CRM 202-RF Installation guide 1) Drill a 58mm (2.25”) hole through the table see fig A. 2) Remove the nut and fit the CRM 202-RF through the 58mm (2.25”) hole see fig B. 3) Replace nut and tighten to the underside of the table see fig C. 4) Connections for each mic A + B will be identified: mic A has white sleeved cable, mic B has black sleeve and …
1) Drill a 58mm (2.25”) hole through the table see g A. 2) Remove the nut and t the CRM 203-RF through the 58mm (2.25”) hole see g B. 3) Replace nut and ghten to the under-side of the table see g C. 4) Connecons for each mic a + b + c will be idened as follows: mic a (in line with screws) uses white cable, mic b + c have black …
AShThcohatataa mThanm AShIt deteadohwanmThSMrchitects anhock Mounthe shock absoonstruction aave a hinged able once the able to be use3 or 5 pin XLRmicrophones the microphonnd black Nextmount shall be PROFA low p rchitects anhock Mountshall come coesigned to poerminated witdaptor shall ahms. The phawhich shall elimnd b …
PROFESSIONAL MICROPHONE SYSTEMSCU 2An Intelligent battery management system designed for use with Clockaudio CW 9004T, CW 9005T andCW 9006T wireless base transmitters.CAUTION: Alwaysturn off the wirelessmicrophonetransmitter beforeputting thetransmitter in to thecharger.Placetransmitter into chargingbayProcessor controlledBuilt-in active monitoring systemTem …