AX-A, AX-AN (Surface Mount); AX-B, AX-BN (Semi-Flush Mount)- INSTRUCTIONS -The AX-A, AX-AN, AX-B, and AX-BN are interior sub stations designed for use with the AX system. The AX-A and AX-AN sub stations are surface mount and will mount to a single gang box or can be set on a desk or table top. The AX-B and AX-BN sub stations are semi-flush mount and can be …
www.lorextechnology.comLW2401/LW2450/LW2451 Quick Start Guide_R4 Page 1WIRELESS VIDEO MONITORLW2401/LW2450/LW2451 QUICK START GUIDENOTE: AVOID INSTALLING IN A LOCATION WHICH REQUIRES THE WIRELESS SIGNAL TO PASS THROUGH CEMENT, CONCRETE AND METAL STRUCTURES. THIS WILL REDUCE THE TRANSMISSION RANGE.Getting StartedThis wireless video monitor comes with the foll …
Mandatory ProgrammingProgramming a User Code is mandatory when using the Code Encryptor II. Thisgives the Code Encryptor microprocessor a User Code to arm and disarm the panel.You must use a 4 digit code ONLY. The CEII will not operate properly if you teach it a 3 or 5 digit user code.Step 6) Verify that the four-digit code you plan to teach the Code Encrypt …
Page 1 DAS DL150 Alarm Dialler wiring & programming RDC_3033_E_TA DAS DL150 Alarm Panel Panel Dialler wiring Panel Dialler programming Background: The PM45 & PM1048-3G (v3) communicator now has a terminal block for the connection of the female 611 fly lead (supplied). If the Alarm Panel also has a terminal block f …
Thank you for purchasing this product, and it is made with three special functions as Built-in 360-degree detector / 3 different alarm sounds / Waterproof design.Please read the manual carefully before using it and then keep this manual on file for future reference.-1-ACBFucntion Switch & IllustrationA. Volume : from OFF to MAX by turning the switch fro …