Manualios.com

Asus RS700-E7/RS8 Operation & User’s Manual

Asus RS700-E7/RS8 Manual Online:

3.3, 1983 votes
Asus RS700-E7/RS8 User Manual
Asus RS700-E7/RS8 User Guide
Asus RS700-E7/RS8 Online Manual

Text of Asus RS700-E7/RS8 User Guide:

  • Asus RS700-E7/RS8, Chapter 2: Hardware setup2-24 2. Press the latch leftward, and push the slim optical drive toward the front panel. 2.8.3 Slim type optical drive (optional) To uninstall the slim optical drive: 1. Disconnect the SATA power and cable, then locate the optical drive eject latch at the rear side.

  • Asus RS700-E7/RS8, ASUS RS700-E7/RS8 6-11 6.2.2 AddingorviewingaRAIDconguration You can add a new RAID conguration or view an existing conguration using the View/AddConguration command. AddinganewRAIDconguration To add a new RAID conguration: 1. From the Management Menu , select Congure>View/AddConguration , and then press <Enter>. 2. The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Select the drive(s) you want to include in the RAID set, then press <Space>. When selected, the drive indicator changes from READY to ONLIN A[X]-[Y] , where X is the array number, and Y is the drive nu

  • Asus RS700-E7/RS8, 6-30 Chapter 6: RAID conguration 6.3.4 Resetting disks to Non-RAID Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive. To reset a RAID set hard disk drive: 1. From the utility main menu, select 3. Reset Disks to Non-RAID and press <Enter>. The following screen appears. 2. Use the up/down arrow keys to select the RAID set drive(s) you want to reset, and then press <Space> to select. 3. Press <Enter> to reset the RAID set drive(s). A

  • Asus RS700-E7/RS8, ASUS RS700-E7/RS8 6-9 12. When nished setting the selected virtual drive conguration, select Accept from the menu, and then press <Enter>. Management Menu Congure Initialize Objects Rebuild Check Consistency PORT # LSI Software RAID Conguration Utility Ver C.05 Sep 17, 2010 BIOS Version A.10.09231523R DNLIN A00-00 DNLIN A00-01 0 1 Easy Conguration - ARRAY SELECTION MENU Virtual Drive(s) Congured LD RAID Size #Stripes StripSz Status 0 1 148.580GB 2 64 KB ONLINE Virtual Drive 0 RAID = 1 Units= MB Size = 152146MB DWC = Off RA = On Accept SPAN = NO

  • Asus RS700-E7/RS8, 5-42 Chapter 5: BIOS setup 5.5.2 BMCnetworkconguration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Server Mgmt Select to congure LAN channel parameters statically or dynamically(by BIOS or BMC). Unspecied option will not modify any BMC network parameters during BIOS phase BMC network conguration DM_KAN1 DM_LAN1 IP Address in BMC: 192.168.001.001 DM_LAN1 Subnet Mask in BMC: 255.255.255.000 DM_LAN1 Gateway Address in BMC : 000.000.000.000 DM_L

  • ASUS RS700-E7/RS8 7-25 5. Read the Warning message and click Next to continue. 6. Read the License Agreement and click Yes to continue. 7. Read the Readme File Information and click Next to continue.

  • Asus RS700-E7/RS8, 4-12 Chapter 4: Motherboard information 9. System panel connector (20-pin PANEL1 [white]) This connector supports several chassis-mounted functions. 1. System power LED (3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. 2. Message LED (2-pin MLED) This 2-pin connector is for the message LED cable that connects to the front message LED. The message LED is controlled by Hardware

  • Asus RS700-E7/RS8, ASUS RS700-E7/RS8 6-23 6.2.8 Enabling WriteCache You may manually enable the RAID controller’s WriteCache option after creating a RAID set to improve the data transmission performance. When you enable WriteCache, you may lose data when a power interruption occurs while transmitting or exchanging data among the drives. The WriteCache function is recommended for RAID 1 and RAID 10 sets. To enable WriteCache 1. From the Management Menu , select Objects > Adapter , select an existing adapter, and then press <Enter> to display the adapter properties. 2. Select Disk WC , an

  • Asus RS700-E7/RS8, ASUS RS700-E7/RS8 5-31 USB Hardware Delays and Time-outs USB transfer time-out [20 sec] The time-out value for control, bulk, and interrupt transfer. Conguration options: [1 sec] [5 sec] [10 sec] [20 sec] Device reset time-out [20 sec] USB mass storage device start unit command time-out. Conguration options: [10 sec] [20 sec] [30 sec] [40 sec] Device power-up delay [Auto] Maximum time the device will take before it property reports itself to the Host Controller. ‘Auto’ uses default valus: for a Root port it is 100ms, for a Hub port the delay is taken from Hub descriptor. Conguration options: [Auto] [Manual] The following item appears only when you set

  • Asus RS700-E7/RS8, Chapter 1: Product introduction1-4 *Specicationsaresubjecttochangewithoutnotice. Model Name RS700-E7/RS8 HDD Bays I = internal A or S will be hot- swappable 8 x Hot-swap 2.5” SATA/SAS HDD Bays* * ASUS PIKE RAID card is required for the HDDs to be recognized for system boootup. Networking LAN 4 x Intel ® I350-AM4 + 1 x Mgmt LAN Graphic VGA Aspeed AST2300 + 16MB VRAM Onboard I/O 5 x RJ-45 ports (1 for ASMB6-iKVM) 4 x USB 2.0 ports (Front x 2, Rear x 2) 1 x VGA port 1 x PS/2 keyboard port 1 x PS/2 mouse port OS Support Windows ® Server 2008 R2 Windows ® Server 2008 Enterprise 32 / 64-bit Windows ® Server 2003 R

  • ASUS RS700-E7/RS8 6-7 5. Press <F10> again, the virtual drive information appears including a Virtual Drive menu that allows you to change the virtual drive parameters. 6. Select RAID from the Virtual Drive sub-menu, and then press <Enter>. 7. Select the RAID level from the menu, and then press <Enter>. Management Menu Congure

  • Asus RS700-E7/RS8, Chapter 2: Hardware setup2-8 2. Twist each of the four screws with a Philips (cross) screwdriver just enough to attach the heatsink to the motherboard. When the four screws are attached, tighten them one by one to completely secure the heatsink. 2.2.2 Installing the CPU heatsink To install the CPU heatsink: 1. Place the heatsink on top of the installed CPU, ensuring that the four fasteners match the holes on the motherboard. Tighten the four heatsink screws in a diagonal sequence. A B B A

  • vii Safety information Electrical Safety • Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged. • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing any additional devices to or from the

  • Asus RS700-E7/RS8, ASUS RS700-E7/RS8 6-19 3. When prompted, use the arrow keys to select Yes from the Consistency Check? dialog box, and then press <Enter>. A progress bar appears on screen. 4. While checking the disk consistency, press <Esc> to display the following options. • Stop - Stops the consistency check. The utility stores the percentage of disk checked, and when you restart checking, it continues from the last percentage completed rather than from zero percent. • Continue - Continues the consistency check. • Abort - Aborts the consistency check. When you restart checking

  • Asus RS700-E7/RS8, 6-4 Chapter 6: RAID conguration 3. The utility main window appears. Use the arrow keys to select an option from the Management Menu and then press <Enter>. Refer to the Management Menu descriptions on the next page. At the bottom of the screen is the legend box. The keys on the legend box allow you to navigate through the setup menu options or execute commands. The keys on the legend box vary according to the menu level. 6.2 LSISoftwareRAIDConguration Utility The LSI MegaRAID software

  • Asus RS700-E7/RS8, 7-4 Chapter 7: Driver installation To create a RAID driver disk in Windows ® environment: 1. Start Windows ® . 2. Place the motherboard support DVD into the optical drive. 3. Go to the Make disk menu, and then select the type of RAID driver disk you want to create. 4. Insert a oppy disk into the USB oppy disk drive. 5. Follow succeeding screen instructions to complete the process. Write-protect the oppy disk to avoid computer virus infection. To create a RAID driver disk in Red Hat ® Enterprise Linux server environment: 1. Insert a blank formatted high-density oppy disk to the USB oppy disk drive. 2. Type dd if=XXX.img of=/dev/fd0 to decompress t

