Manualios.com

Ansonic HD Network Cameras Operation & User’s Manual

  • HD Network Cameras Security Camera
  • maSEmABtZf95E
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 31

Ansonic HD Network Cameras Manual Online:

4.55, 2762 votes
Ansonic HD Network Cameras User Manual
Ansonic HD Network Cameras User Guide
Ansonic HD Network Cameras Online Manual

Text of Ansonic HD Network Cameras User Guide:

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 0908 Figure 1.11 DDNS Setup 1.6 UPNP Setup UPNP setup as Figure1.12. UPNP run by external address and port. Figure1.12 UPNP Setup 1.7 FTP Account FTP account setup as Figure1.13. First a FTP server is indeed. Then apply a FTP account from the FTP server (username and password). And you must create four directory as “alarm”, “log”, “set”, “update” or other directory name, also you can enter “./” then the entire document will be save in the root of the FTP server

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 43 42 5.4 Storage Full Alarm If the storage with Megapixel IP Camera then you can enable “Storage Full Alarm”, it will alarm when the usage of the storage close to 100%. In this page, alarm rate is usage of storage such as 95, it means it will alarm when the usage is 95%. Alarm output is similar to the other alarm output before. 6 System Setup 6.1 Serial Number and Kernel Version In this page you can view kernel version, serial number, file system ve

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 1716 Figure 2.4 Video Capture Setup You can enter number manually or drag the slider; also click “default” is a good method. High “Saturation” means color is more obvious; High “Contrast” means the effect is more obvious. All the parameters must according to the physical environment. 2.3 Time and Title Setup As we know, time and title are displayed in the video window. But you can hide them or set their transparency, position and so on. Transparency range from 0 to 100. 0 mea

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 4544 Select the user to be deleted, and click “Delete”, and it will pop-up a dialog, click “OK”, then the user was deleted figure 6.3, 6.4. 6.2.2 User Group Different user can have different permissions. Click “Modify” to modify the user or disable it or modify password. Figure6.3 Delete user Figure6.4 Delete user succeeded There are three different types of user group, viewer, operator and administrator. As a viewer,

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 0706 Figure 1.9 WIFI Setup 1.4 ADSL Setup ADSL setup as figure 1.10 The username and password of the ADSL are provided by network operators, enter the correct username and password, enable ADSL and save it. It can run correctly on premise that the username, password and the confirm password is correct. It will prompt error while the password and confirm password is incorrect. In order to verify the ADSL is run correctly, you can enable DDNS and access the device by domain name. enable DDNS as figure 1.11 DDNS Setup) 1.

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 3332 4.3.6 Schedule Record Except “Video Stream” the other parameter is the same with “Motion Detect Alarm Record”, Video Stream include “Snapshot” which means it will take photo during the schedule record time, “Video Main Stream” and “Video Sub Stream”. Figure4.14 Schedule Record Figure4.15 Time Table You can set time span for schedule record. The max number of time span is 24. And the time for schedule record and motion detect alarm record can not be the same. 4.4 Storage Manage 4.4.1 Unmount “Unmount” means remove the sto

  • Ansonic HD Network Cameras, Shenzhen Enerson Technology C o m p a n y L i m i t e d ANSON (HK) Technology Co., LTD. Address: 4F, Block 5, Wuzi Industrial Park, Fada Road, Bantian, Longgang District, Shenzhen, China E-Mail: info@cctv-ax. net Website: www. cctv-ax. com Address: 4F, Block 5, Wuzi Industrial Park, Fada Road, Bantian, Longgang District, Shenzhen, China E-Mail: info@cctv-ax. net Website: www. cctv-ax. com High-definition Network Cameras High-definition Network Cameras

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 2120 2.7 Audio Encode Enable “Enable Encode”. There are two type of encode, one is AAC another is G.711. G.711 with a fixed sample rate and bit rate, but AAC with three sample rate and bit rate such as 16K, 24K, 32K. 2.8 Media Status In this interface, the main duty is display the status of video encodes. Figure2.9 Audio Encode Figure2.10 Media Status 3 PTZ Setup 3.1 PTZ Basic There are 8 parameters about PTZ basic setup, for example

  • Ansonic HD Network Cameras, CONTENT 1 NETWORK SETUP 2 MEDIA SETUP 1.1 NETWORK STATUS 1.2 ETHERNET SETUP 1.3 WIFI SETUP 1.4 ADSL SETUP 1.5 DDNS SETUP 1.6 UPNP SETUP 1.7 FTP ACCOUNT 1.8 SMTP ACCOUNT SETUP 1.9 STREAM SETUP 1.10 PLATFORM SETUP 2.1 PLAY VIDEO 2.2 VIDEO CAPTURE 2.3 TIME AND TITLE SETUP 2.4 VIDEO ENCODE 2.5 PICTURE CAPTURE 2.6 AUDIO CAPTURE 2.7 AUDIO ENCODE 1 12 1 4 5 7 7 8 9 9 10 11 12 15 17 18 19 19 20 3 PTZ SETUP 4 RECORD AND REPLAY 5 ALARM SETUP 3.1 PTZ BASIC 3.2 PTZ ADVANCED 4.1 STORAGE INFO 4.2 PLAY BACK 4.3 RECORD SETUP 4.4 STORAGE MANAGE 5.1 MOTION DETECT ALARM SETUP 5.2 IO INPUT ALARM 5.3 VIDEO LOST ALARM 5.4 STO

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 2726 First right click “Download” for download the selected record then it will prompt a dialog figure 4.6, select a Figure4.5 Delete record succeeded Figure4.6 Dialog directory and change a name for the record, last click “Save”, well the record save succeeded.

  • HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 3130 Figure4.10 Motion Detect Alarm Picture Capture Before enable “Motion Detect Alarm Capture”, you must ensure “Picture Capture Setup” enabled. 4.3.4 IO Alarm Record The setup method is the same with “Motion Detect Alarm Record”. The condition of alarm is not the same with “Motion det

  • HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 5150 6.7 Config Manage When all parameters have been modified, you can download the configuration file and save it. Then you do not need to modify again only upload configuration file. Also you can view the configuration file in this page. Before upload configuration file, you must have a configure file first, an

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 4746 6.3 Time Setup There are two type of update mode in this system. One is “Manual”, the other is “NTP Server”. “NTP Server” will choose a same time zone with the client automatically. NTP IP is “time.windows.com”. NTP port can be a valid port and “Refresh Time” can range form 60 to 999999. Save all parameter, then it will update as a network clock. “Manual” means update time manually. You need to enter time, time zone and date manually. It will reboot after re-set time Figur

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 1918 2.4 Video Encode There is only one resolution with the main stream. But there are five resolutions with sub stream. All the encode format are H.264. As we know, I frame is a key frame. I frame interval is too e, the quality of the video will be poorer while the network is poor. So good network is a promise. When the message of the video increase imminently and the bandwidth is fixed, you can choose VBR (Bit rate Control), mosaic and shaking is the result when cho

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 1110 Figure1.14 SMTP Account Setup 1.9 Stream Setup Stream Setup as figure 1.15. Access Protocol: while the device is in public network, TCP is a better choose, while the device and the user are the same network then UDP is a better choose. The default WEB port is 80. You can change it at will. But if you change it as 8080, then you enter 192.168.0.123: 8080 for accessing the device. All the port in the interface can change at will but can not be the same. The unavailable port is a bad choose. F

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 4140 Alarm output is another way for IO alarm. Enable “alarm output” and connect external device for output such as Figure5.6 Time Span 5.3 Video Lost Alarm Too many reasons can cause video lost, such as disconnect video cable. In this case, we can enable “Video Lost alarm” for reminding. At the same time, many parameters need to be configured, as figure 5.8. Alarm output is another way for reminding “Video lost”. But you need to enable it and configure parameters for it. flash lamp. Alarm duration means during the time you se

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 2322 Figure3.2 PTZ Advanced 4 Record and Replay 4.1 Storage Info In this interface, just only show the statue of the storage, as figure 4.1 4.2 Play Back First you can set the query conditions about querying record as figure 4.2. Be careful, “End Time” can not more 7 days than “Start Time”. Record type include schedule, motion detect, alarm and all type; Media type include audio & video, video and picture; video stream include main stream, sub stream and all stream. Figure4.1 Storage Information Figure4.2 Query Condition

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 3736 Also you can set alarm time as following. The max number of time span is 24. And the time for schedule record and motion detect alarm record can not be the same. Different time spans in different colors. Figure5.1 Motion Detect Alarm Figure5.2 Motion Detect Alarm Time Each time span can not conflict, otherwise it will prompt figure 5.3:

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 4948 6.5 Log View This page, you can view the all logs that have been saved. First set “Log Date” that you want to view the logs and “Log Type”, click “Search”. Then it will list in the “System Log” table. Search condition figure 6.11: System log figure 6.12: Figure6.11 Search Condition Figure6.12 Log View 6.6 Log File There you can download or delete logs. Set “search condition” and click “Search”, it will display log by day figure 6.14. In the “Log

  • HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 1312 The device can login platform server on the premise that the server IP and Server port is corresponding to the server. The server account and password can enter them wt will. Of course enable login server is indeed. 2 Media Setup 2.1 Play Video The window for playing video as 2.1, it

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 3938 Alarm output is another way for alarm. Enable “alarm output” and connect external device for output such as Figure5.3 Time Span Error 5.2 IO Input Alarm IO input alarm is triggered by IO interface. Enable it in the interface and connect external device for inputting. speaker flash lamp. Alarm duration means during the time you set, it will go on alarm. Also you can set alarm time as following. The max number of time span is 24. Different time span in different color. Figure5.4 Alarm Output Figure5.5 IO Input Alarm

  • Ansonic HD Network Cameras, 1 Network Setup 1.1 Network Status The connection schematic diagram for the entire system frame of Megapixel IP Camera as figure 1.1. Connect PC and Megapixel IP Camera directly and set network parameter as follow: 1. the default IP address is 192.168.0.123, net mask is 255.255.255.0, so you must add a IP address make the PC can access the device (such as 192.168.0.88). 2. The net mask of the PC and the Megapixel IP Camera must be same. Make sure the direct network is through, as follow: “Start”-“Run”-enter “cmd” then enter “ping 192.168.0.123” and press “enter” on the keyboard. As figure 1.3, 1.4, and1.5. While the network is not through, please check it.

