Digiplex Manuals

Top User Guides by Digiplex:

• Digiplex IP Access Controllers DGP-NE96 Programming manual (48 pages) www.paradox.caHIGH SECURITY AND ACCESS CONTROL SYSTEM (DGP-NE96)PROGRAMMING GUIDESoftware Version V1.0DEFAULT INSTALLER CODE000000 (To modify the installer code, refer to section [1000], “Installer Code Programming” on page21)DEFAULT SYSTEM MASTER CODE1234 or 123456 HOW DO I ENTER PROGRAMMING MODE?STEP 1: Press and hold the [0] keySTEP 2: Enter your …

• Digiplex Security System EVO641 Operation & user’s manual (36 pages) User GuideFor EVO SystemsWe hope this product performs to your complete satisfaction. Should you have any questions or comments, please visit www.paradox.com and send us your comments.EVO641 / EVO641RDGP2-641BL / DGP2-641RBDGP2-648BL …

• Digiplex Control Unit DGP2-ZC1 Instructions (2 pages) EnglishThe DGP2-ZC1 is used to protect doors and windows. Typically, a magnet (included) is mounted on a door or window and the contact switch is mounted on the door frame or windowsill (see Figure 1). An open zone signal is sent through the combus to the control panel when the magnet moves away from the reed switch (included). When the magnet returns to its …

• Digiplex Power Supply DGP2-PS17 Manual  (2 pages) Power Supply Module V1.0(DGP2-PS17)InstructionsDGP2PS17-EI00INTRODUCTIONThe Power Supply Module (DGP2-PS17) is a fully supervised 1.7A switchingpower supply that is connected to the communication network of the Digiplex(DGP-48) or DigiplexNE (DGP-NE96) control panel.INSTALLATIONThe DGP2-PS17 is connected to the control panel's communicationnetwork in a …

• Digiplex Control Unit DGP2-ZX1 Reference manual (2 pages) One-zone Hardwire Module V2.0(DGP2-ZX1)InstructionsDGP2ZX1-EI02The One-zone Hardwire Module (DGP2-ZX1) is an interfacebetween the Digiplex (DGP-48) or DigiplexNE (DGP-NE96) controlpanels and any hardwired detection devices. The DGP2-ZX1connects to the Digiplex/DigiplexNE control panels’ communicationnetwork providing you with one additional hardwired inp …

• Digiplex IP Access Controllers Paradox ACM12 Installation instructions and instructions for use (2 pages) Access Control Module V4.2ACM12Installation Instructionsparadox.comPrinted in Canada 05/2014 ACM12-EI02IntroductionThe Access Control Module (ACM12) is designed to be used with the Digiplex EVO System control panels. Each ACM12 allows you to connect a reader, a REX device, a door contact and a locking device to control the acces …

• Digiplex Control Unit EVO DGP2-ANC1B Instructions (2 pages) INTRODUCTIONThe Annunciator Module (DGP2-ANC1B) is a status display device that is connected to the control panel’s four-wire combus as a stand-alone module or mounted on a keypad. Set the DGP2-ANC1 to display the status of up to eight partitions, zones 1 to 48 or zones 49 to 96.LED FEEDBACKPROGRAMMING METHODTo program the DGP2-ANC1B, you must enter the Mo …