  • 6-34 Chapter 6: RAID conguration You can click Rescan to re-scan any attached hard disks. 6.4 Intel ® Rapid Storage Technology enterprise Utility (Windows) The Intel ® Rapid Storage Technology enterprise utility allows you to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial ATA connectors su

  • Asus RS700-E7/RS8, 4-10 Chapter 4: Motherboard information 6. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. The serial port module is purchased separately. ® Z9PP-D24 PIN 1 COM1 Z9PP-D24 Serial port connector 5. USB connectors (10-1 pin USB34, USB56, Type A USB10) The USB34 and USB56 connectors are for USB 2.0 ports. Connect the USB module cable to the connectors, and then install the module to a slot opening at the back of the system chassis. The USB10 connector is for a A-type internal USB 2.0 device. The USB co

  • Asus RS700-E7/RS8, ASUS RS700-E7/RS8 4-7 6. Baseboard Management Controller (BMC) Setting (3-pin BMC_EN1) This jumper allows you to enable (default) or disable on-board BMC. ® Z9PP-D24 Z9PP-D24 BMC_EN 21 2 3 Enable (Default) Disable BMC_EN1 PIN1 PIN1

Related Products and Documents (Server):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Telkom Palmtalk Instruction manual telkom/palmtalk-W5I.pdf 30 May 2023 21
2 Makita GV7000C Parts breakdown makita/gv7000c-LUG.pdf 22 Dec 2022 2
3 Net2Phone MAX IP10 Operation & user’s manual net2phone/max-ip10-W9A.pdf 07 Aug 2023 26
4 Garmin 76Cx Quick reference manual garmin/76cx-4CI.pdf 31 Jul 2023 2 0.66 Mb
5 Samsung 197T Operation & user’s manual samsung/197t-378.pdf 06 Nov 2023 57 22.17 Mb
6 Philips 109B20 Technical specifications philips/109b20-UFM.pdf 01 Apr 2023 2 0.23 Mb

Similar Resources:

  • Acer

    AW2000ht-AW170ht F1

    (92 pages)
    Acer AW2000htService Guide PART NO.: PRINTED IN TAIWAN …
  • Samsung

    SRD-1670D

    (2 pages)
    SRD-1670/1670D/1670DC• 16ch 4CIF real-time DVR • Video (H.264) / Audio (ADPCM) • Up to 480 (NTSC) / 400 (PAL)ips recording rate• Up to 16ch audio inputs and 1ch audio outputs • Combined BNC and VGA/HDMI video output for main display • SRD-1670 : Max 6 internal HDD (HDD x 6) SRD-1670D : Max 5 internal HDD (HDD x 5)• HDD & DVD SATA inte …
  • Dell

    8450

    (32 pages)
    Dell™ PowerEdge™ 8450 Systems™www.dell.comsupport.dell.comINFORMATION UPDATEMise à jour des informationsInformationsaktualisierungActualización de información …
  • HP

    MPX200

    (258 pages)
    HP MPX200 Multifunction Router User GuideAbstractThis document describes the MPX200 Multifunction Router, which supports HP 3PAR StoreServ, P6000 EVA, and P9000/XPfamilies of Fibre Channel storage systems for integrated iSCSI connectivity, FCIP, FCoE, and data migration (see the DataMigration Services User's Guide).This document is intended for system a …
  • HP

    ProLiant SL270s Generation 8

    (48 pages)
    QuickSpecs HP ProLiant SL270s Generation 8 (Gen8) Overview c04123204 -DA – 14405 Worldwide — Version 24 — March 30, 2015 Page 1 HP ProLiant SL270s Generation 8 (Gen8) The HP ProLiant SL270s Gen8 Server is part of the HP ProLiant SL6500 Scalable System of server solutions designed for the Hyperscale and High Performance Computing (HPC) market segm …
  • Cisco

    TelePresence Server 7010

    (132 pages)
    Cisco TelePresenceServer 7010 and MSE8710in Locally Managed ModePrinted Help4.0D15073April 2014Cisco TelePresence Server 7010 and MSE8710 in Locally Managed Mode Printed Help (4.0) Page 1 of 132 …

Server Instructions:

Comments, Questions and Opinions: