Duplo DP-21S II Instruction Manual

Text of Duplo DP-21S II User Guide:

• Duplo DP-21S II, 9 2 1 Notes on Safety (Please Read and Observe) CAUTION Before moving the machine, remove the power plug from the outlet. • If the cord is damaged, this may result in fire or electric shock. Remove the power plug itself, not the cord. •Tugging the cord may damage it (expose conductors, or cause disconnections, etc.), resulting in fire or electric shock. Do not place the machine in an unstable position, such as on an unsteady support or sloping area. • If the machine is dropped or falls over, this could result in personal injury. Once the machine is in position, secure in place using the casters. • If the machine falls o

• Duplo DP-21S II, 101 6 2 1 Troubleshooting Cleaning Sheet : How to use The scanning section inside ADF can be cleaned by using Cleaning sheet. Press (FUNCTION SWITCH) key to show the screen at right. Press (FUNCTION SWITCH) key. The CLEANING MODE operation selection screen appears. Press (SELECT) key and select "ON." Use (SELECT) key to move the arrow on the LCD panel. Press (FUNCTION SWITCH) key to show the screen at right. 6.CLEANING 1 2 3 Continue Page ••• 1 2 3 6.CLEANING ON OFF 1 2 3 6.CLEANING ON O

• Duplo DP-21S II, 11 2 1 Positioning the Machine Installing the machine on a flat, stable surface. Avoid installing the machine in a dusty area. Avoid installing the machine in the direct sunlight or heat, such as near a stove. Ink may deteriorate and may cause bad prints, while the machine may indicate errors due to overheating caused by sunlight. Also avoid hot, cold, or humid areas since paper may absorb moisture, causing paper jams or wrinkles. Notes on Safety (Please Read and Observe)

• Duplo DP-21S II, Appendix Appendix This section contains an index and quick reference diagrams for basic operations. Index .................................................................................................................. 108 Quick Operation Guide .................................................................................... 110

• Duplo DP-21S II, 111 2 1 Appendix Make the required settings on the control panel. Enlargement and Reduction, Plate Darkness, Document mode, 94% Reduction, 2 IN 1 Function Press (PLATE MAKING) key. Check the finished plate. Adjust the printing position, printing speed and other settings as required. Tip •To make another test print, press T (TEST PRINT) key. ●Print Enter the number of prints on the key pad. Tip •To change the number of prints, press C (CLEAR) key, and enter the desired number of prints. Press (PRINT) key. Tip •To stop the machine midway during oper

• 17 3 2 1 Before Using This Machine 1 Part Names and Their Functions Printer Appearance w q !3 e r t y u i o !0 !1 !2 !4 No. Name Function q Document guide Slide to match the width of the document. w ADF Documents of sheet type can be printed consecutively. e Upper cover Open to replace the master roll, etc. r Feed tray descend switch Press to lower the feed tray. t Feed pressure adjuster leve

• Duplo DP-21S II, 10 L5-T3020 2 Do NOT touch the drum or rollers when you operate the jog switch. Do NOT put hands Inside machine while it is operatung. Hands could get caught up or crushed. WARNING Notes on Safety (Please Read and Observe) Warning Sticker Keep the WARNING stickers clean at all times. If stickers become damaged or come off, replace them with new ones. No. Parts No. Name Q’ty q L1-T3060 Warning Sticker 1 1 w L5-T3020 Warning Sticker 2 1 1 L1-T3060 WARNING ● Do not remove this cover. The inside of the printer contains movable cutting instruments, contact with which could result in injury.

• Duplo DP-21S II, 23 3 2 1 Before Using This Machine 1 This section describes the operating sequence from turning ON the power switch until the printer is ready to make prints, and how to turn OFF the printer power. Turning ON Printer Power Connect the power cable to the printer and a wall outlet. Switch the power switch to the “ ” position. The power turns ON. The message “SET PRINT PAPER” is displayed on the LCD panel. The printer functions are now set in “Standard Mode” (a page 24). When paper is loaded in the feed tray, the screen shown at right is displayed. When

• Duplo DP-21S II, 66 The confidential safeguard function, which prevents printing unless platemaking has been completed, is a simple means of prohibiting others from printing sensitive documents. IMPORTANT • When the Confidential Safeguard function is ON, printing cannot be performed with (PRINT) or T (TEST PRINT) keys. Other operations can be performed as normal. •Turning the power OFF does not turn the Confidential Safeguard function OFF. • Once platemaking is carried out, the Confidential Safeguard function is cleared. • Platemaking still functions even if the Confidential Safeguard function in ON. Press (STOP) key

• Duplo DP-21S II, 33 2 1 2 Printing Using Basic Functions Adjusting Paper Feed Pressure Adjust the paper feed pressure if an feeding error occurs when using thick or thin paper. ■ When no thick paper is fed Adjust the paper feed pressure adjuster lever to “HIGH”. ■ When two pieces of thin paper are fed Adjust the paper feed pressure adjuster lever to “LOW”. Loading and Replacing Paper

• Duplo DP-21S II, 50 Retrieving Settings Press (FUNCTION SWITCH) key. Press (SELECT) key several times to show the screen at right. Press (FUNCTION SWITCH) key. Press (SELECT) key several times to display “RE- TRIEVE”. Each time (SELECT) key is pressed, the arrow on the LCD panel moves as follows. “RETRIEVE” → “SAVE” → “CLEAR” → “CANCEL” Use the keypad to specify the number you want to retrieve. The saved number blinks. Select the blinking number. Press (FUNCTION SWITCH) key. The saved data is retrieved, and the standard screen appears. Retrieving Settings 1 2 3 5.MEMORY

• Duplo DP-21S II, 27 3 2 1 Before Using This Machine 1 How Platemaking and Printing is Performed The machine performs two processes: platemaking and printing. Platemaking In the “platemaking” process, the old master on the drum is removed while the thermal head creates the scanned image on the new master and transfers it onto the drum. Printing In the “printing” process, paper separated from the stack by the feeder roller and paper separator unit is pressed against the drum unit by the press roller. There are small holes over only

• 59 3 2 1 Printing With Various Functions Batch Printing (changing print quantity per document) You can change the number of prints made from each document. You can separate the number of prints for up to 15 documents. IMPORTANT • Select “Batch Printing” before starting platemaking. Press C (CLEAR) key to clear the number display. Press X = key.

• 72 Ink pack Lever Replacing the Ink Pack The message “EXCHANGE INK” is displayed on the LCD panel when the remaining ink is low. Replace the ink pack using the following procedure. IMPORTANT • Only use ink packs designed for this machine. Open the front cover. Grasp the lever and pull it toward you. Lift out the empty ink pack. Front cover EXCHANGE INK Ink pack

• Duplo DP-21S II, 6 Troubleshooting Chapter 6 Troubleshooting This chapter describes how to remove paper jams and what to do when error messages are displayed. Countermeasures to Troubles .......................................................................... 84 Power Does Not Turn ON ............................................................................ 84 Platemaking/Printing is Not Possible ........................................................... 84 Error Messages .................................................................................................. 85 Supplying or Changing Paper While Printing ..............................................

• Duplo DP-21S II, 3 2 1 Function Quick Reference Batch Printing ........ (a P.55) You can print the specified number of sets of copies in each set. 1 1 1 1 1 1 1 1 Document 1st set 5 copies x 2 sets 2nd set 3 copies x 4 sets 3rd set 2 copies x 5 sets 1 1 1 1 Changing Print Quantity per Document ......... (a P.59) This function changes the number of prints made from each document. 2 2 2 3 2 3 3 3 3 1 Documents 1 1 3 1st document 5 copies x 2 sets 2nd document 3 copies x 4 sets 3rd document 2 copies x 5 sets 2

• 13 2 1 Notes on Safety (Please Read and Observe) Printing and Duplicating Cautions There are restrictions on what you may print on this printer. Please be aware that there are some printed materials that are illegal even to possess. 1. Printed Matter Banned by Law •Paper money, currency, government bonds and national and local bonds cannot be duplicated, even if they are stamped

• 96 When and old master remains on the drum, “MASTER EJECT MISS” is displayed on the LCD panel. Remove it by following the procedure below. Press the plate ejection box release lever to open the master ejection box. Open the master ejection box until it stops. Press the JOG switch to find the edge of the paper, then stop the drum at the position shown in the diagram. WARNING

• Duplo DP-21S II, 86 Error Messages A paper jam has occurred in the feed tray. Remove the jammed paper. (a For details, see page 92, “When ‘PAPER LEFT JAM’ is displayed (Feed Tray)”.) A paper jam has occurred on the print tray side. Inspect the print tray side and remove the jammed paper. (a For details, see page 93, “When ‘PAPER RIGHT JAM’ is displayed (Print Tray)”.) There is an old master on the drum. Remove all the masters from the drum. (a For details, see page 96, “When ‘MASTER EJECT MISS’ is Displayed”.) There is an error during master setting. Open the top cover and remove the master that is l

• 7 Specifications and Maintenance Chapter 7 Specifications and Maintenance This chapter lists the machine specifications and describes maintenance, etc. Specifications................................................................................................... 104

• Duplo DP-21S II, 62 Dividing Sections with Tape-04 Available only with Tape Cluster Device Only the specified number of sets is printed with the specified number of prints taken as one set. Paper tape is inserted when printing of each set is completed. You can enter up to 15 groups of number of prints x number of sets. IMPORTANT • The optional tape cluster is required for dividing sections with tape. •You can select “Batch Printing” after platemaking. • When the optional tape cluster is installed, you cannot stop printing after each section. • See the user's manual

• Duplo DP-21S II, 2 The following is a quick reference to the functions of the DP-21SII/21LII/23SII printer. B4 Printout B5 Printout A4 Document Enlargement/Reduction ........ (a P.36) This function copies a document on one standard paper size to another larger or smaller standard paper size. 94% Reduction ....... (a P.37) This function slightly reduces the size of a document when printing to the same standard paper size as the docu- ment. Text/Photograph/Text and Photograph Mode ......... (a P.41) This function selects the optimum print quality to match the document. A4 Document A4 Printout (94%) Function Quick Reference ABCDEFGH ABCDEFGHIJKLNO PQRSTUVWXYZ abcdefghijklmnopqrs tuvwxyz ABCD

• Duplo DP-21S II, 52 Printing Two Different Document Pages on One Page ■ 2 IN 1 Function This mode prints two different document pages on one page. Documents Printout Two-in-one (2-IN-1) Function allows you to print two small documents on one page and also easily print for creating booklets that will be saddle stitched. When you use 2-IN-1 Function, the layout is as follows: IMPORTANT • If you are printing the documents at 100%, select a printing paper that is the size of the two documents. • When you enlarge or reduce two documents size by side, select a zoom ratio so that the documents fit ex

Related Products and Documents (All in One Printer):

Comparable Devices:

Similar Resources:

• montwill M1 (24 pages) Technical features:• red display of -1999…9999 digits• minimal installation depth: 25 mm, 26 mm, 27 mm or 40 mm without plug-in terminal• adjustment via factory default or directly on the sensor signal• min/max-memory• 10 adjustable supporting points• display flashing at threshold exceedance / undershooting• tara function• programming inter …

• Epson XP-610 (4 pages) Using the CD1 Make sure the printer is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable.2 Insert the product CD and follow the instructions on the screen to run the setup program. Mac OS X: Make sure you install Software Updater; internet connection required.3 When you see …

• HP Compaq Presario,Presario CQ5110F (1 pages) Filename: s3admca.doc Title: Addendum [3-column 1 or 2 pages] Template: HP-Print2K.dot Author: davidg Last Saved By: AnnSchmidt Revision #: 10 Page: 1 of 1 Printed: 10/25/02 11:45 AM Using Multi-Channel Audio Speakers If your PC has multi-channel audio speakers, you can connect 4 channels for 4 speakers output or 6 channels for 5.1 …

• Canon imageRUNNER 2202N (296 pages) FT6-0481 (000) XXXXXXXXXX © CANON INC. 2013 PRINTED IN CHINACANON INC.30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, JapanCANON U.S.A., INC.One Canon Park, Melville, NY 11747, U.S.A.CANON CANADA INC.6390 Dixie Road Mississauga, Ontario L5T 1P7, CanadaCANON EUROPA N.V.Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands(See http://www.canon-europ …

• HP 8050 PhotoSmart Inkjet (2 pages) Updates to HP CM8060/CM8050 Color MFP with Edgeline Technology - System Administrator Guide: Addendum A Specifications Physical Specifications Device Size Configuration Height Width Depth HP CM8050/8060 MFP with the HP single output bin 1220 mm (48 inches) 1500 mm (59 inches) 840 mm (33 inches) HP CM8050/8060 MFP with the HP single output bin and HP 4 …

• Panasonic KX-PW12CL, KX-PW12CLW, KX-PW22 (16 pages) Facsimile with Cordless PhoneKX-PW12CL/KX-PW12CLWKX-PW22CLH/KX-PW22CLKKX-PW32CLKX-PW42CLKX-PW52CLHQuick Reference Guide1億人のファクスReset buttonFlash/Clear buttonSpeakerphone buttonMicrophoneDial buttonsHold buttonIntercom buttonα-ALPHA5 buttonAuto Answer buttonStop buttonStart/Copy buttonReplay buttonHand Scanner button (KX-PW22CLH/KX-PW32CL/KX-PW …

Comments, Questions and Opinions: