Allied Telesis PR-400 KI Setup Manual

Text of Allied Telesis PR-400 KI User Guide:

• Step 1: Make sure that you have your user ID and password available before you start connection procedures. Connect the LAN cable included with the HGW modem to the LAN port on your computer. You can connect to any of the four LAN ports on the back on the HGW modem. The modem can be used as a wireless Router. The modem Wi-Fi passcode is the MAC address located on

• Allied Telesis PR-400 KI, Step 2: Open the web browser on the PC and type 192.168.1.1 in the URL field. Step 3: Enter “user” in the Name field and “user” in the Password field (all lower caps) when the login window appears and click Log In. Configuring the Home Gateway Internet Modem with the ISP User ID and Password

• Allied Telesis PR-400 KI, Configuring the Home Gateway Internet Modem with the ISP User ID and Password Step 5: Enter “ATCC” as ISP name. Step 6: Enter the USER ID received from Allied Telesis. Ensure the USER ID includes “@one.ocn.ne.jp” Step 7: Enter the Password received from Allied Telesis Step 8: Click the button and unplug the Ethernet cable ATCC a9ijg3

• Allied Telesis PR-400 KI, Step 9 : Wait a few moments for the modem to automatically restart. Configuring the Home Gateway Internet Modem with the ISP User ID and Password Step 9 : Wait a few moments for the modem to automatically restart. Step 10: After the router finishes re-booting you will see two SSIDs associated with the NTT Wireless Router when you search for wireless networks. Choose the NTT network (i.e.: PR 400KI -1) and type in the MAC address (See Step 1 for Mac address location) to log into your new wireless network. Step 11: Repeat Step 10 for all other devices that you want to have wireless internet

Related Products and Documents (Modem):

Comparable Devices:

Similar Resources:

• FlexDSL Orion3 (9 pages) FlexDSL Telecommunications AG Steinackerstrassse 31 8902 Urdorf Switzerland Page 1/9 Tel: +41 44 741 52 90 Fax: +41 44 741 52 93 Email: [email protected] Web: www.flexdsl.ch Ddd The FlexDSL Orion3 product family offers a broad range of products, which are based on the latest SHDSL.bis standards (ITU-T G.991.2 & ETS TS 101 524) The Fle …

• Renkforce 1491408 (4 pages) • Sollten Sie noch Fragen haben, die in dieser Bedienungsanleitung nicht beantwortet werden, wenden Sie sich an unseren technischen Kundendienst oder an andere Fachleute.Installation der Treiber/Software Stecken Sie den Bluetooth®-Stick noch nicht an! Zuerst muss die mitgelieferte Software installiert werden. Bei anderer Vorgehensweise kann es dazu komm …

• NetComm CD 2004 (2 pages) NETCOMM LIMITED ABN 85 002 490 486 • 2-6 Orion Road, LANE COVE, NSW, 2066 • phone 02 9424 2070 • fax 02 9424 2010 • email sales@netcomm.com.auwww.netcomm.com.auMega-i-ModemMega-i-ModemmodemSurf the Web, download MP3s, email your friends or chat online at V.90 speedFast and reliable V.90 Web connectionsExperience the online world of music, gaming, sho …

• NimbeLink Skywire LTE NL-SW-LTE-S7 Series (14 pages) Configuring Linux ‘pppd’ for Skywire® LTE NL-SW-LTE-S7xxx Modem Family NimbeLink Corp Updated: June 2018 PN 30222 rev 5 © NimbeLink Corp. 2018. All rights reserved. 1 …

• ProComSol HM-USB-ISO (10 pages) ProComSol, Ltd HM-USB-ISO User Manual MAN-1008 7/7/2009 Page 1 HM-USB-ISO User Manual Introduction The HM-USB-ISO HART Modem, USB is designed to connect PC’s to HART networks. Application software can then configure, monitor, and document HART based instrumentation. Software Drivers Before use, a USB Virtual Serial Port must be installed on the P …

• TP-Link TD-8616 (2 pages) Quick Installation Guide ADSL2+ Modem MODEL NO. TD-86167106504341 REV1.0.0Package ContentsResource CDEthernet CablePower AdapterTD-8616QIGMODEL NO. TD-8616 ADSL2+ Modem Phone Cable x 2ADSL SplitterHardware connection（Power)(ADSL)Step 1: Connect your devices step by step following the gure.Step 2: Power on all your devices and the …

Comments, Questions and Opinions: