appear in the surface, the appliance must be disconnected from the mains immediately. Spillages of plastics and other meltable materials such as sugar and food containing sugar (also applies to food with a natural sugar content to which no extra sugar has been added), such as marmalade, jam, fruit juice, etc. must be wiped off the ceramic surface while still hot. Failure to do this could cause the griddle to peel and crack. Use the enclosed glass scraper and p

  • 14 Something not working If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. IMPORTANT: If you call out an engineer to a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. If after all these checks, your appliance still doe

  • AEG B1269, 13 Mains Voltage 230 V Electrical connection 230V - 50Hz Total wattage 1500W This unit is labelled to indicate conformity with the lowvoltage directive (73/23/EEC) and the EMC directive (89/336/EEC). Unpacking Check that the appliance has no faults and is undamaged on delivery. Transport damage Any damage from transport which you have not carried out yourself must be reported to the retailer within one week of receipt. You will find the serial number on the rating plate located on the underside of the appliance. Write the serial number on the cover of these operating instructions to mak

  • AEG B1269, 17 Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local service organisation is aware of your move and able to look after you and your appliances. France Senlis +33 (0) 344 62 29 29 Germany Nürnberg +49 (0) 800 234 7378 Italy Pordenone +39 (0) 800 117511 Sweden Stockholm +46 (0) 8 672 53 60 UK Slough + 44 (0) 1753 219899

  • AEG B1269, 12 Electrical connection The electrical connection may only be performed by a qualified electrician/ competent person. The electrical connection must be carried out in accordance with prevailing regulations for appliances using heavy current. The connection must comply with any specific requirements specified by the local electricity supply authority. There must be no interference with any of the unit’s electrical parts. The cable is mounted in the pegs as shown. Unscrew the cover while connecting the cables. A unit led directly to the power point or the outlet rose. More units may be connected via one or more ju

Related Products and Documents (Griddle):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Olympus CX21 Maintenance manual olympus/cx21-7B7.pdf 29 Oct 2023 25
2 Elo TouchSystems Elo Entuitive 3000 Series 1939L Specifications elo-touchsystems/elo-entuitive-3000-series-1939l-F46.pdf 24 Oct 2023 2 0.19 Mb
3 Snapper LT195420, CLT195420, LT23460, Safety instructions & operator's manual snapper/lt195420-clt195420-lt23460-8Y6.pdf 23 Nov 2022 48 5.75 Mb
4 RCA TV VCR Operation & user’s manual rca/tv-vcr-R4Y.pdf 21 Jun 2022 44 3.38 Mb
5 GAS GAS TXT - PART LIST 2001 Parts list gas-gas/txt-part-list-2001-W3M.pdf 10 Mar 2024 77 8.57 Mb
6 Olympus SP-500 Basic manual olympus/sp-500-8B6.pdf 16 Apr 2023 84

Similar Resources:

  • Chefman

    RJ23-SM

    (7 pages)
    1 INSTRUCTION BOOKLET READ ALL INSTRUCTIONS BEFORE USE. 16” ELECTRIC GRIDDLE RJ23-SM For your safety and continued enjoyment of this product, always read the instruction manual before using. …
  • Casselin

    CPASPMIP

    (72 pages)
    FRPLAQUE A SNACKER PREMIUMCPASPMIP – CPASGMIP– CPASGMRLPSAS CASSELIN185 A rue Louise Labbé 69970 Chaponnay FRANCETél : +33 (0)4 82 92 60 00 - Mail : [email protected]
  • EDM

    07663

    (10 pages)
    TABLA DE ASARGRELHADOR / HEALTHY GRIDDLEREF. 07663INSTRUCCIONES IMPORTANTES DE SEGURIDADINSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONSGRUPO EDM garantiza todos sus productos, declinando toda responsabilidad frente a daños originados por una incorrecta instalación de sus artículos.IMPORTADO POR: www.edmgrupo.comELEKTRO 3, S.COOP.C.L …
  • Southbend

    Platinum Series

    (80 pages)
    MANUAL 1185836 REV 3 (07/06)$18.00 PLATINUM SERIES SECTIONAL RANGEMANUAL SECTION SRInstallation & Operation ManualPlatinum Series Sectional Range WARNINGImproper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death.Read installation, operation, and maintenance instructions thoroughly before installing …
  • Falcon

    F900 SERIES

    (25 pages)
    1 F900 SERIES User, installation and servicing instructions GAS GRIDDLE G9541, G9541R, G9541CR, G9581, G9581R, G9581CR Read these instructions before use T100891 DATE PURCHASED: MODEL NUMBER: SERIAL NUMBER: DEALER: SERVICE PROVIDER: REV. 2 Published: 31/03/2016 …
  • Keating Of Chicago

    023897

    (1 pages)
    mllvltGrddlThrmsts11/981. Make sure that the thermostat capillary and bulb arecompletely protected by the shield, except for 1” (notincluding the swedge) at the end of the thermostat bulb.(See Note 1)2. Make sure that the thermostat shield extends to the frontedge of the plate, and that the capillary goes through theformed end of the shield. (See Note 2)3. …

Comments, Questions and Opinions: