Manualios.com

Nikon Microphone Manuals

Nikon Microphone User Guides: 4 Documents Found

Found: 2 product(s)

Categories
Document
Nikon ME-1 Microphone Operation & user’s manual
Nikon ME-W1 Microphone Operation & user’s manual

Microphone User Guides:

  • Ampetronic Q400

    The Q400 is a directional electret boundary layer microphone. It is designed to be connected to unbalanced microphone inputs with bias powering such as those found on the Ampetronic and ILD100 & CLD1 induction loop amplifiers. The unit is directional when properly mounted, so it can reduce unwanted sound pickup from sources that are not in front of the m …

  • Broadcast & Production MicroSet BP892x

    User ManualMicroSet® Omnidirectional Condenser Headworn Microphones BP892x / BP892xTH ■Features■Notes on use ■Connection procedureThis product requires 48 V DC phantom power.Output terminalsPIN1 (ground)PIN3 (cold)PIN2 (hot) ■SpecificationsFixed-charge back plate, permanently polarized condenserOmnidirectional20-20,000 Hz80 Hz, 18 dB/octave (wi …

  • AKG 2820X00210

    SERVICE MANUAL / # 2820Z(X)00XX0 / 07/2016 AKG CUSTOMER SERVICE DEPARTMENT / Laxenburger Straße 254 / 1230 Vienna, Austria TEL: +43 1 866 54-0 / FAX: +43 1 866 54-1514 / [email protected] / www.akg.com 1/6 C4000B 2820Z00010 (metallic) C4000 2820X00210 6 7 1 2 4 3 10+11 5 13 8 6.2 6.3 6.1 6.3 7.1 9 12 14, 1 …

  • Monster iSport SPIRIT 401901

    Power On/ Power OffPress the Multi-function button for about 1 second to power on the headphone. To power off the headphone, press the Multi-function button for about 3 seconds.Volume ControlPress the Volume " + " or " -" to turn volume up or down, you hear "dudu" once you reach the maximum volume or minimum volume.Guide to Indi …

  • ETS SM1-P-SS-LN

    SM1-P-SS-LN Microphone Instructions The SM1-P-SS-LN is a high quality, ULTRA low noise, high sensitivity, universally powered, flush mount, omni-directional, pre-amplified microphone with enhanced features for use with DRVs, I/P cameras, etc. Note- the audio output of the SM1 is jumper selectable “line level” (0db) or “microphone level� …