Manualios.com

JVC XM-448BK Instructions Manual

JVC XM-448BK Manual Online:

3.2, 2210 votes
JVC XM-448BK User Manual
JVC XM-448BK User Guide
JVC XM-448BK Online Manual

Text of JVC XM-448BK User Guide:

  • 36 English Handling MDs MD handling precautions —————————————— To maintain high quality audio for a long period Since the disc is accommodated inside a cartridge, it can be handled easily without caring about dust and dirt. However, to maintain the high audio quality for an extended period, use care in the following points. Installation location

  • JVC XM-448BK, 31 English TEXT COMPU LINK 1 (MASTER UNIT) 2 (SLAVE UNIT) COMPU LINK- 3 (SYNCHRO) TEXT COMPU LINK JVC’s TEXT COMPU LINK remote control system allows you to transfer text information recorded on the CD Text or MD among JVC audio components. • Each component must have the same remote control system. Connection with receiver (or amplifier) This system enables text information on the MD to be displayed on the receiver (or amplifier). • If the receiver (or amplifier) has the on-screen function, you can display the text information on any TV screen, and can do the following, using the on-screen function while watching the TV screen: – Operate this MD recorder

  • JVC XM-448BK, 10 English Number of tracks and total playing time Number of tracks and remaining recording time Disc title OR MODE Disc title Number of tracks and remaining recording time Number of tracks and total playing time Track No. and its playing time Track title ON/OFF DIMMER Using the display mode To switch the display information ————————— The display can show the disc title, track title and remaining time (recording time available when a recordable MD is loaded) information. When no track is selected (In Stop mode): Press DISPLAY/CHARACTER on the main unit

  • JVC XM-448BK, 38 English MD Restrictions Cause There is a maximum number of tracks which can be recorded, regardless of recording time. More than 254 tracks cannot be recorded on an MD. • Repeating erasure and recording on the same MD creates many blank portions sparsely on the MD. When recording on such an MD, a track is recorded on these blank portions sparsely. If a track is divided and recorded into so many portions, “DISC FULL” appears. • If a divided portion of less than 8 seconds is made while a track

  • JVC XM-448BK, 24 English Decrements by 1 OR ENTER 1 2 3 4 5 Blinks Example) When track No. 2 is to be erased Blinks Blinks Blinks Example) When SET is pressed Blinks 1 2 3 4 5 6 1 2 3 4 5 6 OR SET OR 3 Select a track number to be erased, then press SET. Select a track number by turning the jog dial on the main unit or by pressing < / 4 or ¢ / > on the remote control unit. Then press SET on the main unit or on the remote control unit. • You can also use the numeric keys on the cover panel of the remote control unit to select a track number, then press SET. To select a track, see “Selecting a track with the numeric keys” on page 9. • If you selected a wrong track number, press 7 STO

  • JVC XM-448BK, 16 English To adjust the analog input level —————————— The input level should be adjusted before recording the analog input. 1 In Rec/Pause mode, start playing the source for level adjustment. The level indicators show the input levels. 2 Turn the jog dial on the main unit to the right or left or press ¢ or 4 on the remote control unit to increase or decrease the recording level. As you adjust the recording level, “VOL. –10” will appear, for example. You can adjust the recording level between VOL.–50 and VOL.0 (–50 dB and 0 dB), or to VOL. – – �

  • JVC XM-448BK, 33 English Rule on Digital Copying The digital audio equipment exchanges audio signals in the digital forms through digital input/output jacks, and include the CD (Compact Disc) player, MD (Mini Disc) recorder and DAT (Digital Audio Tape) recorder. The digital audio equipment allows digital copy of signals with little deterioration of music signals. This has made it necessary to have a copy restriction rule for protecting the copyright, and the SCMS has been established as a result. SCMS (Serial Copy Management System) With a view to protecting the c

  • JVC XM-448BK, 25 English Blinks Blinks OR EDIT DIVIDE JOIN MOVE Canceled (MD total playing time display or Disc title) ERASE ALL ERASE 1 2 3 4 5 6 1 2 3 4 5 6 Erasing all tracks in an MD (ALL ERASE) The data recorded in an MD can be erased entirely. 1 Press EDIT on the main unit or on the remote control unit to select “ALL ERASE”. The ALL ERASE indicator lights up. Each press of the button switches the editing functions as follows. 2 Press SET on the main unit or on the remote control unit. • If the display shows “TRACK PRO

  • JVC XM-448BK, 40 English Specifications Specifications and appearance subject to change for improvements without prior notice. Minidisc digital audio system Magnetic modulation overwrite format Non-contacting optical method by semiconductor laser (λ=780 nm) 44.1 kHz ATRAC (Adaptive TRansform Acoustic Coding) method 2 channels 5 Hz to 20,000 Hz (±0.5 dB) 93 dB 91 dB Less than measurable limit Format Recording format Reading format Sampling frequency Compression/expansion method Number of channels Frequency response S/N ratio Dynamic range Wow/flutter Input terminals (Analog) (Digital) Output terminal (An

  • JVC XM-448BK, 39 English Troubleshooting In case of difficulty, check the following before calling for service. Treatment • Connect cables properly by referring to “Connection”. • Plug the power cord securely into the power outlet. • Use a recordable MD. • Close the accidental erasure protect tab of the MD. • Replace batteries with new ones. • Insert batteries with correct polarity. • Remove the obstacle. • Screen the direct sunlight. • Unplug the power cord, wait a few hours and plug it again. • Unplug the power cord then plug it in again. Cause • Cables are not connected properly. • The po

  • For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LVT0222-003A [E] INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS GEBRUIKSAANWIJZING MANUAL DE INSTRUCCIONES INSTRUZIONI XM-448BK MINIDISC RECORDER MINIDISC-REKORDER ENREGISTREUR MINIDISC MINIDI

  • 3 English Parts Index Become familiar with the buttons and controls before use. Refer to the pages in parentheses for details. Front panel ———————————————————————————— 1 PHONES jack (9) 2 PHONES LEVEL control (9) 3 DISPLAY/CHARACTER button (10, 26) 4 INPUT SELECTOR button (15) 5 Display 6 Jog dial (4, ¢/REC LEVEL) (9, 16) 7 1, ¡

  • JVC XM-448BK, 26 English Blinks Scrolls Blinks Scrolls Title name area Cursor (blinks) Alternately blinks Character set area Capital letters & Symbols Small letters & Symbols Numerals Assigning the disc title and track titles You can assign a title to each MD and to each track. Once a title is assigned, it is displayed for later playback for confirmation. Each title can be composed of up to 64 characters, and can be input using alphabetic characters — uppercase (A to Z) and lowercase (a to z), symbols (see “Available symbols” on the next page), and numerals (0 to 9). To assign a title using th

  • JVC XM-448BK, 21 English Blinks Blinks Decrements by 1 Blinks Blinks Blinks Blinks OR SET OR OR SET OR ENTER OR 1 2 3 4 5 6 1 2 3 4 5 6 Example) When track No. 1 and 2 are selected 1 2 3 4 5 6 1 2 3 4 5 2 Press SET on the main unit or on the remote control unit. 3 Select a track to be joined with the previous track. Select a track number by turning the jog dial on the main unit or by pressing < / 4 or ¢ / > on the remote control unit. • You can also use the numeric keys on the cover panel of the remote control to select a track number. To select a track, see “Selecting a track with the numeric keys” on page 9. Example) To join track

  • JVC XM-448BK, IMPORTANT FOR LASER PRODUCTS/ WICHTIGER HINWEIS FÜR LASER-PRODUKTE / IMPORTANT POUR LES PRODUITS LASER /BELANGRIJKE INFORMATIE VOOR LASERPRODUKTEN / IMPORTANTE PARA LOS PRODUCTOS LÁSER / IMPORTANTE PER I PRODOTTI LASER 2 WARNING LABEL, PLACED INSIDE THE UNIT 2 WARNETIKETTE IM GERÄTEINNEREN 2 ETIQUETTE D'AVERTISSEMENT PLACÉE À L'INTERIEUR DE L'APPAREIL 2 WAARSCHUWINGSLABEL, IN HET APPARAAT 2 ETIQUETA DE ADVERTENCIA, PEGADA EN EL INTERIOR DE LA UNIDAD 2 ETICHETTA DI AVVERTENZA, SITUATA ALL'INTERNO DELL'APPARECCHIO REPRODUCTION OF LABELS/ANBRINGUNGSORTE FÜR LASER-PRODUKTE/REPRODUCTION DES ETIQUETTES/ VERKL

  • JVC XM-448BK, 27 English • To enter a space, press ¡ to move the cursor to the right (or turn the jog dial to select a space, then press SET). • To move the cursor while entering a title, press 1 or ¡. • If you have entered an incorrect character, press 7STOP/CANCEL to cancel the last entry. To make a correction or change the title: 1 Press 1 or ¡ to move the cursor on an incorrect character, and press 7STOP/CANCEL. 2 Turn the jog dial to select the correct character, then press SET. To erase all the input characters: Press 7STOP/CANCEL repeatedly until all the inpu

  • JVC XM-448BK, 6 English AC IN DIGITAL IN TEXT COMPU LINK 1 (MASTER UNIT) 2 (SLAVE UNIT) LEFTRIGHT COMPU LINK- 3 (SYNCHRO) IN (REC) OUT (PLAY) ANALOG 1- OPTICAL- 2 Connection Signal cable connections —————————————— Audio pin cords Connect to the MD jacks, TAPE jacks, etc. of an external unit. Always connect the jacks with the plugs of the same colors so as not to fail in the L (Left) and R (Right) connections. Connect the OUT (PLAY) jacks to the IN (PLAY) jacks of the external unit, and the IN (REC) jacks to its OUT (REC) jacks. Example: Amplifier/Tuner Example: CD player Audio pin cord (supplied) Optical digital cable Connect to the DIGITAL

  • JVC XM-448BK, 20 English 5 Fine-adjust the track marking position. Turn the jog dial on the main unit or press < / 4 or ¢ / > on the remote control unit. The track marking position can be fine-adjusted in the range of ±128 positions (approx. ±8 sec.). As you adjust, the track marking is displaced slightly and the 4-second section from the newly divided point will be played repeatedly. • After completing the fine-adjustment, go to step 6. • To cancel the current track marking position, press 7STOP/CANCEL on the main unit or CANCEL on the remote control unit and repeat from step 3. 6 Press ENTER on the main unit or on the remote control unit. The change made above is entered temporarily in

  • JVC XM-448BK, 37 English MD Messages Treatment Use a recorded disc unless you want to start recording on a blank disc. This is one of system restrictions on the MD. [See page 38.] Use another MD. Use another recordable MD. Press 7STOP/CANCEL on the main unit or 7 on the remote control unit to enter Stop mode, then press 0 to eject the MD and retry recording. Load an MD. Stop recording. Use a recordable MD. Slide the protect tab of the MD. [See page 14.] This protection cannot be released by this MD recorder. To stop editing the protected track, press EDIT. Use the analog input for recording. Press INPUT SELECTOR to select the correct digital input. Description The loaded disc is a no

More Instructions:

DOWNLOAD

Related Products and Documents (Minidisc Recorder):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Alliance Laundry Systems 800532R3 Installation & operation manual alliance-laundry-systems/800532r3-8T4.pdf 31 Dec 2023 70 2.48 Mb
2 Aquatic SERENITY DRIFTBATH Owner's manual & installation manual aquatic/serenity-driftbath-9KB.pdf 09 Jan 2023 20 2.08 Mb
3 Focal Point REFLECTION Installation and user instructions manual focal-point/reflection-217.pdf 13 Feb 2024 19
4 Raymarine TH2 4 User reference raymarine/th2-4-XS8.pdf 25 Jul 2023 30
5 Ecler CA200z Operation & user’s manual ecler/ca200z-97H.pdf 08 Jul 2023 92
6 Whirlpool W10057250 Use and care manual whirlpool/w10057250-4L8.pdf 14 Mar 2023 28 0.84 Mb

Similar Resources:

  • Sony

    MZ-RH910

    (2 pages)
    Hi-MD™ Walkman® Digital Music PlayerMZ-RH910 TStep-up Feature'New FeatureTAbility to Record from Multiple Sources (Line/Mic In)TSelf Recording Upload FunctionT'5-Line LCDTDigital AmplifierT'New Sleek DesignTUp to 34.5 Hours1Battery Life with Rechargeable Battery and 1 "AA" BatteryO1GB2of Music Storage with One Hi-MD MiniDisc~ …
  • JVC

    MDP500

    (32 pages)
    OPERATINGINSTRUCTIONSLa versión en español del manual de operaciones la encontrará en la web de HHB – www.hhb.co.ukLa version Française de ce manuel d’utilisation est disponible sur le site web de HHB à www.hhb.co.ukEine deutsche Version dieser Bedienungsanleitung ist im Internet unter der Adresse www.hhb.co.uk erhältlich.HHB MDP500 PORTABLE MINIDI …
  • Sharp

    MD-MT180

    (64 pages)
    MD-MT180MODEL MD-MT180(S)SERVICE MANUALSHARP CORPORATIONNo. S4224MDMT180SThis document has been published to be usedfor after sales service only.The contents are subject to change without notice.PORTABLE MINIDISC RECORDER• In the interests of user-safety the set should be restored to itsoriginal condition and only parts identical to those specified beused …
  • Primera

    FX1200

    (64 pages)
    Operator’s Guide © 2012 All rights reserved. For the most recent version of this manual please visit http://www.primera.com/manuals.htm511242-070912 …
  • JVC

    XM-448BK

    (45 pages)
    For Customer Use:Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference.Model No.Serial No.LVT0222-003A[E]INSTRUCTIONSBEDIENUNGSANLEITUNGMANUEL D’INSTRUCTIONSGEBRUIKSAANWIJZINGMANUAL DE INSTRUCCIONESINSTRUZIONIXM-448BKMINIDISC RECORDERMINIDISC-REKORDERENREGI …
  • Aiwa

    AM-F5

    (10 pages)
    S E R V I C E M A N U A LSIMPLE MANUAL• Replace this Service Manual with ”Revision Publishing” when it is issued.AM-F5• BASIC MD MECHANISM: 7ZG–1 R1• TYPE: AHES/M Code No. 09–985–265–5FEMINI DISC RECORDER …

Comments, Questions and Opinions: