AV Stumpfl SC MASTER 6 Operation & User’s Manual

Text of AV Stumpfl SC MASTER 6 User Guide:

• Volume Defines the volume setting for the corresponding stereo chan- nel after starting up the unit (Card_1...8Vol=0...31). A value of 0 = -79 dB and 31 = 0 dB. Via the IR remote control you can adjust the volume individually, starting from this pre-set value. Bass For bass settings for the corresponding stereo channels. Values between -7 and +7 can be set. In this context

• AV Stumpfl SC MASTER 6, Please note that the CF card must be formatted to the FAT file system and NOT to the FAT32 or NTFS file system! In Wings Platinum, project creation is media or object-oriented. This means that you arrange pictures, videos, music and control functions as desired and that the image mix is immedi- ately visible on the virtual screen. All components involved are accurately synchronized. The steps to take, which are ex- plained in more detail in the Wings Platinum Online Help, are as follows: Creating a project: The fastest and easiest way to do so is v

• Remote Input and Key Mask The SC Master 6/16 can be remotely controlled via four differ- ent input ports: 1. IR remote control unit or IR signal, respectively. More about this can be found in chapter „Fehler! Verweisquelle konnte nicht gefunden werden.“ on page Fehler! Textmarke nicht definiert.. 2. Starting of three shows via the 14-pin Remote co

• AV Stumpfl SC MASTER 6, together with an ENTER symbol. By the way, this symbol signalizes that a confirmation is required before the corre- sponding menu item can be activated. By pressing the ENTER key you can exit the menu. Good. Now you know how to enter a menu, how to navigate through it and how to make settings. So nothing can keep you from exploring and finding out about all the other menus. On the next page you will find a menu chart and, in the following chapters, information about any possible settings, organized according to main menu items. Menu operation via IR remote control Onc

• Time-controlled show start via the Scheduler A show on the CF card can also be started in dependence on date and time settings. This requires the DCF-77 Receiving Module SCF-RCC. This Receiving Module is able to receive the radio clock signal of the Frankfurt transmitter in nearly all regions of Europe. This signal contains the current date and Central European time. Th

• AV Stumpfl SC MASTER 6, Special features for programming ................................ 23 Producing a show medium 25 General ............................................................................. 25 Generating data for the SC MASTER 6/16 ....................... 25 The FlashCard Dialog in Wings Platinum..................... 27 Generating presentation data for the CF card.............. 29 Specifying show properties .......................................... 34 Editing Remote properties of shows ................................. 35 Special settings .

• AV Stumpfl SC MASTER 6, rows visible in the picture indicate that further menus can be found above and below. Main menu .... and sub menu arrows Entry menu symbols Let's briefly remember our sheet of paper and the window. Use keys Ï and Ð to move the window up and down, i.e. in verti- cal direction along a menu tree. The ENTER key moves the window to the right, the ESC key to the left, i.e. in horizontal direction along a menu branch. You can step through the various items of the main menu with keys Ï and Ð. The main menu is structured as follows: • "Settings" for loadi

• AV Stumpfl SC MASTER 6, Update of operating soft- ware Updating As the SC MASTER 6/16 includes a processor with operating software you can very simply keep your control unit up-to-date by loading new software. ÎDownload an Update File from the Internet. It is available at www.AVstumpfl.com under "Download" / "Firmware Up- dates". If you do not have access to the Internet, turn to our Support for help. Î Connect the RSRS232-IN port of the SC MASTER 6/16 to one of the serial computer ports (Com 1...4. ÎStart your computer and switch on the SC MASTER 6/16. Î Double-click the downloaded file SDUpdateE.exe to start it. Informa

• AV Stumpfl SC MASTER 6, Setting 75 SHOW.INI verändern 41 Show-Eigenschaften festlegen 35 Shows starten -erweiterte Anwahl 49 Show-Start mit Scheduler 51 Signal 88 Slider 87 SMPTE-Timecode 89 Startverhalten 42 Stromversorgung 16 T TimeDsp (Time Display) 80 Timer 50 Transponder 52 Treble 86 Ü Über die IR-Fernbedienung 49 U Update der Firmware 110 Upgrade der Geräteausstattung 92 V Volume 86 W Wiedergabe von Shows 46 Wiedergabe von synchronem Mehrkanalton 56 130 • 15BIndex

• AV Stumpfl SC MASTER 6, Cue-Out 88 CUE-OUT-Buchse 122 D DALI-Out 81 DATA IN / OUT-Buchse 125 DataIO (Data In/Out) 82 Daten für SC MASTER erstellen 26 Datenübertragung auf die CF-Card 43 DCF-77 51 Display 79 DLC-Steuersignal 88 DMX-Out 81 E EC Mixer 87 Entsorgung des Gerätes 6 ExtAdrs (Externe SCNet-Adressen) 78 ExtClk (External Clock) 83 F Features 2 Fehlerbehebung 106 Fernbedienung 14 Firmware-Update 110 FlashCard-Dialog 28 G Geräteansichten 9 Frontseite 10 IR-Fernbedienung 14 Rückseite 12 Gewicht 126 SC Master 16 15BIndex • 127

• AV Stumpfl SC MASTER 6, Trouble shooting Finding faults The SC MASTER 6/16 may only be one of a variety of differ- ent components within your installation. Any possible errors may, therefore, also be caused by other devices - which doesn't make troubleshooting any easier. In such a case it can be an advantage to understand what is happening. Don't panic and try a systematic approach to the problem. • Try to find out about the interaction between the devices for the particular application. • Check whether the necessary cables are connected. • Switch on all necessary devices and select the corre- spond

• AV Stumpfl SC MASTER 6, Timer The SC MASTER 6/16 has a timer for periodic, time-controlled starting of shows from CF card. The following menus allow you to select the corresponding timer parameters. AutoTimer By activating the auto timer (Auto Timer= ON), SC MASTER 6/16 starts timer operation immediately after starting up. This may come in handy for fixed installations running over a period of several days. Set Auto Timer=OFF to switch off the timer. ShowNumber (Show Number) This menu serves for selecting a show (from 1 to 120) on the CF card, which is to be started via a timer. Timer Time Here you can specify the interval, i.e. t

• AV Stumpfl SC MASTER 6, Text in display or via RS232 The SC MASTER 6/16 display can show any text. This may be useful if you want to display control information during the show. However, it is also possible to display variable contents. The information to be displayed can also be transmitted via one of the two serial ports of the SC MASTER 6/16. These are the individual steps for displaying text 1. In the Wings Platinum Device Pool, add a serial port under "Add device....." for the SC MASTER 6/16. 2. In the Properties Dialog set the address of this "serial port" to 1/2 =

• AV Stumpfl SC MASTER 6, List of problems In the following list of problems you can find some solutions to problems, sorted according to topics: After inserting the CF card the display shows "Reinsert Card". ÎThe CF card could not detected after insertion. You can repeat this step or switch the SC MASTER 6/16 off and on again with the CF card remaining in the slot. When starting up it is easier for the SC MASTER 6/16 to detect the CF card. When copying presentation data onto CF card the follow- ing message appears in Wings Platinum: "Not enough memory" although the CF card is new or empty. Î Presumably the CF

• AV Stumpfl SC MASTER 6, Select a "PC Baudrate" setting of 115200 Baud, provided the serial connection allows this. If its length does not ex- ceed 5 meters, there shouldn't be any problems. By plac- ing a checkmark next to "Enable SC Net feedback", you can have the contents of variables displayed on the Con- trol Panel. More about this in chapter Variables. For reasons of compatibility with older units of control technology there is also an DLC port. When the DLC port is used for programming, the DLC data signal is generated at the CUE-OUT connector of the SC MASTER 6/16. Compared to the SC NET port, however, the DLC port o

• AV Stumpfl SC MASTER 6, Contents Introduction 1 Control centre and multi-channel MP3-Player.....................1 The features ........................................................................2 Scope of supply ...................................................................5 Optional accessory .........................................................5 Address ...............................................................................7 Documentation status .....................................................7 Front and rear views 9 Front view ..........................................................................10 Rear View ..........................

• AV Stumpfl SC MASTER 6, Show start via transponder The transponder is an Identification Module containing unam- biguous code for contactless read-out via the corresponding Reading Module. These transponders are available as key rings, bank cards or watches. This unambiguous code allows one particular show on the CF card to be assigned to a transponder. This way, an English 50 • 5BPlayback of shows

• AV Stumpfl SC MASTER 6, The Start Behavior of the addressed show can be defined as follows: N Normal start. A show can only be started if no other show is running. The currently running show is not inter- rupted. I Interrupt Start; every running show is terminated B A running show is started again from the beginning, other shows continue. T Terminate Start; terminates only other shows but not itself M Memory start; a show is preselected and started auto- matically at the end of the running show A Added Start; show is run simultaneously in addition to the

• AV Stumpfl SC MASTER 6, Î By pressing both CARD VOLUME keys (b and a) of a channel simultaneously, the corresponding stereo pair is muted. On the display you can see an "M" instead of the level display. Press one CARD VOLUME key to cancel mut- ing of this stereo channel. Î Joint volume control of all channels is possible via the VOLUME keys. Keys TREBLE and BASS control the sound of all channels. Î If you want to terminate the show prematurely, press the STOP key  for more than 2.5 seconds or the ESC key on the SC MASTER for more

• • OpenCollector40-Remote for 8 contacts in parallel mode (simultaneous key presses are recognized). In the Remote table these inputs correspond to the first 8 Remote entries. The open-collector outputs are ad- dressed by registering an SC Net "OpenCollector 16out" module at SC Net address 2 with 40 channels. 4. SC Net Remote 16in via SC Net connection:

• AV Stumpfl SC MASTER 6, The Menu Items Setting Load For loading or activating all previously saved configurations, i.e. complete menu settings. Via input menu "Load Setting 1...6" you can select one out of seven previously saved con- figurations. Save For saving complete menu settings. Entry menu "Save as Set 1...6" allows you to select one out of seven memory locations. It is always the loaded or activated configuration which is saved. Factory In case of operating errors or if you happen to have mu

Related Products and Documents (MP3 Player):

Comparable Devices:

Similar Resources:

• THOMSON PDP2656S (30 pages) PDP2648SPDP2656SPDP2662SIt is important to read this instruction book prior to using your new product for the first time.Es importante leer este manual antes de usar por vez primera su euipo.usermanualTHOMSON46, quai Alphonse Le Gallo92648 BoulogneCedex FRANCEwww.thomson.net56038440 …

• Philips GoGear ViBE SA1VBE08W (2 pages) Philips GoGEARMP3 video playerViBE8GB*SA1VBE08WYour music and video clips on the moveSmall size, big entertainmentPhilips GoGear ViBE Portable AV Player packs big entertainment in a superbly small design. Its 1.5” full color display shows off album art and folder view ensures easy file navigation and organization.Your music and videos on the go - everyda …

• Pogo PRY900M2 (39 pages) User’s ManualAM/FM Radio Recorder/Voice Recorder/MP3 PlayerMODEL: PRY900M2Thank you for purchasing RADIO YourWayTM. Please read all theinformation in this User manual carefully prior to using RADIOYourWayTMand keep this guide handy for future reference. …

• Philips KEY011 (2 pages) For preview purpose onlyWearable MP3Up to 4 hours of musicWear and flaunt the sleek 128MB KEY013 and enjoy 2 hours of MP3 or 4 hours of WMA music on the go. Transfer your music and data or recharge via direct USB. And it’s 100% shock free.Ready to wear, Ready to go• Small and wearable - weighing only 31 grams• Ultra lightweight, strong and durable magn …

• ECG PMP 20 (160 pages)  Před uvedením výrobku do provozu si důkladně pročtěte tento návod abezpečnostní pokyny, které jsou vtomto návodu obsaženy. Návod musí být vždy přiložen kpřístroji.  Pred uvedením výrobku do prevádzk y si dôkladne prečítajte tento návod abezpečnostné pokyny, ktoré sú vtomto návode obsiahnuté. Návod mu …

• Samsung YP-P2 (104 pages) MP3 Playeruser manualimagine the possibilitiesThank you for purchasing this Samsung product.To receive more complete service, pleaseregister your product atwww.samsung.com/global/registerYP-P2YP-P2 …

Comments, Questions and Opinions: