APART DIMIC1 Instruction Manual
|
APART DIMIC1, 4 PAGING MICROPHONE Introduction Please read this manual before using the product in order to give you the necessary product and installation instructions to assure a seamless installation and non-compromised overall sound quality and functionality. Thanks for purchasing our DIMIC1/12(S) Digital paging station (Digital paging station slave unit). DIMIC1/12(S) is a versatile tabletop microphone (or slave unit), easy to configure via the host’s graphical user interface. You can even incorporate the unit(s) in your work surface, or mount the unit(s) on the wall. Affordable, versatile, but by no means a compromise on sound quality or on functionality �
Instruction manualDIMIC1/12(S) 5 Safety precautions • Keep this manual for future reference. • Take care of your connection wires: they should be free of damage. Damaged wires may result in poor sound quality or malfunctions and can cause damage to the installation. • Only use accessories specified by the manufacturer. • Make sure the wall
APART DIMIC1, 6 PAGING MICROPHONE Features and benefits • Inconspicuous and elegant design • Remarkable sound quality • Flexible microphone stem (DIMIC1/12) • Exchangeable paper inserts (labels next to knobs) • Unidirectional condenser microphone (DIMIC1/12) • Speech-optimized sound processing (DIMIC1/12) with speech optimized EQ, filter and limiter • 12 selection buttons and status LEDs (DIMIC12/12S) • Push-to-talk button and multicolor paging status LED • All zone selection knob (DIMIC1) • Expandable up to 64 zones, 64 presets and up to 120 mics! • Universal configuration of push buttons, making
Instruction manualDIMIC1/12(S) 7 • Balanced line-out allows long cables (DIMIC1/12) • Easy connection using standardized CAT5 cables • External power supply possible • Indoor use only Connecting the unit Consult the manual of your master unit before connecting the microphone. Use a standard CAT5 cable to connect the microphone to the main unit. No
APART DIMIC1, 8 PAGING MICROPHONE Front layout DIMIC12 Knobs 1 - 12 are for zone selection or programmable functions. The amber LEDs next to the knobs will light up when the knobs are pushed. The behavior of the LEDs and knobs depend on what has been programmed in the master unit. The knobs can be configured as latching or non-latching knobs, zone selection knobs, function knobs or preset recall knobs.
APART DIMIC1, Instruction manualDIMIC1/12(S) 9 Knobs 13 and 14 are the actual paging buttons: when pushing knob 13, all pageable zones will be paged. When pushing knob 14, all selected and pageable zones will be paged. The corresponding selection LEDs will light up to confirm the selection. The ready-busy LED is green when the unit is ready and when paging is allowed. It turns orange when a paging request is sent to the master unit and turns red when paging is forbidden due to priority restrictions. During the time the chim
APART DIMIC1, 10 PAGING MICROPHONE Knobs 1 – 12 are for zone selection or programmable functions. The amber LEDs next to the knobs will light up when the knobs are pushed. The behavior of the LEDs and knobs depend on what has been programmed in the master unit. The knobs can be configured as latching or non-latching knobs, zone selection knobs, function knobs or preset recall knobs. Front layout DIMIC12S
APART DIMIC1, Instruction manualDIMIC1/12(S) 11 “Slave to paging station” interconnection flatcable, supplied with the DIMIC12S. The holes for wall mounting are spaced 54 mm apart horizontally, and 82 mm vertically, heart to heart. Rear panel Holes for wall mounting the unit(s) Bottom view The slave units are supplied with metal brackets, which allow you to mechanically attach the units to each other Combining / expanding the unit
APART DIMIC1, 12 PAGING MICROPHONE 1. Output level adjustment: turn the potmeter to adjust the output level 2. Output link: RJ45 connector. Connect multiple DIMIC1/12(S) units in a daisy chain. The maximum number of units depends on the capabilities of the master unit. Output (link) and input are internally hardwired to each other. 3. Input: RJ45 connector: connect the DIMIC12 to the master unit using a standard CAT5 cable. 4. 24 VDC jack: connect an additional DC adapter here if the master unit is unable to supply the power for the
APART DIMIC1, Instruction manualDIMIC1/12(S) 13 DIMIC1 has no zone selection knobs. Only the push-to-talk button is present. Configuration and default functionality depends on the master unit’s possibilities. Ready-busy has the same functions as DIMIC12.
APART DIMIC1, 14 PAGING MICROPHONE Using the DIMIC1/12(S) for the first time Default settings: out of the box, the DIMIC12 is set up as a 4-zone paging mic. Knobs 1 to 4 are configured as zone 1 to 4 selection knobs. Knobs 5 – 12 have no function (yet) and must be configured via the user interface of the master unit. The slave unit has no default settings and must be configured before use. Knob 13, marked “all zones”, functions as an all zone paging knob. Knob 14, marked “selective” functions as a push-to-talk button. LED messages: during power on, the DIMIC12(S) LEDs light up 5 times from bottom to top, left and right rows simultaneously, to indicate that the u
Instruction manualDIMIC1/12(S) 15 Attention! can also program the unit, so that the selected zone LEDs stay lit after paging. Consult the manual of the master unit for more details. By using automated addressing, the master unit will recognize the microphone/slave, and will automatically recall the settings and functions of the push buttons after power up. When a ne
APART DIMIC1, 16 PAGING MICROPHONE RJ45 cable connections: Pin 1: Audio + (balanced) Pin 2: Audio – (balanced) Pin 3: GROUND Pin 4: not used Pin 5: not used Pin 6: 24 VDC power supply (max. 75 mA per mic or slave) Pin 7: RS485 Pin 8: RS485
APART DIMIC1, 18 PAGING MICROPHONE Specifications Dimensions base (w x d x h) 110 x 240 x 58 mm Cut-out dimensions 85 x 230 mm Mic stem length including mic and windscreen (DIMIC1/12) 395 mm Weight DIMIC1 600 g Weight DIMIC12 650 g Weight DIMIC12S 350 g Power supply 12 – 24 VDC/75 mA max Nominal sensitivity (DIMIC1/12) 85 dB SPL Maximum sound pressure level (DIMIC1/12) >110 dB SPL Nominal output level (DIMIC1/12) 775 mV THD (DIMIC1/12) typical <0.5% Frequency response -3 dB (DIMIC1/12) 220 –
APART DIMIC1, developed by Audioprof nv Industriepark Brechtsebaan 8 bus 1 2900 Schoten - Belgium Company names, product names and trademarks are property of their respective owners. Apart-Audio specifications are subject to change without notice.
Sennheiser ME 34 Microphone Instruction manual
ME 34 |
AV Department DCS 6000 Microphone Manual
DCS 6000 |
Audio Technica ATM350 Microphone Specifications
ATM350 |
Louroe Electronics Verifact E Microphone Installation and operating instructions
Verifact E |
Neumann.Berlin KFM 100 Microphone Operating instructions manual
KFM 100 |
Shure Microflex MX400D Series Microphone Operation & user’s manual
Microflex MX400D Series |
Califone 4805 Microphone Specifications
4805 |
Electro-Voice CH230WX Microphone Specification sheet
CH230WX |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Associated Electrics | MGT 4.60 SE | Operation & user’s manual | associated-electrics/mgt-460-se-NJ6.pdf | 23 Mar 2023 | 23 | |
2 | BT | 3205 | Operation & user’s manual | bt/3205-XTI.pdf | 14 Aug 2022 | 68 | 0.57 Mb |
3 | YOKOGAWA | AQ7260 OTDR | Operation & user’s manual | yokogawa/aq7260-otdr-SL8.pdf | 24 Apr 2023 | 442 | |
4 | Fancor | 50612 | Service manual | fancor/50612-SEE.pdf | 22 Oct 2023 | 30 | |
5 | Honda | 2007 Accord Hybrid | Owner's manual | honda/2007-accord-hybrid-8LI.pdf | 30 Apr 2023 | 3 | 0.15 Mb |
6 | Craftsman | 917.257621 | Owner's manual | craftsman/917-257621-1OH.pdf | 01 Nov 2022 | 56 | 6.93 Mb |
Audio Technica
• Smooth, extended frequency response with a slight rise occurringin the high-frequency region• Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transient …
AT4041(1 pages) |
Pyle
PWMA-1090UI800 Watt Dual Channel Wireless Rechargeable Portable PA System With iPod/iPhone Dock, FM/USB/SD, Handheld Microphone, and Lavalier/Headset Microphone
…
PWMA1090UI(4 pages) |
Phonak
Rebecca WoodsCheck01.10.2008 01: 57pmConnectH33ConnectRebecca WoodsCheck01.10.2008 01: 57pmConnectH33Connecting others microphones to Roger inspiro Roger inspiro mit anderen Mikrofonen verbindenConnecter Roger inspiro avec d’autres microphonesConexión de otros micrófonos con Roger inspiroNetwork compatibility Netzwerk-Kompatibilität Compatibilité avec …
Roger inspiro(2 pages) |
Louroe Electronics
The Verifact™ C is a low impedance, line level electret condenser microphone with pre-amp and omni-directional pickup. It is designed for mounting in special or customized housing. The Verifact™ C can pick up normal sounds 15 ft. away or within a 30 ft. Circle. It may be mounted up to 1,000 ft (305m) from the Louroe Base Station or audio interface ada …
Verifact C(4 pages) |
Kenwood
DESKTOP MICROPHONE INSTRUCTION MANUAL Thank you for purchasing this MC-6OA desktop microphone. This rrricrophone has been designed expressly for use with your amateur communications system. It provides excellent performance when used with any KENWOOD transceiver, thereby upgrading your existing system. The zinc die-cast base offers improved stability and is …
MC-60A(2 pages) |
Empire Professional Audio
A u t o - c h a n n e l - s e l e c t i ng i n f r a r e d f u n c t i o nP r o f e s s i o n a l w i r e l e s s microphone with optional m u l t i - c h a n n e lm a n u a lUHF200 optional c hanne lsAuto-channel-selecting infrared functionUHFP r o f e s s i o n a l W i r e l e s s M i c r o p h o n eUSER GUIDEProfessional wireless microphoneThankfu …
SNT-800(9 pages) |
Makita Saw 5007FAK#MV5YP9: 5007FAK Saw Parts list 5007FAK, 2 |
Dell Server Force10 C150Dell Force10 C150 Manual (Doc Type: Server Manual ) Force10 C150, 66 |
YASKAWA Robotics MOTOMAN-MH50YASKAWA Product Guide: MOTOMAN-MH50 PDF Instructions manual - AC63US MOTOMAN-MH50, 51 |
Whirlpool Water Filtration Systems WHARSS5Installation and operation manual for Whirlpool WHARSS5 Water Filtration Systems WHARSS5, 8 |
Naxa Portable TV NT-401Naxa NT-401 Manual (Instruction manual), @931A23 NT-401, 27 |
Sony Desktop VPCL138FX#57FM5F VPCL138FX: Sony Desktop Owner Documentation VPCL138FX, 2 |
York Heat Pump SUNLINE 2000 B2CH180York SUNLINE 2000 B2CH180 User Manual (Installation instructions manual), @4IW4R9 SUNLINE 2000 B2CH180, 16 |
Eyevis Projector ESP SERIESEyevis Product User Guide: ESP SERIES PDF Operation & user’s manual - 777ZWH ESP SERIES, 63 |
Weslo Exercise Bike Pursuit 695iPursuit 695i Operation & user’s manual - 78641N Pursuit 695i, 8 |
Saeco Coffee Maker Primea Cappuccino RingCoffee Maker PDF Operation and maintenance manual Primea Cappuccino Ring, 44 |
Char-Broil Grill 463270910Grill #VD6C8B 463270910, 28 |
Arcade legends Remote Control Sega megadrive 75020#T7P3E1: Sega megadrive 75020 Remote Control Instruction manual Sega megadrive 75020, 2 |