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 1514 Figure 2.2 Preset You can add/delete/call preset in the interface, steps as follow: Add Preset: the preset number range from 1 to 255, first turn lens and enter preset number then turn lens again and enter preset number as so on. Del. Preset: Select a preset number to be deleted from the option box and click “Del. preset” bottom Call Preset: Select a preset number from the option box and click “Call preset” then the lens will turn automatically. Click

  • Ansonic HD Network Cameras, HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 0504 After enter system select and click “Network Setup”, it will display interface as figure 1.7, displaying the IP address, gateway, net mask and DNS and so on. The detail information please refers to the actual configuration. 1.2 Ethernet Setup Ethernet setup as figure 1.8, all the parameter in the interface is needed to be reset. Also you can modify the IP address by IP search (carried with UC2) or other tools. Make sure the IP address to be m

  • HD Networ k Camera User ’s ManualHD Networ k Camera User ’s Manual 29 28 4.3 Record Setup 4.3.1 Basic Setup In this option, you need to set 4 parameters “Local Storage”, “Storage Media”, “Storage Strategy” and “Max Time Each File”. There are 7 methods about storage media. Storage strategy includes “Overwrite When Full” and “Stop When Full”. “Ove

  • Ansonic HD Network Cameras, Introduction Megapixel IP Camera is an embedded and 38*38 HD surveillance device designed for compressing and processing audio and video data. It consists of audio and video compressing encoder, IO channel, network interface, audio and video interface, RS422 serial interface, protocols interface and software interface. It also can process video, which mainly responsible for capturing image data, compressing H.264 image data, process data transmitted on internet and audio and video data, trans

Related Products and Documents (Security Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Broan KER222 Specification sheet best/ker222-63W.pdf 14 Oct 2022 2 0.19 Mb
2 Cooper Lighting Galleria CGCVI Specifications cooper-lighting/galleria-cgcvi-65D.pdf 16 Jul 2022 1 0.15 Mb
3 Rell Healthcare FP1921 rellhealthcare Operation & user’s manual rell-healthcare/fp1921-rellhealthcare-YYY.pdf 08 Nov 2022 31
4 Philips NR1012 Operation & user’s manual philips/nr1012-X4M.pdf 18 Jul 2023 3 0.14 Mb
5 Philips 29PT8306 Technical specifications philips/29pt8306-131.pdf 01 Feb 2024 2
6 PYLE Audio PLMRA1000D Operation & user’s manual pyle-audio/plmra1000d-4A3.pdf 22 Jul 2023 6

Similar Resources:

  • Axis

    M1103

    (82 pages)
    INSTALLATION GUIDEENGLISH DEUTSCHITALIANOESPAÑOLFRANÇAISAXIS M11 SeriesAXIS M1103 Network CameraAXIS M1104 Network CameraAXIS M1113 Network CameraAXIS M1114 Network Camera …
  • Monacor

    INC-1500THERM

    (20 pages)
    ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTSBEDIENUNGSANLEITUNGINSTRUCTION MANUALNetzwerk-WärmebildkameraThermal Imaging Network CameraINC-1500 THERMBestellnummer • Order Number 18.0135 …
  • Cisco

    Nexus 5010

    (10 pages)
    CHAPTERSend feedback to [email protected] Nexus 5000 Series Switch CLI Software Configuration GuideOL-16597-011Product OverviewThe Cisco Nexus 5000 Series is a family of top-of-rack switches for the data center. The Cisco Nexus 5000 Series offers high-speed Ethernet switching and supports Fibre Channel over Ethernet (FCoE) to provide data …
  • XVision

    XC960BN

    (16 pages)
    Professional HD 960H Long RangeIR Bullet Camera - 120m IR Night VisionUser ManualVersion 1Thank you for purchasing the XC960BN camera from Xvision.Please ensure that you read and understand this User Guide before operating the camera.Please store this User Guide in an easily accessible location.HD960H …
  • CohuHD Costar

    RISE Series

    (36 pages)
    Installation Manual 1 RISE™ Series 4220HD Installation Manual 9994000 Rev A youtube.com/CohuHD LinkedIn.com/company/CohuHD twitter.com/CohuHD facebook.com/CohuHD CohuHD.com (858) 391-1800 © CohuHD Costar, LLC reserves the right to change specifications without notice …
  • Sentry US

    EIVD36-460VFB

    (17 pages)
    Copyright © 2011~2012. All Rights Reserved. 1 I-344 / I -345 / I-346 / I-347 www.sentryus.com R201205-V23 EIVD36-460VFB EIVD36-460VFW EIVD36-470VFB EIVD36-470VFW Operational Manual 600/700 TVL Sony Effio-E Weatherproof Dome Camera with 36 IR LED FEATURES  1/3‖ Sony Ex-View HAD II CCD  Sony Effio-E DSP  600 / 700 TV Lines  3 …

Comments, Questions and Opinions: