Memco Manuals

Top User Guides by Memco:

• Memco Telephone System C100 Series Installation manual (71 pages) Memco® C100 Base Variants 1 and 2Ref No. C100 851 (ML) Version 4Dimensions (mm)This Base 2 variant of the product can be installed behind the COP and has an integrated relay, LED indicators and an inductive loop.The Memco C100 is a COP based emergency telephone system. It has been designed to provide quick and easy COP installation and is also the rst …

• Memco Security Sensors Panachrome Installation manual (3 pages) 1. Detector InstallationThe Panachrome 43mm 3D/2D detectors can be tted to centre-opening or side-opening doors. For the visual indicators to be eective, the system should only be installed in dynamic mode, with at least one of the detectors xed to a moving door. TX detector must be tted to left side of lift when viewed from landing.Memco Panachr …

• Memco Intercom System 492 021 Installation manual (2 pages) 492 021 Memcom MPSInstallation GuideTerminal Connection Block in MemcomThe Memcom Multi Point Station (MPS) provides external emergency telephone points for the lift engineer in the shaft, pit or machine room. This easy to install unit also allows local communication between dierent points of the lift installation through an intercom channel, which is a …

• Memco Gateway Avire 2G GSM Installation manual (42 pages) Avire 2G GSM GatewayInstallation GuideProduct Part No. 452 002/MLEDThe Avire 2G GSM gateway has 2 LEDs that indicate the device status2G GSM GatewayGSMStatusLED STATUS DESCRIPTIONStatusOFFFast BlinkingPower supply not connectedPower supply connectedGSMOFFSlow BlinkingONFast BlinkingGSM Network Searching, Low GSM Signal Level, SIM card not present, PIN not in …

• Memco Controller Panachrome+ G3850 Installation manual (63 pages) 2. Installation1. Secure the Panachrome+ Controller in a suitable position on top of car to avoid damage.2. Connect the Controller with the correct supply voltage and Inputs (see Fig 3 below)3. Once the detectors are installed (see detector installation guide) it is important to ensure that the detector cables & travelling cables (015 455) are secured t …

• Memco Telephone C100 Installation manual (7 pages) The Surface Mount 4 variant of the product can be surface mounted on the COP and has integrated speaker and microphone.Memco® C100 Surface Mount Variants 4, 5 & 6Ref No. C100 855 (GB) Version 2Dimensions (mm)SM4The Surface Mount 5 variant of the product can be surface mounted on the COP and has integrated speaker, microphone and pictograms.The Surface …