Manualios.com

Animated Lighting HHIAB Assembly And Operating Instructions Manual

  • HHIAB Network Router
  • ma3CvPl6emAHA
  • Assembly And Operating Instructions Manual
  • PDF / Adobe Acrobat Reader
  • 8

Animated Lighting HHIAB Manual Online:

4.45, 1599 votes
Animated Lighting HHIAB User Manual
Animated Lighting HHIAB User Guide
Animated Lighting HHIAB Online Manual

Text of Animated Lighting HHIAB User Guide:

  • Overview Congratulations! You have purchased the Haunted House in a Box (HHIAB). It is a plug-and-play light controller from Animated Lighting that enables you to quickly build an exciting Halloween light show with your lights on bushes and trees, black lights, strobes, spot lights or just about anything spooky that lights up or you can shine a light on. Animated Ligh

  • Animated Lighting HHIAB, The Haunted House in a Box has been pre-programmed based on the following: Suggested Light Arrangements Light Channel Description (Recommendation) 1 Flood Light, Channel A. Placed upwards towards a large object in the back of the display. These two items work best together. If you place the Channel A ood light on the left side of your front door, then it is best to place the Channel B ood to the right side of your front door. 2 Flood Light, Channel B. If you place Channel A ood light on the left side of your front door, then it is be

  • Animated Lighting HHIAB, Suggested Layout As long as you do not put too many lights into one channel, or overload the entire light controller, you can split zones across multiple objects. This means you can put two or more lights on an individual channel with the light controller. If you have more lighted items to control than you have lighting channels, you can plug your ghoulish ghost and your vicious werewolf into the same lighting channel. Doing so will cause them to light and fade at the same time, therefore you may have to experiment with the placement location. Try placing them side by side, or on opposite s

  • Animated Lighting HHIAB, Setting Up the Base System This is the Monster Brain. Make sure it is located inside a building or a weather proof enclosure. Animated Lighting, Inc PAGE 4 Connect one end of the communications cable here. This is where the Monster Brain communicates with the external light controllers. Both plugs are labeled “RS485” and either plug will work. Connect the small plug of the wall transformer here. Do not plug the transformer into the wall outlet yet. Determine the nal location for the light controllers (mindful of the power requirements mentioned above), Monster Brain and speakers. On the back of the Monster Brain

  • Animated Lighting HHIAB, Animated Lighting, Inc PAGE 5 You can easily add multiple light controllers to your display with the Haunted House in a Box Expansion Light Controller, which is sold separately. You add an expansion controller into your display by daisy chaining it to your original Haunted House in a Box controller with a CAT 5 network cable as shown below: INITIAL CONTROLLER EXPANSION CONTROLLER 1) CONNECTION: Locate the RJ45 (8-pin) jacks inside each of your light controllers. Connect one end of a CAT 5 network cable into the open RJ45 jack of your original controller. Run the other end of the cable out of the hole in the bottom of the box, and into a hole on the bott

  • Animated Lighting HHIAB, A Haunted House in a Box light controller is rated for loads between 15 and 60 Amperes maximum. Most household wall outlets are rated for loads of 15 Amperes maximum. Therefore, unless you have specically installed an outlet that can handle 30 Amperes, you should locate two over-under outlets on separate circuits to power the light controller. (One power cord per two-hole, over-under outlet.) ALWAYS REMOVE POWER FROM CONTROLLERS BEFORE OPENING THE LID COVER TO THE CONTROLLER. DO NOT ATTEMPT

  • Support Issues or for More Details CALL: 816.941.0400 (9 a.m. to 5 p.m. CST, M-F excluding holidays) EMAIL: [email protected] Warranty and Disclaimer Please consult www.animatedlighting.com for product warranty and disclaimer information. Use for Year-Round The Haunted House in a Box can be used for several events to dazzle your friends and family: Christmas Use your Christmas

Related Products and Documents (Network Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 RuggedCom RuggedSwitch RSG2200 Specification sheet ruggedcom/ruggedswitch-rsg2200-224.pdf 07 Feb 2023 10 0.84 Mb
2 Makita 640 Parts breakdown makita/640-U9R.pdf 12 Dec 2022 2
3 Lindy RJ45 Operation & user’s manual lindy/rj45-9IT.pdf 25 Sep 2022 2
4 Fagor CF-172 User manual manual fagor/cf-172-692.pdf 20 Jun 2022 42 1.31 Mb
5 Lenovo THINKPAD X32 Setup manual lenovo/thinkpad-x32-E19.pdf 23 May 2023 2
6 Avital 3001 Installation manual avital/3001-ARD.pdf 02 Oct 2022 1 0.03 Mb

Similar Resources:

  • Black Box

    LB9002A-SC-R3

    (5 pages)
    © 2010. All rights reserved. Black Box Corporation.FREE 24-hour Tech Support: 724-746-5500blackbox.com 1 of 505/05/2010 #23276Express Ethernet SwitchesSegmenting your 10-/100-Mbps Ethernet LAN doesn’t have to be expensive! …
  • Lance Design

    ADX-8000

    (10 pages)
    ADX-8000DUAL POWER SUPPLY ANDETHERNET SWITCHInstallation and Operation ManualFirmware Version 1.2Lance Design / 27 Fairview Avenue / Ridgefield, Connecticut 06877Tel: 203-894-8206 / Fax: 203-894-8207www.lancedesign.com …
  • Billion

    BiPAC 2072

    (2 pages)
    BiPAC 2072 Extend your home networking through power lines Just plug the BiPAC 2072 into any power outlet, connect a network cable, and data signals are automatically transmitted through the power lines. The BiPAC 2072 can be used to bridge Ethernet devices such as modems, routers, PCs, set-top-boxes, and game consoles, enabling users to share network acce …
  • IMC Networks

    IE-MiniMc

    (8 pages)
    About the IE-MiniMcThe IE-MMiniMc Series of Industrial Ethernet,miniature media converters features 10/100switching copper-to-fiber conversion, plug-and-play operation, and a miniature size andcomplies with the IEEE 802.3af Power overEthernet standard. In addition, IE-MiniMc alsoincludes an extended voltage range; anextended operating temperature; and DINcl …
  • Cabletron Systems

    Spectrum EMM-E6

    (2 pages)
    PN 9031355-01 Page 1 TPXMIM BOARD AND PORT CONFIGURATIONUSING MIBNAV TOOLS ON EMME OR EMM-E6ADDENDUM This addendum to the TPXMIM Installation Guide updates the OID strings needed to set TPXMIM board and port assignments using the MIB navigator screen in EMME or EMM-E6 Local Management. For additional information regarding the MIB navigator screen, refer t …
  • Siemens

    RUGGEDCOM RX1500

    (856 pages)
    RUGGEDCOM ROX IIv2.6User GuideFor RX1500, RX1501, RX1510, RX1511, RX151212/2014PrefaceIntroduction1Using ROX II2Device Management3System Administration4Setup and Configuration5Troubleshooting6RC1154-EN-02 …

Comments, Questions and Opinions: