Drill through the four holes in the base of the unit using 6mm dia masonry drill to a depth of 70mm. Screw in the anchor fixings. (These have a self cutting thread). If not anchoring the unit, fit the self seal plugs BEFORE BUILDING to seal the fixing holes from underneath. TOOLS REQUIREDPower driver POSI-DRIV screwdriver, 6mm dia. masonry drill, a 13mm soc …
It is always recommended to anchor the unit to the ground. Drill through the four holes in the base rails of the unit using 6mm dia masonry drill to a depth of 70mm. Screw in the anchor fixings. (These have a self cutting thread). Additional ZHWNUT42 and ZSCREW254 have been supplied for bolting 2 units together using the side panels.TOOLS REQUIREDPower drive …
GAS BOTTLE STORAGE (SML)For maintenance instructions of this product visit www.asgardsss.co.uk036139 x2ZCOMPPLAS22-23-24 x62x 2mm, 2x 3mm, 2x 5mmZSCREW32 x42KEY02 x1ZSCREW340 x66mm Dia.10mm Spanner18Vx2Posi-DrivScrewdriverDrill through the four holes in the base of the unit using 6mm dia masonry drill to a depth of 70mm. Screw in the anchor fixings. (T …
THINK GREENPrzy naszych produktach znajdziesz wydrukowane instrukcje obsługi wyłącznie w języku polskim oraz angielskim.Jeśli potrzebujesz więcej to na kolejnych stronach znajdują się instrukcje obsługi w językach :There is a printed manual in English and Polish languages added to each our product.If you need more, you will find manuals in …
FLEXISTORE 1533BASE INSTRUCTIONSFlat and firm base. Recommended: concrete, tarmac or paving flags. Min. distance from walls/ shrubbery: 1000mm.Min. base size (WxDxH) 1730mm x 3770mm x 50mm.LEVELING THE UNITCorrectly level the constructed unit using the shims (ZCOMPPLAS) provided prior to fixing the unit to the ground. Slide the packing pieces under the corne …
It is always recommended to anchor the unit to the ground. Drill through the four holes in each of the base of the unit using 6mm dia masonry drill to a depth of 70mm. Screw in the anchor fixings. (These have a self cutting thread). If not anchoring the unit, fit the self seal plugs BEFORE BUILDING to seal the fixing holes from underneath. Please note produc …
It is always recommended to anchor the unit to the ground. Drill through the four holes in each of the base of the unit using 6mm dia masonry drill to a depth of 70mm. Screw in the anchor fixings. (These have a self cutting thread). If not anchoring the unit, fit the self seal plugs BEFORE BUILDING to seal the fixing holes from underneath. Please note produc …