2Wire third-party wireless Ethernet adapters Configuration Manual

Text of 2Wire third-party wireless Ethernet adapters User Guide:

• 2Wire third-party wireless Ethernet adapters, Notice to Users ©2002 2Wire, Inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval. 2WIRE PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION, IN NO EVENT SHALL 2WIRE, INC. BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTW

• 2Wire third-party wireless Ethernet adapters, Contents Wireless Client Configuration Guide Introduction ........................................................................................................................................... 1 Locate the serial number and wireless encryption key ......................................................................... 1 Agere ORiNOCO PC Card - Silver or Gold .......................................................................................... 2 Cisco Aironet .......................................................

• 2Wire third-party wireless Ethernet adapters, 1 Wireless adapter configuration Introduction After your 802.11b wireless adapter is installed in your computer, you must configure it to communicate with the HomePortal. This guide describes how to configure the following wireless Ethernet (IEEE 802.11b) adapters to operate with the HomePortal: • Agere (ORiNOCO PC Card Silver or Gold) • Cisco (Aironet 340 Series 11Mbps Wireless LAN Adapter) • D-Link Air DWL-650 • Apple AirPort card • Other third-party wireless Ethernet cards Note: The instructions for Agere, Cisco, and D-Link cards are for computers running Windows 98. The instructions for the Apple card are for computers running MacOS 9.

• 2Wire third-party wireless Ethernet adapters, 2 Agere ORiNOCO PC Card - Silver or Gold Consult the documentation provided with your wireless adapter to install the Agere ORiNOCO PC Card - Silver or Gold, then follow these steps: 1. From the Start menu, select Programs > ORiNOCO > Client Manager. The ORiNOCO Client Manager screen appears. 2. From the Actions menu, select Add/Edit Configuration Profile. 3. The Add/Edit Configuration Profile screen appears.

• 2Wire third-party wireless Ethernet adapters, 3 4. To create your profile, click Add. The Edit Configuration screen appears. Enter a profile name in the Profile Name field. The profile name identifies your wireless profile, and should be no more than 29 characters in length. 5. From the Network Type pulldown menu, select Access Point. 6. To identify your network, click Next. The Edit Configuration screen appears. 7. In the Network Name field, enter the word “2WIRE” followed by the last three digits of your HomePortal serial number, located on the bottom of your HomePortal. This is the Wireless Network Name. The Wireless Network Name is case-sensitive, so it is important that you enter the word “

• 2Wire third-party wireless Ethernet adapters, 4 8. Click Next. In the Set Security field, check the Enable Data Security checkbox. Verify that the Use Hexadecimal (0-9, a-f, A-F) radio button is selected. 9. In the Key field, enter your ten-digit Wireless Encryption Key, located on the bottom of your HomePortal. 10. Verify that Key 1 is selected in the Encrypt data with pulldown menu (this is the default). 11. To select a power management option, click Next. The following screen appears. 12. Select the power management option that you wish to use (the default is Off), and click Next.

• 2Wire third-party wireless Ethernet adapters, 6 Cisco Aironet Consult the documentation provided with your wireless card to install the Cisco Aironet adapter, then follow these steps: 1. Double-click the Aironet Client Utility icon on your desktop. The Aironet Client Utility screen appears. 2. Click the Profile Manager button. The Profile Manager screen appears. 3. Click Add. 4. In the Profile Management field, enter your profile name. The profile name identifies your wireless profile, and should be no more than 29 characters in length. 5. C

• 2Wire third-party wireless Ethernet adapters, 7 6. Select the System Parameters tab. In the Client Name field, enter a client name. The client name identifies your PC. 7. In the SSID1 field, enter the word “2WIRE” followed by the last three digits of your HomePortal serial number. This is the Wireless Network Name. The Wireless Network Name is case-sensitive, so it is important that you enter the word “ 2WIRE” in capital letters. 8. In the Power Save Mode field, verify that the CAM (Constantly Awake Mode) radio button is selected (this is the default). 9. In the Network Type field, verify

• 2Wire third-party wireless Ethernet adapters, 8 13. Click OK. The Profile Manager screen appears. Your profile name should now appear in the second line of the Profile Management field, indicating that your Cisco adapter is properly configured. 14. Click OK.

• 2Wire third-party wireless Ethernet adapters, 9 D-Link Air DWL-650 Consult the documentation provided with your wireless adapter to install the D-Link Air DWL-650, then follow these steps: 1. From the Start menu, select Programs > D-Link DWL-650 Control Utility > Configuration Utility. 2. The D-Link Air DWL-650 Configuration screen appears.

• 10 3. Select the Configuration tab. 4. In the Mode field, enter Infrastructure. 5. In the SSID field, enter the word “2WIRE” followed by the last three digits of your HomePortal serial number. This is the Wireless Network Name. The Wireless Network Name is case-sensitive, so it is important that you enter the word “ 2WIRE” in capital letters. 6. In the Tx Rate pulldown menu, verify tha

• 2Wire third-party wireless Ethernet adapters, 11 13. From the Default Tx Key pulldown, select 1. 14. Click Apply. 15. Click OK. Apple AirPort card Note: Requires AirPort client software revision 2.0 or greater. Consult the documentation provided with your wireless adapter to install the Apple AirPort wireless adapter, then follow these steps: 1. From the Apple pull-down menu, select AirPort to open the AirPort dialog box. 2. In the AirPort Network panel, click the Choose Network pull-down menu.

• 12 3. Select your wireless network name. Your wireless network name is “2WIRE” followed by the last three digits of your HomePortal serial number, located on the bottom of your HomePortal. 4. In the Password field, enter “$” followed by your ten-digit Wireless Encryption Key, located on the bottom of your HomePortal. 5. Click OK. Other wireless Ethernet adapters No

• 2Wire third-party wireless Ethernet adapters, 13 3. Enable wireless security. Your HomePortal is pre-configured to take advantage of wireless security. Referring to the instructions provided with your wireless card, enable wireless security. Wireless security is sometimes referred to as WEP (wired equivalent privacy), 64-bit encryption, or 40- bit encryption . 4. Enter the encryption key. Once you have enabled security on your wireless card, you need to enter the unique security key for your HomePortal. To do this, set the network encryption type to hexadecimal, and enter your 10-digit wireless encryption key found on the bottom of your HomePortal. 5. In general, accept your ca

• 14 3. The Connect to Wireless Network screen appears. In the Available networks field, select your wireless access point. The wireless access point displays as “ 2WIRE” in all capital letters, followed by the last three digits of the HomePortal serial number (located on the bottom of your HomePortal). 4. In the Network key field, enter your ten-digit Wireless Encryption Key, lo

Related Products and Documents (Network Card):

Comparable Devices:

Similar Resources:

• Renesas Converter Board for M30102 M30102T-PTC (4 pages) ( 1 / 4 )M30102T-PTCConverter Board for M30102User's ManualKeep safety first in your circuit designs!• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and morereliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may …

• Hitachi WJ200 Series Software (15 pages) • WJ200 Series • SJ700 Series 115VIF-DIN 115 VAC Input Interface Board Instruction & Software Manual For Crane & Hoist Pendant Applications Hitachi America, Ltd. Manual Number: HAL1055D January 2013 After reading this manual, keep it handy for future reference. NOTE: REFER ALSO TO WJ200 OR SJ700 S …

• M-system R3-GD1 (4 pages) 5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPANPhone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected] Rev.2 P. 1 / 4INSTRUCTION MANUALDeviceNet INTERFACE MODULE(for 64-point analog signals)MODELR3-GD1BEFORE USE ....Thank you for choosing M-System. Before use, please check contents of the package you received as outlined …

• Lava Computer Lava Port 650 (1 pages) www.lavalink.com2 Vulcan StreetToronto, ONCanada M9W 1L2Tel:Fax:Email:[email protected] Bus Single 16550 Serial Port BoardFeatures & BenefitsConnectorsSystem RequirementsllllllllllAdds one 9-pin 16650 UART serial port toPCI-equipped PCsPort is capable of a maximum data throughputrate up to 460.8 kbpsIntegrated 32-b …

• Dell PowerEdge M420 (32 pages) Information Update—Support for PowerEdge C410x on M610x, R710, and R410 SystemsBIOS InformationThe minimum BIOS versions required to support the C410x are:• v6.0.7 for R710 systems• v1.8.2 for R410 systems• v6.0.7 for M610x systemsDisabling Spread Spectrum Clocking ModeTo enable support for the C410x chassis, set a reserved CMOS location, which disab …

• ZyXEL Communications ZyWALL 70 (2 pages) ZyWALL 70FeaturesRecommended forSpecificationsApplication DiagramVirtual Private Network• 100 simultaneous IPSec VPN Connections• Max. 50Mbps 3DES/AES VPN performance• Manual Key, IKE and PKI (X.509)• IPSec NAT TraversalFirewall Security• Transparent Firewall (bridge mode)• Stateful Packet Inspection• DoS and DDoS Protection• Real-time Attack …

Comments, Questions and Opinions: