Overview of The Vessels Navigation System ! Give a general overview of what is installed on the vessel and explain that data is shared between all navigation devices on the vessel. ! Point out that button functions in white text require a single key press while those in red require a press and hold MultiFunction Navigation System (B&G Zeus Touch …
Your journey, Our technologyUltra EFISUser and Installation ManualProduct model number: UX0EFS3xAM / UX0EFS5xAMSoftware: version 5.21.2R or more recent Firmware: version 3.15 or more recentIMPORTANT: Before using this manual check if your Ultra product model number corresponds to the above model number.
…
5.5" (140.00 mm)4.25" (108.00 mm)DRILL A 3/8" (6 mm) HOLE TO START CUTTING.CUT THE MOUNTING SURFACE ON THE INSIDE OF THIS LINE.DRILL THE 1/8" (3 mm)MOUNTING HOLES BEFORE CUTTING.Be very careful when cutting. There is 1/8” clearance between the case and the mounting stud holes. If the cutout is tight, fileor sand the cutout to obtain the …
CT-326-C Current TracerProbe Range Switch1. Range switch determines the probe’s gain.2. If the probe displays 10 LEDs, gain is too sensitive. Turn switch to lower setting.Identify Circuit Breaker (Fig. 2)1. Connect the transmitter to a source of power. 2. Set the probe’s range switch to BREAKERS-3.3. Push ON and wait for it to calibrate.4. Hold the …